Charger Forums banner

2006 Dodge Charger P0302 Code

1K views 4 replies 3 participants last post by  Chaser005 
#1 ·
I own a 2006 Dodge Charger Daytona Edition and I keep getting a Cylinder 2 Misfire code. It only happens every other time I do a cold start on the car. I have replaced the spark plugs, coil pack, and all 8 injectors on the car and I’m still getting the code. Not sure what else could be the issue?
 
#2 ·
If you have the cross-wire cabling the cables connect a coil on one cylinder bank to a spark plug on the opposite cylinder bank (see image below). So check coils and ignition wires for both cylinders 2 & 3. Also check the condition of the spark plug cables/connectors.
299932


SPARK PLUG CABLE RESISTANCE
299933

.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top