Charger Forums banner


  1. Recommended Book for Rebuilding

    Performance Discussion/Modifications
    Hi guys, I'm getting ready to take apart a 2016 5.7 to do a cam job on it (heads have to come off) and I was wondering if anyone recommends any books for torque specs and what not. I am open to both physical and digital books. Thank you
  2. Built 5.7?

    Performance Discussion/Modifications (2011 +)
    Hey fellas, I have a 2012 Charger R/T, and I was wondering if it would be worth building the engine (cam, stroker kit, etc) or swapping it for a 6.4? I have done all the research and have it priced it all out for the 392 engine, but I wondered how much it really costs to get 392 type power out...
  3. SOLD: F/S: Texas Speed Stage 2 Cam Kit

    Parts For Sale/Wanted
    I have a Texas Speed Stage 2 Cam kit for sale. I had to purchase each piece separately but these are the top of the line products, I ordered them directly from the manufacturer. Each part is completely brand new only opened the boxes to verify that the parts were accounted for, here's the list...
  4. Long Tube Headers, cam swap, and pulley Install assistance needed

    Performance Discussion/Modifications (2011 +)
    If anyone can assist me with the following that would be great. Suggestions, comments, experience, etc all appreciated. Ok so I purchased ARH long tube headers, a CAM, and a harmonic balancer for my 2013 SRT8 Currently on my car I already have an LMI intake and a Corsa Xtreme catback exhaust...
  5. More Power

    Performance Discussion/Modifications (2011 +)
    Hey guys I have a 2011 RT and I'm looking at a few different mods to get going. I already have a volant CAI, slp lm2 cat back exhaust, and a diablosport trinity tuner. I'm really just looking into what mods to do first and what people have seen with doing these mods themselves. Also the car is...
  6. Uber Hemi Tick

    Charger Problems/Assistance (2011 +)
    This is what happens when the "Hemi Tick" is mis-diagnosed! The cam bearings were also badly scored and I found metal filings on the oil pickup tube screen. I also found 3 other lifters that were going bad. The roller bearings had collapsed.
  7. BEFORE&AFTER Video Links "Stock to Not"

    Performance Discussion/Modifications
    If anyone is interested in seeing what modifications can do to your Charger, take a look at these videos. It is a quick 16 minutes of your life. Comments and Criticism are welcome :beerchug: Vid One: 2006 Dodge Charger RT Drag Racing Vid Two: 2006 Dodge Charger RT Drag Racing #2
  8. So i raced for the first time with new mods

    Performance Discussion/Modifications
    Last friday march 21 2014 i went down to RaceLegal at Qualcomm Stadium for the 1/8th mile Drag races, and I was very pleased with the results of my new modifications. Now i did have 3/4 tank of gas when i got there and i did make many hot laps (not reccomended i know) and the track was...
  9. RT stock items FS

    Parts For Sale/Wanted
    I have headers and midpipes from my RT for sale. They were fine and i had them replaced with new headers and mids. Pm if interested I have a bunch if other items as well, but im contemplating on whether or not to sell em. They are the RT heads RT cam and RT stock torque converter.
  10. About 2 weeks and these parts will be for sale

    Parts For Sale/Wanted
    In 2 weeks I will be having Inertia big valve heads, Spartan Plus Cam, SRT8 headers and midpipes w/ cats and an edge 3500 stall converter installed on my 2006 charger rt...This means I will have the stock heads cam headers midpipes w/ cats and torque converter for sale, and want to know if...
  11. HELP!!! New heads and cam installation questions

    Performance Discussion/Modifications
    Has anyone here ever done the inertia premium big valve heads with a spartan plus cam (or similar mod), and if so has anyone deleted the mds and egr in it? Reason im asking is because im having an issue here due to lack of knowledge. Do i need to buy the non mds lifters as well as the mopar...
  12. T/C or Rearend first?

    Performance Discussion/Modifications
    Is it better to install a 3500 edge converter (~$500)or LSD diff with modded rearend(~$1000)? Mods thus far: 2006 RT SRT8 headers and midpipes 5.7 magnaflow catback Spartan plus cam 180 thermostat 22" wheels (obviously a mistake, but i deal with em) Drilled&slotted rotors -whats better to do? I...
  13. Where to buy 392 cam???

    Performance Discussion/Modifications
    I have a local friend who has done many cam swaps on chargers and Camaros. He said if I can find a 392 cam we'd install it for my Christmas gift! I'll be installing it in my Mopar 11. Any clue on where to even find one???
  14. Need Cam Advice and Installer in MPLS, MN

    Performance Discussion/Modifications
    I have read info on many cams and it seems like you need to decide on low or high end power? If I had to decide I guess I would pick low end sense that is the most fun range (and I think I lost some with straight pipes). I am no cam expert, but I just want the best overall power and the most...
  15. 268 cam question!

    Performance Discussion/Modifications
    i am wanting to buy a 268 cam and a diablo tuner from ... basically what else will i need, lifters, springs? sorry about my camshaft unawareness ;)
  16. Cam install help

    Performance Discussion/Modifications
    Hey guys I just got my cam the otherday and I have most of the stuff I need to put it in but I was looking at how to post on here and had a ? on there it says they use screw starters but I can use a pick up tool. What I need to...
  17. 412RWHP Dodge charger R/T for sale 38,000 miles 20,000$ OBO

    Cars For Sale/Wanted
    412RWHP 457 ft lbs Dodge charger R/T for sale 38,000 miles Due to my situation I need to sell my charger ASAP. It's a 2006 dodge charger R/T silver with black hemi decal on the hood and cursive charger lettering on the side. The trunk is blacked out and it has black taillight covers, dub air...
  18. Now thats a Hemi!

    Performance Discussion/Modifications
    OK, so I know I need to learn a bit more about headers, cams, etc. I have the basics down. I have started at the tails and am working my way to the front. I now am at the stage of doing some headers. If I ever want this sounds I better be looking at some realy large cams right? I have heard...