Charger Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
129 Posts
Discussion Starter · #1 ·
I just installed my Mopar CAI, and had a slight issue with the Valve Cover Breather Hose being larger in diameter than the 1/2" host that connects to the CAI.. I ended up slipping the 1/2" hose into the stock breather hose and sealed with Silicone.

Anyone else have same prob? BTW, 2007 Daytona
 

·
Registered
Joined
·
253 Posts
I just installed my Mopar CAI, and had a slight issue with the Valve Cover Breather Hose being larger in diameter than the 1/2" host that connects to the CAI.. I ended up slipping the 1/2" hose into the stock breather hose and sealed with Silicone.

Anyone else have same prob? BTW, 2007 Daytona
did you use silicone I or II?
 

·
Registered
Joined
·
3,168 Posts
with the afe cai( i just installed it yesterday) the hose is bigger as well, but they supplied hose clamps. so i just tightened the ***** down :)
 

·
Registered
Joined
·
928 Posts
I know that on mine, the side attached to the motor was much larger than the one attached to the tube. this was on the stock box.

I put a mopar 6.1L CAI in my 5.7 so i just went and spent a buck for a new hose, 1/2 in fit both sides perfectly...... but other work was required to make everything else fit.
 

·
Registered
Joined
·
3,168 Posts
im still gonna say hose clamps for the win. :D
 
1 - 10 of 10 Posts
Top