Charger Forums banner

Charger Footwell LED Kit! RGBW Multicolor & Single color options! Everything included!

36087 Views 92 Replies 7 Participants Last post by  Diode Dynamics
Charger Footwell LED Kit! RGBW Multicolor & Single color options! Everything included!


Looking to add a little color to your Charger's interior? Diode Dynamics' RGBW Multicolor Footwell LED kits are the way to do it! By adding Diode Dynamics' LED strips under your dash, you can add RGBW color-changing ability to your Dodge Charger's footwell area.

This kit is not just RGB, it is RGBW! That means there is an extra integrated LED chip that is specifically white in color, right next to the standard red, green, and blue LEDs. By using an RGBW controller, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals.

Our Bluetooth Controller will allow you to choose any color under the sun, including True White, directly from your phone! Our mobile app includes a wide variety of features including strobe and fade effects, preset colors, Camera Match, Music Sync, and much more. Our controller will also allow you to adjust the brightness of the LED strips. Any time you power up your strips, they will default to the last color that was previously selected.

These LED strips in this kit are highly flexible and waterproof. They feature high-density LED chips for brighter output and barrel-style M8 connectors for a secure connection.

Included in the 2-Piece Kit:

  • Two (2) 50cm RGBW SMD30 Strips
  • One (1) wiring harness (4-foot)
  • Two (2) quick splices
  • One (1) red LED toggle switch
  • One (1) DC-to-DT adapter
  • Four (4) zip-ties
  • One (1) 3M outdoor adhesive pad
Included in the 4-Piece Kit:

  • Four (4) 50cm RGBW SMD30 Strips
  • One (1) wiring harness (4-foot)
  • Two (2) quick splices
  • One (1) red LED toggle switch
  • One (1) DC-to-DT adapter
  • Eight (8) zip-ties
  • Two (2) 3M outdoor adhesive pads
  • Two (2) RGBW M8 extension wires



The 2-piece kit includes everything you need to install LED strips in the front footwell area on both the driver and passenger side of your vehicle. The 4-piece kit includes everything you need to install LED strips in the front and rear footwell areas on both the driver and passenger side of your vehicle. This kit is very universal in nature and can be tapped into any 12V power source that you would like when installing.

Any questions email us at [email protected] or call: (314) 205-3033

PM us for the free-shipping code (U.S. forum members only)

Thanks!

Collin O.
See less See more
1 - 20 of 93 Posts
^^Nevermind brother. This forum is to share info for all, not by just PM as you guys do.
I ask members to send us a PM or email us because we can't always respond to posts in our threads (We are on 127 forums)

To answer your question, the single color cool white LEDs are a nice, crisp white color. However, I recommend the multicolor kit, because you can change to any color, including white, and also dim the strips, and have cool display modes for shows.

I apologize for not responding sooner, but we aren't in the office on weekends in most cases


Thanks!

Nick C.
Are your LEDs DoT approved for brake light applications?

Would the strips require any heat sinking?

(I'm actually interested in using them to replace signals/brakes/liscence plate lights on my bike).
Well, DOT does not test or approve any lights, so there is actually no such thing as "DOT approved." It is just a question of whether the bulbs are compliant to the appropriate standards published by the SAE, so the correct term is "DOT compliant" Our lighting has not been tested to determine whether or not it is compliant, and we cannot make any guarantees to this nature, though we haven't heard of any issues at all from customers using our bulbs.

Our strips do not require any heatsinking, they will be OK unless you put them right on your motor. We've actually done the same thing with a turn signal replacement: http://www.diodedynamics.com/store/...d-kit/motorcycle-diy-led-turn-signal-kit.html
  • Like
Reactions: 1
Nick, This is Elliott! I would certainly love to order one of these I think. Can you PM me pricing? Thanks!
Please send me a PM at your earliest convenience for the free-shipping code!

Thanks,
Nick C.


Customer Submitted Photo - Challenger Footwell LED Kit

Nick C.
See less See more

How to Set Up and Troubleshoot RGB Controllers | Diode Dynamics
2




RGB Footwell and Grille Lighting Kit shown on our 2016 F-150 SEMA Build
See less See more
(314) 205-3033
(314) 205-3033
Please send us a PM to receive the free-shipping code!

(U.S. addresses only)

Thank you!
Nick C.
2




Diode Dynamics Multi-color Grille LED Kit installed!
See less See more
Having trouble finding a product on the site? Please let us know!

(314) 205-3033 or email: [email protected]

We appreciate your patience with us as we continue updating our brand new website: www.diodedynamics.com


Our biggest sale of the year starts NOW! Enter BLACKFRIDAY at checkout for 20% off EVERYTHING!

Click here to shop: Diode Dynamics New Website

See less See more


Our biggest sale of the year starts NOW! Enter BLACKFRIDAY at checkout for 20% off EVERYTHING!

Click here to shop: Diode Dynamics New Website

See less See more
1 - 20 of 93 Posts
Top