http://www.hennesseyperformance.com...oThis=Dodge+Charger+SRT8+HEMI&ActionReq=Where
Hadn't seen anyone post anything about some of the packages they are offering. If I recall correctly they didn't have the best reputation for some reason but I can't recall when/where I heard this or why.
Anyway... just sounded like a good subject anyway
Charger SRT500
Hennessey Performance Engineering will only be building a total of 100 SRT500's for the 2006 model year. Each SRT500 will receive its own production serial number.
Power:
505 hp @ 6,000 rpm (435 rear wheel hp)
490 lb-ft @ 4,600 rpm (420 rear wheel torque)
Estimated Performance:
0-60 mph: 4.6 sec.
Top Speed: 177 mph
SRT500 Package Includes:
Polished Cold Air Induction System
Dual Stainless Steel Exhaust Upgrade
Upgraded Pushrods
Ported / Polished Cylinder Heads with upgraded valves, valve springs, valve guides, retainers and race valve-job
Ported Exhaust Manifolds
All necessary gaskets & fluids
Professional installation
Chassis dyno & Road testing (up to 100 miles)
Limited 2 year / 24,000 mile warranty
SRT500 Exterior Badges
SRT500 Premium Floor Mats
SRT500 Valve Covers
Limited Edition Interior Dash Plaque with Serial Number
Limited Edition Engine Plaque with Serial Number and Power Ratings
$9,500 wow......
Charger SRT550
SRT550 - 550 HP 392 CID HEMI Stroker Motor
Hennessey Performance Engineering (HPE) will only be building 50 SRT550's for the 2006 year. Each SRT550 will receive its own production serial number.
Power:
550 hp @ 6,000 rpm
550 lb-ft @ 4,200 rpm
Estimated Performance:
0-60 mph: 4.2 sec.
Top Speed: 186 mph
SRT550 Package Includes:
Polished Cold Air Induction System
Dual Stainless Steel Exhaust Upgrade
Camshaft Upgrade
Upgraded Pushrods
Ported / Polished Cylinder Heads with upgraded valves, valve springs, valve guides, retainers and race valve-job
JE 11.0:1 Compression Pistons
JE Forged Pro Wrist Pins
Oliver Lightweight Forged Rods
Upgraded Rings
Polydyn Rod Bearings
Machined Factory Stroker Crankshaft
All Necessary Machine Work
Balanced & Blueprinted Assembly
All necessary gaskets & fluids
Professional installation
Chassis dyno & Road testing (up to 100 miles)
Limited 2 year / 24,000 mile warranty
SRT550 / 392 HEMI Exterior Badges
SRT550 Premium Floor Mats
SRT550 Valve Covers
Limited Edition Interior Dash Plaque with Serial Number
Limited Edition Engine Plaque with Serial Number and Power Ratings
$17,500
They have KW suspension and exhaust packages as well but these prices are pretty serious indeed. The Stroker sure sounds like fun but wow... crazy expensive.
Hadn't seen anyone post anything about some of the packages they are offering. If I recall correctly they didn't have the best reputation for some reason but I can't recall when/where I heard this or why.
Anyway... just sounded like a good subject anyway
Charger SRT500
Hennessey Performance Engineering will only be building a total of 100 SRT500's for the 2006 model year. Each SRT500 will receive its own production serial number.
Power:
505 hp @ 6,000 rpm (435 rear wheel hp)
490 lb-ft @ 4,600 rpm (420 rear wheel torque)
Estimated Performance:
0-60 mph: 4.6 sec.
Top Speed: 177 mph
SRT500 Package Includes:
Polished Cold Air Induction System
Dual Stainless Steel Exhaust Upgrade
Upgraded Pushrods
Ported / Polished Cylinder Heads with upgraded valves, valve springs, valve guides, retainers and race valve-job
Ported Exhaust Manifolds
All necessary gaskets & fluids
Professional installation
Chassis dyno & Road testing (up to 100 miles)
Limited 2 year / 24,000 mile warranty
SRT500 Exterior Badges
SRT500 Premium Floor Mats
SRT500 Valve Covers
Limited Edition Interior Dash Plaque with Serial Number
Limited Edition Engine Plaque with Serial Number and Power Ratings
$9,500 wow......
Charger SRT550
SRT550 - 550 HP 392 CID HEMI Stroker Motor
Hennessey Performance Engineering (HPE) will only be building 50 SRT550's for the 2006 year. Each SRT550 will receive its own production serial number.
Power:
550 hp @ 6,000 rpm
550 lb-ft @ 4,200 rpm
Estimated Performance:
0-60 mph: 4.2 sec.
Top Speed: 186 mph
SRT550 Package Includes:
Polished Cold Air Induction System
Dual Stainless Steel Exhaust Upgrade
Camshaft Upgrade
Upgraded Pushrods
Ported / Polished Cylinder Heads with upgraded valves, valve springs, valve guides, retainers and race valve-job
JE 11.0:1 Compression Pistons
JE Forged Pro Wrist Pins
Oliver Lightweight Forged Rods
Upgraded Rings
Polydyn Rod Bearings
Machined Factory Stroker Crankshaft
All Necessary Machine Work
Balanced & Blueprinted Assembly
All necessary gaskets & fluids
Professional installation
Chassis dyno & Road testing (up to 100 miles)
Limited 2 year / 24,000 mile warranty
SRT550 / 392 HEMI Exterior Badges
SRT550 Premium Floor Mats
SRT550 Valve Covers
Limited Edition Interior Dash Plaque with Serial Number
Limited Edition Engine Plaque with Serial Number and Power Ratings
$17,500
They have KW suspension and exhaust packages as well but these prices are pretty serious indeed. The Stroker sure sounds like fun but wow... crazy expensive.
