Charger Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 36 Results
  1. Audio - Alarms - Navigation - Electronics
    Im trying to install a backup camera in my 2014 Charger R/T, my car is pre-wired and I already plugged in the camera I bought, however im looking for a step by step guide on how to enable and get the backup camera working on the display using AlfaOBD, if anyone has experience or knowledge on how...
  2. General Charger Discussion
    Hi everyone. I recently installed the 392 intake manifold onto my 5.7 hemi. The 5.7 throttle body bolted right up, but I am noticing a sound that I didn't notice before when putting the car into "run" mode before starting it. I've made sure that the throttle body isn't hitting anything when it...
  3. General Charger Discussion
    Sup guys! Little history on myself first, so to get to the meat and potatoes (the TLDR point of this thread) just scroll down a bit. I've been a lurker for 3 or 4 months now, finally said screw it and joined up today. I picked up my first Charger (originally a Jeep guy) a couple months ago...
  4. Interior Discussion/Modifications
    Hurst Billet/Plus Pistol-Grip Shift Handle for the 2015-2018 Dodge Charger - Part #5380437 Application: Fits 2015-2018 Dodge Charger/Challenger and 2018 Durango. All models and engines with automatic transmission. Features: Hurst introduces their new Billet/Plus Pistol-Grip Shift handle...
  5. Performance Discussion/Modifications (2011 +)
    If anyone can assist me with the following that would be great. Suggestions, comments, experience, etc all appreciated. Ok so I purchased ARH long tube headers, a CAM, and a harmonic balancer for my 2013 SRT8 Currently on my car I already have an LMI intake and a Corsa Xtreme catback exhaust...
  6. Audio - Alarms - Navigation - Electronics (2011 +)
    Help Please! Can't get the backup camera to work properly My husband installed a back up camera today and can't figure out why when the camera is connected to the reverse lights, the picture on the monitor looks like a VCR that cant track a video, but when he tried connecting it to one of the...
  7. Audio - Alarms - Navigation - Electronics
    Hi all, I'm looking to install an air horn in my charger but I'm confused on how I'm going to wire it. Most have the wire going to the stock horn and having a toggle switch to turn the horn on or off depending on when you want to use it. But what I want to do is wire the air horn separately...
  8. Performance Discussion/Modifications (2011 +)
    Hey does anyone know if there are any cam shafts that are compatible with the 2012 Charger RT. Will an advertised 2010 cam shaft fit in the new 5.7 hemi?
  9. Forced Induction Discussion
    Well guys I took the plunge and ordered my single turbo kit!! if anybody has any tips or advice on the install Id appreciate it! im waiting for the Kit to come in now!! whoo pumped up!! ill be doing the install myself but hopefully I can get a friend to help out so I can get some pix of the install!
  10. Mid-Atlantic Area
    Good morning guys. Does anyone know of any places in Maryland where I can get the headers and exhuast I bought installed, and have my car Dyno'd and tuned? I know theres the Maryland Speed shop, however after contacting them, they said they only install parts they sell due to "liability"...
  11. Performance Discussion/Modifications
    Hey gang! After 4 years, and 60,000km, I finally bit the bullet and ordered a Borla 140125 cat-back from a local shop here in Calgary. At this point, I'll give a shout out to fellow member Flex. His posts and YouTube video (Hemigasm) on his former '07 RT R&T basically made up my mind for me...
  12. Exterior Discussion/Modifications
    2010 Dodge Charger with a Spyder LED Projector Halo headlights and a K2 Black Honeycomb grill upgrade. Installation: I am by no means a mechanic, but I have patience and good mechanical skills. In order to perform the upgrade, you have to take the front fascia off. It sounds scarier than it...
  13. General Charger Discussion
    Does anybody know if the exhaust has to be cut to install Blasting Bobs kit to a Charger 3.5 v6? I hate to rely on a shop or anybody to do work to my car so it may be a deciding factor on what brand exhaust I go with.
  14. Audio - Alarms - Navigation - Electronics
    So I have a kenwood stereo model number # KDC-X995 and I'm wondering what parts/harness I will need to install this into my charger eg- single din or double. Also I need the USB mic that goes with it since it was left in my old car when I removed the stereo and can't seem to find it anywhere...
  15. V6 Specific Discussion
    I currently have the R/T exhaust on my car and after reading many threads about exhaust I found that I really should have just gone with the aftermarket dual in the first place. Though I'm still considering just replacing the mufflers and resonators with aftermarket pieces, I don't feel like...
  16. Audio - Alarms - Navigation - Electronics
    Just got the MyGig Lockpick C8 for my 2011 Mopar Charger. Their web site has a great install video but makes it look a bit easier than it is, especially if you have the Mopar 11 with the Pistol-Grip shifter. This thing is WELDED to the stem and cannot be removed - therefore the shifter plate...
  17. Exterior Discussion/Modifications
    I have pretty much decided on flashtech for my halos, but Idk what all extra I need to buy besides the halo kit. I also would like to run my halos to a switch in the cab and also to a remote. Any help is appreciated. Thanks in advance!
  18. Exterior Discussion/Modifications
    I just got a fiberglass SRT8 hood, I had a couple of questions. I have to drill the wholes for the windshield washer fluid hose, what size bit do I need to use? and the other question is, the hood doesn't have holes for the clips to hold on the heat guard, how important is the heat guard? Will...
  19. Charger Problems/Assistance
    Hello all, I am trying to wire up my Mopar fogs and when following the install on the the "How Do I everything..." there was mention of the 2008's and up being wired differently, or pre-wired for fogs. I have found one prewire for the left fog, but no wire for the right fog, can anyone...
  20. Wheels/Tires/Brakes/Suspension
    Just picked up an SLP Line Lock kit from Speedlogix in Florida and installed it. It is pretty simple but I thought I would do a short write up on the install. SLP is really good at putting the kit together. Writing instructions... well, let's just say it's not what they are the best at... :) I...
1-20 of 36 Results
Top