Hey all I don't know if a post was ever made for one of these on here before as there just really isn't any information on it that I can find on the internet to begin with. Has anyone ever ran into any problems with one of these? I can see its mainly used to help with noise suppression from the ignition system to help stop any radio interference from what I've read so far. Since I purchased my 2006 Dodge Charger R/T 5.7L V8 back in October I noticed I only have one of these and one of the wires were broken that leads to it and since I currently have a P0300 problem I fixed it and tested it which it seems to be good and ruled out it wasn't the cause of my problem lol. But was just curious if anyone just tossed them from their charger or if anyone had any problems with one going bad? Curious to know what would happen if one went bad and if its truly needed or not since there's a lot of back and forth on different forums to just toss it or replace it. Also was curious if a charger normally comes with 2 of these or just 1.
Here's the one that is currently on my charger that 2 wires from the ignition wire harness go to:
![Image]()
Here's the one that is currently on my charger that 2 wires from the ignition wire harness go to:
