[843scat]

Hello, Looking to fabricate a Single turbo kit for my 19' Charger Scat Pack

I'm just starting my research and looking to see if anyone has already done this?

 

[FlyersHockey]

 

[Joebiker]

Hope you plan on beefing up your internals if you go with either option or you will probably go Boom 🤔

 

[RitzRT]

I haven't seen a turbo kit. Unless you're just looking for a way to spend a lot of time on doing something unique, the path forward with a supercharger is already well paved. As JB says, the stock internals aren't going to be able to handle much boost. Conventional wisdom is 6-8psi max with the stock rods/pistons. When I was contemplating forced induction on mine, I was planning to install these first:

6.4L 392 HEMI Forged 2618 Drop In Pistons and Rods Power Package - MMX Modern Muscle Xtreme

Better to get that over with on the front-end rather than waiting for things to break and potentially need a new motor later. Also keep in mind that you'll easily be exceeding the max torque rating for the 8HP70 trans (which is ultimately why I didn't bother).

Best,