Charger Forums banner
1 - 11 of 11 Posts

·
Registered
Joined
·
2,847 Posts
Discussion Starter · #1 ·
Hey there

Can someone with drag experience help me analize my time slip, and help me realize what my car is capable of with a decent driver.
My mods are
JBA Headers
JBA cats.Mids
JBA catback
AFE
Superchips 91 perf.
Also runnin SRT8 20's

60' =2.406:(
660'=9.281
1/4 =14.241
MPH=101.09
 

·
Registered
Joined
·
2,847 Posts
Discussion Starter · #3 ·
I heard somewhere that every 1/10th in your 60' equals around 2/10ths in the quarter.
I'm tring to figure if my car is capable of 13.8 with a decent 2.0 60'
 

·
Registered
Joined
·
2,847 Posts
Discussion Starter · #5 ·
Do you get lots of tire spin of the line?


Due to a 40 mph head wind at Infineon the other night i never got to run the 1/4.

Oh yea...lots of spin. I cant get the friggin launch down.
Every time I've been to Infineon(only twice), there was always a gnarly head wind. I'd say it was 15 to 30 the night I ran those numbers..Pretty warm too
 

·
Registered
Joined
·
14,728 Posts
seems to me like you should have a faster time with those mods. I've run 14.1's with just intake and tstat and your mods are well beyond that level. Has cherry or triple told you anything about the d.a. check? Is it elevation, i know some vegas guys say there times suck due to that but i'm assuming ca, is close to sea level.
 

·
Registered
Joined
·
2,176 Posts
seems to me like you should have a faster time with those mods. I've run 14.1's with just intake and tstat and your mods are well beyond that level. Has cherry or triple told you anything about the d.a. check? Is it elevation, i know some vegas guys say there times suck due to that but i'm assuming ca, is close to sea level.

I believe Infineon is about 600 or 700 feet above sea level.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top