Charger Forums banner

Dodge Charger Fog Light LED Bulbs! USA Made SLF! Match OEM HIDs! Plug & Play!

43811 Views 102 Replies 14 Participants Last post by  Diode Dynamics
3


Dodge Charger Fog Light LED Bulbs



Diode Dynamics carries LED bulbs for replacement of your Dodge Charger's fog lights, in all major sizes. They are available in HP, XP, and SLF styles. This will make your Charger's fog lights a nice bright white that closely matches factory-equipped HIDs! Just simple plug and play, replace the bulb and you are good to go!

Diode Dynamics offers the brightest, highest-quality bulbs on the market. Your order will ship same day, and we're here if you need us for support and service. These LED bulbs are designed by our engineering team here in St. Louis, and every bulb carries with it a three-year limited warranty.

Brightness:

Diode Dynamics offers several bulb model options so you can choose what fits you best. These options are listed by the design and the lumen output of each bulb, compared to the factory bulb.

HP48: 265 lumens. Lower brightness than factory, but still provides the crisp white, modern color of LEDs.

XP80: 510 lumens. Similar brightness to factory.

SLF: Street Legal Output. Much brighter than factory. These are bright! USA Made!


Bulb Design

HP48: This bulb is designed with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.

XP80: Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more, under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.


These bulbs are made up of a quality plastic connector to slide right into the plug, as well as high durability terminals. A load resistor is embedded to prevent blowing the LEDs from voltage surge, and a diode is implanted to protect the LEDs from reverse polarity. The LED is wired for 12V operation, the kind found on all modern vehicles.


Included in your order is TWO BULBS (to fit your Dodge Charger).


Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited warranty.


Click below for more info or to order:


Diode Dynamics: Fog Light LEDs for 2006-2009 Dodge Charger

Diode Dynamics: Fog Light LEDs for 2010-2014 Dodge Charger







Click below for more info or to order:



Diode Dynamics: Fog Light LEDs for 2006-2009 Dodge Charger

Diode Dynamics: Fog Light LEDs for 2010-2014 Dodge Charger


If you have any questions, please don't hesitate to post, PM, email [email protected] or call: (314) 205-3033

*PM us for the free-shipping code* (U.S. forum members only)

Thanks for looking!
Nick C.


Customer Submitted Photos:


See less See more
21 - 40 of 103 Posts
What LEDs do I need for fogs to match factory HID low beams?
What LEDs do I need for fogs to match factory HID low beams?
The factory low-beams are 4300K, but I personally recommend 5000K

4300K has a hint of yellow to it vs. 5000K which is pure white with no color

5000K also matches the factory LED halos on the 2015 Challengers

Nick C.
Yellow XML2s!!!!!!!! Hell yeah
Will order Friday when I'm not so very poor.
BTW I just installed my third shipment from you guys, everything perfect as normal.
Thanks Nick
  • Like
Reactions: 1
Yellow XML2s!!!!!!!! Hell yeah
Will order Friday when I'm not so very poor.
BTW I just installed my third shipment from you guys, everything perfect as normal.
Thanks Nick
Thanks for your continued support Drew! You'll love the Yellow XML2's, they have such a nice looking 3000K color temperature

Nick C.
Yellow XML2s ordered. Hope they are here by Friday!!
Yellow XML2s ordered. Hope they are here by Friday!!
It's very possible! Our shipping team is very quick

Thanks for ordering with us!

Nick C.
How hard are these to get into the charger? I have heard that you have to drop the bumper to do it?

On my subaru and acura CL I did these myself and it was a piece of cake but I don't know if I want to drop the pumper for a bulb, however the added light of the XML down there would be awesome
How hard are these to get into the charger? I have heard that you have to drop the bumper to do it?

On my subaru and acura CL I did these myself and it was a piece of cake but I don't know if I want to drop the pumper for a bulb, however the added light of the XML down there would be awesome
I don't believe it's 100% required to take the bumper off, but it would certainly make it easier

It's definitely a worthwhile upgrade for the XML2's!

Nick C.
It's very possible! Our shipping team is very quick



Thanks for ordering with us!



Nick C.

On my porch in 36 hours!
You rock Nick
Will post picks assuming my family allows me the time to install tonight
  • Like
Reactions: 1
I don't believe it's 100% required to take the bumper off, but it would certainly make it easier



It's definitely a worthwhile upgrade for the XML2's!



Nick C.

It's easier to go through the fender well. Just a couple plastic clips. Fleebnork did a great write up on this.
We made an installation video demonstrating the process on 2015+ Challengers. It should be a similar procedure for previous model years

Nick C.
Any plan to make xml2 driving lights for the high beams? (for those of us that never use high beams) to match the fogs?
Thanks Nick

I'm installing the fogs sat. Super excited!
  • Like
Reactions: 1
Any plan to make xml2 driving lights for the high beams? (for those of us that never use high beams) to match the fogs?
Thanks Nick

I'm installing the fogs sat. Super excited!
Though they aren't specifically listed for high-beams, we do offer XML2s in most major highbeam sizes

Feel free to give us a call if you have any questions: (314) 205-3033

Thank you for your support!

Nick C.
B Land vehicle Car Motor vehicle Vehicle Automotive exterior
bright out. Only drivers side installed for comparison.
See less See more
  • Like
Reactions: 1
Thank you for posting pictures! I'm glad to hear you like them

Nick C.
I see XML2S in my future, seen your booth at Sema

sent from death star
  • Like
Reactions: 1
I see XML2S in my future, seen your booth at Sema

sent from death star
Thank you for visiting our booth!

Let us know if you need the free-shipping code for a set of XML2s

We appreciate your support!

Nick C.
  • Like
Reactions: 1
Pm sent, thanks again

sent from death star
  • Like
Reactions: 1
Do you install HID conversion kits?
21 - 40 of 103 Posts
Top