[ChargerBuilt5.7Eddie]

Hey can anyone give me some insight I’ve asked and asked and I’ve gotten mixed answers.

I have a 2011 charger RT That I’m building built motor so far but I came into a deal I couldn’t turn down, I had 2015 charger scat pack with The 6 piston set up with 4 Piston tears,

I was told I had to get spindles from same year hellcat then told it can be any year SRT,

I called the wreck yard and found some spindles for 800 all in from a 2015 hellcat but they telling me at the yard that I need the production year cause they vary? Is this true?
Has anyone done hellcat or scat pack swaps on RT’s and if so what will I need

 

[HemiLonestar]

The front spindles only vary in the type of front hub bearing used. Older RWD spindles had a stem with a large single retaining nut. Later ones use a bolt in hub. Either will allow mounting the 6 pistons on. Your 11 will have the stem style, the cat will have the bolt in style.

 

[ChargerBuilt5.7Eddie]

So technically I can grab the front and rear spindles from the wreck yard and be ok and should make for a not overly complicated swap?

thanks in advance

 

[krautmaster]

I believe you have to get the "knuckles" for the rear suspension to make the Brembo's fit...I don't know if any of the links are different too...

2011-2022 Mopar Rear Knuckle, Left 68089313AD | Mopar Online Parts

2011-2022 Mopar part # 68089313AD - Rear Knuckle, Left

parts.moparonlineparts.com