Charger Forums banner



    PK Auto Design
    Good morning and ladies and gents. It's that time of the year where the savings are being passed out like Uncle bobs famous Ham at the dinner table. Well we got the hottest deals possible. Not only are we going to save you the most, were going to toss in some more for you guys ! Contact us...
  2. the dreaded hemi tick

    Performance Discussion/Modifications
    so i have a 2016 dodge charger hemi rt and was just installed jba long tube headers on my car. almost immediately after i installed the headers i heard the hemi tick. I am still unsure if i have the hemi tick or not because i installed the headers my self. the car has 52.5k miles and was a...
  3. #1 Source for Exhausts & Headers Corsa Borla ARH SW Meisterschaft & More

    PK Auto Design
    Good morning ladies and gents, We here at PK Auto Design always strive to provide our car communities the best products, service and knowledge available. Not only do we offer the ability to provide the best brands in the market, but also the ability to provide some of the most competitive...
  4. Headers for my '13 Charger R/T

    Performance Discussion/Modifications (2011 +)
    I wanted some input on a good brand of headers, short or long tube, and anything additional that I would need to do or buy for them to work efficiently i.e. exhaust system, tune, etc. Some other good mod recommendations would be appreciated as well.
  5. Long Tube Header Install Photos

    Performance Discussion/Modifications (2011 +)
    Does anyone have any pictures of Long Tubes installed on a 5.7L Charger between 12 and 14? Did anyone have any clearance issues with them?
  6. Long Tube Headers, cam swap, and pulley Install assistance needed

    Performance Discussion/Modifications (2011 +)
    If anyone can assist me with the following that would be great. Suggestions, comments, experience, etc all appreciated. Ok so I purchased ARH long tube headers, a CAM, and a harmonic balancer for my 2013 SRT8 Currently on my car I already have an LMI intake and a Corsa Xtreme catback exhaust...
  7. VIDEO: SLP Long tube Headers/ HF Cats / Loudmouth I Cat-Back

    Picture/Media Post
    My most recent addition- Long tubes and high flow cats. Sounds insane.
  8. More Power

    Performance Discussion/Modifications (2011 +)
    Hey guys I have a 2011 RT and I'm looking at a few different mods to get going. I already have a volant CAI, slp lm2 cat back exhaust, and a diablosport trinity tuner. I'm really just looking into what mods to do first and what people have seen with doing these mods themselves. Also the car is...
  9. Third Dodge Charger, BLANK SLATE!!!

    Performance Discussion/Modifications
    So what's up everyone. I have been a charger owner for a long time. I started with a 2007 RT, swapped the intake out with a K&N and did a mid muffler delete back when I was keeping things extremely simple. Loved the car. Then sold and bought the M11 charger. Added qtp cutouts for noise...
  10. ****help with headers/midpipes/exhaust****

    Charger SRT-8 Discussion
    Hello all. I have a 2006 Charger SRT 8 and I am shopping for headers for it, but I cannot find any headers with mid pipes that's all 3". all the outlets on the headers are 3" but the mid pipes available shrink to 2.5" does anybody have this application? is there a big difference? please help me...
  11. Highflow Cats

    Performance Discussion/Modifications (2011 +)
    Hi I am hoping someone can answer this for me. I want to buy Flowmaster cats, but they are only listed up through 2009 Chargers. Is there any change after 2009? I am 99.99% sure the 2011 has the same cats, but I can't seem to find out for sure. I looked up Kook Cats and its the same part numbers...
  12. new catback or headers?

    Performance Discussion/Modifications (2011 +)
    I have 2012 Charger rt 5.7. k&n CAI and throttle body spacer, and Magnaflow mufflers. I want a little bit more exhaust sound though. I'm thinking about getting longtube headers and possibly a whole catback exhaust system. But which should I get? Or would it be okay to run headers with just the...
  13. To Header or Not to Header that is the question...

    Performance Discussion/Modifications
    Whether tis nobler in the mind... Sorry, got stuck on Ol' Bill Shakespeare for a second. I've got a 2007 SRT Charger. I've got the Diablo Tuner. It has a CAI, and now I'm looking for a way to improve performance that isn't a supercharger (that comes later). Reading some of the past posts, it...
  14. Looking for suggestions for Full Long Tube Headers

    Performance Discussion/Modifications
    I have a 2008 R/T and I'm looking to upgrade the front half of the exhaust system. I want to slap on full tube headers that lead into cutouts. However I still need to pass the NC inspections (I don't have a guy for that) I want full tube, three inch collectors, ceramic coating (from what I...
  15. RT stock items FS

    Parts For Sale/Wanted
    I have headers and midpipes from my RT for sale. They were fine and i had them replaced with new headers and mids. Pm if interested I have a bunch if other items as well, but im contemplating on whether or not to sell em. They are the RT heads RT cam and RT stock torque converter.
  16. About 2 weeks and these parts will be for sale

    Parts For Sale/Wanted
    In 2 weeks I will be having Inertia big valve heads, Spartan Plus Cam, SRT8 headers and midpipes w/ cats and an edge 3500 stall converter installed on my 2006 charger rt...This means I will have the stock heads cam headers midpipes w/ cats and torque converter for sale, and want to know if...
  17. Looking for ealry SRT8 Headers and Midpipes

    General Charger Discussion
    Anyone here from SoCal with srt8 headers and midpipes with the bolts for sale? I have a set price of 1770 for my next upgrades and a good price for the headers and midpipes, but because im in california the shipping to me is insane. If anyone knows someone or themselves has these parts let me...
  18. Couple Mod Question

    Performance Discussion/Modifications
    All right, my setup so far is flowmaster duel cat back, K&N intake and 91oct diablo tune ... With that being said... I have been looking for some good headers, with an equally good price, which has been hard to find. I found the MotoBlue Long tube headers, but have read some back and forth...
  19. Warped Headers?? maybe?

    Charger Problems/Assistance
    Hey guys, and gals. anybody every had problems with Warped header flanges?? im about to have to replace my THIRD set of header gaskets and im pretty tired of it. the first to gaskets where cheap ones that came with the Longtubes I bought from Pacesetter, after those I bought a set of high...
  20. Header help

    General Charger Discussion
    I have a 09 charger 2.7 with a set of flow masters it gives it some nice little sound and I want to put some headers on to give it a deeper louder sound. With a 2.7 will it be worth it. I'm not interested in hp I just want it to sound good! Thanks