Charger Forums banner

1 - 15 of 15 Posts

·
Registered
Joined
·
507 Posts
Yep I have put them in as well as a lot of other members. Just Google it and you will find everything you need to know.
 

·
Registered
Joined
·
507 Posts
If you run into any problems or have any install questions don't hesitate to ask.
 

·
Registered
Joined
·
25 Posts
Discussion Starter #5
Thanks alot sconnell greatly appreciate it. Itll be a little bit before I get to it. Im workin on putting my danko chin spoiler on as soon as it gets warm. Thanks again
 

·
Registered
Joined
·
507 Posts
You may want to do both projects at the same time. You have to take the front fascia off to swap the headlight housings. Best time to fit the chin spoiler on.
 

·
Registered
Joined
·
25 Posts
Discussion Starter #7
Yea I no. I had it off once before to put my halos in. Ill see if I have the funds. We still have about 2 more months of cold weather so I may be able to swing it with income tax. Thanks
 

·
Registered
Joined
·
507 Posts
My housings are Eagle Eye housings. They are supposed to be an OEM replacement. Some say they are not as good as OEM housings but the ones I have do a pretty good job next to OEM housings. Side by side you couldn't tell the difference. The price was also better on the wallet, I think I paid $160 shipped for both housings.
 

·
Registered
Joined
·
25 Posts
Discussion Starter #10
Thanks sconnell. I looked them up and couldnt find any without the halos and the cheapest I found were around 300.
Thanks
 

·
Registered
Joined
·
507 Posts
Let me see if I can find a link to them on ebay.
 

·
Registered
Joined
·
507 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #13
Thank u sir. I was just gettin ready to email u and tell u I found some. But these r a little cheaper. Did u use the d1 or d2 set. I read alot of guys r useing the d2. Thanks again for all the help. I got alot of overtime with all the snow we got so ill be able to get them while I have the nose off. Boom
 

·
Registered
Joined
·
507 Posts
I used a d2s setup as I use DDM Tuning HID's. You will have to seal up the bottom of the housings were the OEM ballast goes. I know some people didn't like these housings because the quality wasn't the same as OEM but like I said mine were compared to another charger with OEM and you couldn't tell the difference.
 

·
Registered
Joined
·
25 Posts
Discussion Starter #15
Thanks alot sconnell. Hopefully I can order them in the next few weeks. Might have some more questions when I get them. Thanks again
 
1 - 15 of 15 Posts
Top