Charger Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello guys,
I have a 16 Charger Pursuit 5.7 AWD. I'm trying to take the car to get dyno tuned but the question I have is if I can just remove the front drive shaft because my tuner does not have a AWD Dyno. Or if there is a fuse I can pull.

Thanks you!
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
thanks for the feedback guys!
I saw that tazer gives the option for pursuit AWD vehicle's to lock out the front diff.
I'm just concerned if it fails on the dyno and locks up all four boom haha..
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #7 ·
You'll want to still disable the engagement either by pulling a fuse or using a transformer or tazer to disable the awd from engaging. For safety you could pull the driveshaft from the transfer case to the front diff. Pulling the cv axles would be a bad idea though.
So I should be ok pulling the fuse and removing the front driveshaft just for a safe measure?
i might just grab a tazer and disable/ remove the drive shaft.
one other thing do you know if Alpha obd2 has this feature?
 
1 - 3 of 3 Posts
Top