I hope that this won't be the same headache as the 4-6-8 Cad motor that was a royal POS. Especially with Chrysler going back to a 3/36
A question about the new HEMI and MDS
Hey everybody this is my first time posting at these forums, which are quite nice btw.
I've been reading up on the new HEMI quite a bit lately, more specifically MDS, but I haven't found out too much other than that it turns off 4 cylinders when the engine is not under load.
This question is more to satisfy technical curiousities more than anything. But I was wondering if MDS when activated (by that I mean 4 cylinders running, and four off) would cycle through the avaible 8 cylinders. By that I mean does MDS alternate which 4 cylinders recieve power during a stroke of the engine, or does the engine simply turn off the SAME 4 cylinders everytime MDS is activated.
Thanks for any insight
-Manris
I've been reading up on the new HEMI quite a bit lately, more specifically MDS, but I haven't found out too much other than that it turns off 4 cylinders when the engine is not under load.
This question is more to satisfy technical curiousities more than anything. But I was wondering if MDS when activated (by that I mean 4 cylinders running, and four off) would cycle through the avaible 8 cylinders. By that I mean does MDS alternate which 4 cylinders recieve power during a stroke of the engine, or does the engine simply turn off the SAME 4 cylinders everytime MDS is activated.
Thanks for any insight
-Manris
1 - 1 of 10 Posts
1 - 1 of 10 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Charger Forums
ChargerForums to connect with the Dodge Charger community to discuss SRT, Hellcat models, maintenance, mods and more.
Full Forum Listing
Recommended Communities
