Charger Forums banner
1 - 1 of 11 Posts

· Registered
2011 Charger Pursuit
2,386 Posts
So odd way of doing it but works for me.

I fill my coolant system up via top hose into the radiator until coolant comes out T-stat. I then connect the hose.

I then fill the coolant reservoir 1/2-3/4 way. I attach a hand vac pump to the over flow tube. I put my hand on the top where cap goes and pull a vacuum with the pump until I see top hose start to bend in. You can hear bubbles coming into the reservoir a lot. I release pressure, add coolant. Repeat until I get no more bubble when pulling a vac.

No bleeders, no real mess. Worked flawlessly on my Charger twice and my other absolute PITA to bleed dodge (eagle vision but its a dodge)
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.