[hskr]

How did you mask the stripes? Did you spray one heavy coat and peel the tape before it dried, or several lighter coats with removing the tape between coats? I've tried leaving the tape down until it dries and it just peals the plastidip up with the tape cause it's "connected" to the overspray on the tape.

 

[hskr]

I've tried that on my wheels(cutting with a razor blade) and it never works out that good and usually ends up leaving a sharp edge that peels up easy

 

[hskr]

Plus I would be afraid I would go too deep and scratch the paint.

 

[hskr]

I did light coats, but the trick is you tape over the same line 3 or 4 times basically layering the tape from the inside to out and then pull the innermost layer off right after you do that coat and the line will gradually get bigger. Kind of hard to explain easier to show..

Actually, that explained it pretty well and wasn't something I would have thought of. Thanks.