New member 2011 RT R&T STP
1 - 6 of 6 Posts
Joined
·
1,950 Posts
Welcome! Are those OEM 20x9 SRT wheels? I had those on my 2006 R/T and needed to run a 5mm spacer up front to avoid rubbing near full lock in reverse (like in a parking lot...)
Have always loved the R/T R&T models that what my 2006 was and essentially all 2019+ R/Ts are so my new one is kinda too heh!
Have always loved the R/T R&T models that what my 2006 was and essentially all 2019+ R/Ts are so my new one is kinda too heh!
Joined
·
3 Posts
Thanks! Yes they are, Alcoa forged with spacers up front. It had these on when I bought it and I thought spacers were needed only because it has 275 tires up front.
Joined
·
1,950 Posts
It would slightly rub even with 245s on there, I used to run a 3mm with those and when I put 255s on I switched to a 5mm.
The SRT cars have a different front spindle so the 20x9 and 25.5mm offset works on them but not on regular spindles.
The SRT cars have a different front spindle so the 20x9 and 25.5mm offset works on them but not on regular spindles.
Joined
·
3 Posts
Ah, that’s why my front spindles have shiny spots at the top. These tires have lots of tread but also cracks and dated 2004 😁 So with the new tires I decided to get wider rims with proper offset from one of the hellcat rims reproduction brands
Joined
·
13 Posts
Sitting pretty! Welcome
1 - 6 of 6 Posts
