Charger Forums banner
1-20 of 51 Results
  1. General Charger Discussion
    I have a 5.7 wit 1 7/8 longtubes Stage 2 cam with non mds 3inch straight piping from headers back All in the corner of my room. Will a 6.4 manifold ported at the throttle body to 87mm and intake heads for more flow give me more hp or low-mid rang power??
  2. Performance Discussion/Modifications
    I bought a 2018 Charger R/T that was built by a performance shop that seems to be putting out some highly reliable and great results, but i want to finish the build and not waste money on parts that won't help. -I have the Eibach Sport Springs, Pro Alignment Bushings, Pro Alignment Front Arms...
  3. General Charger Discussion
    Super anxious about getting new rims and how they will fit, also worried about tire size effecting performance on my 5.7 charger daytona. 275/40R20 front and back or that front^ and 305 back if that works right without throwing off anything.
  4. New Member Introductions
    Hello, my name I Raymond. I just got a 2018 Charger RT. I need some advice on best first mods to do plus PCM advice for tuning
  5. Charger Problems/Assistance (2011 +)
    Me and my dad recently bought a 2013 dodge charger rt thats needs a knew engine,we have a 5.7 engine from a 2006 rt newly rebuit my dad owns his own car shop im just wondering would it work its ok if it doesn’t a local is selling engine and trans out of a 14 5.7...just seen if i could save a...
  6. General Charger Discussion
    i have a 2011 dodge charger pursuit i bought the keyfob with remote start got it programmed and enabled remote start with alpha obd and when i press the remote start button it blinks once and shows up hood open remote start cancelled on evic so i went into alpha obd and disabled the hood ajar...
  7. Performance Discussion/Modifications
    Yes, I know, yet another exhaust question :LOL: Over the past couple of months, I have debated between different exhaust systems. Initially I wanted to get a catback so that I could keep the stock system in tact, but the hacking-it-up route seems a lot cheaper with satisfactory results. I...
  8. Charger Problems/Assistance
    To try to make a long story as short as possible... I've had problems with my Charger dying on me while driving. The first time, the car would crank over but would not actually start. Got it sent to the dealership and they "fixed" the fuel pump and added some sort of attachment (?) Not sure...
  9. General Charger Discussion
    Hey, I have a 2014 Dodge Charger 5.7 and was wondering if the exhaust supports are the same as the 2010 model because I was hoping for the outlaw exhaust but they only sell a 06-10 and a 2015-2019 and I was wondering if the 10 could possibly fit the 2014, seems like a goofy question but am...
  10. General Charger Discussion
    I have a 2006 charger rt and I have purchased bbk long tube headers and slp loud mouth cat back exhaust. There not installed I’m waiting on the headers does anyone know if I need catless mid pipes or if there’s a way around it
  11. General Charger Discussion
    So recently I just replaced my lifters to get rid of the hemi tick (it’s still there 😑) but I had to take everything from the manifold to the headers off. Once I replaced everything and put it back on, I turned the car back on and it starts to smoke from the side I replaced. It’s not a lot but...
  12. Charger Problems/Assistance (2011 +)
    Hello, I have no idea if this part has anything to do with the issue BUT I recently visited a dodge dealership for the alternator recall. Before my visit my check engine light wasn’t on at all , just a tire light. I have a picture of the dash before and after that I will put below , but when I...
  13. General Charger Discussion
    Sold off the 2012 3.6L a few months ago and patiently waited for the right R/T to show up. After months of waiting, I found a 2015 R/T Plus in B5 Blue with only 6,500 miles. I knew that this was probably the best one I'd find within my price range, so I got it. Owner said he drove it a lot when...
  14. Performance Discussion/Modifications
    Overheated - typical dropped valve seats design flaw. Looking at California rebuild options (on a budget): Stock rebuild (cylinders bored .020 over for minor cylinder scoring), new/reman heads Performance rebuild options (cam, heads, intake?) Stroker options? Something else I haven't thought of?
  15. Cars For Sale/Wanted
    Hello everyone!! I’m from Virginia near Virginia Beach. I’m looking for a 06-2010 Dodge Charger or even newer but I don’t think my price point would match. It must have steering wheel controls and dual climate accompanied by a 5.7 Hemi (or even a SRT8) My price range is all the way up to 9k in...
  16. Performance Discussion/Modifications
    Need help I want to buy some coilovers but I’m in between some Street edge coilovers, TruHart, or god speed. They’re all about the same price the street edge are $100 cheaper on ebay but I’m looking for my the best quality out of these 3. Btw I have a 2014 RT RWD
  17. General Charger Discussion
    Hi guys I've been a proud papa of a 2013 dodge charger se since her tires left the factory floors. I'm proud to say after 7 beautiful years and 156k miles on her, she has finally taken her last breath. NOW my delema! I am literally in the middle of purchasing a new house so financing a new Mopar...
  18. Performance Discussion/Modifications
    I’m trying to swap to a 3.09 lsd dif, I found a local guy that will sell him for $600 but not sure if it will direct bolt up or if I have to buy other parts? Need help please
  19. Performance Discussion/Modifications
    Currently looking into buying header probably long tubes with high flow cats. What are the best brands of headers to buy and also what are some other best bang for the buck brands. I want a good set of headers but I don’t wants to be putting almost 2k into them
  20. Performance Discussion/Modifications (2011 +)
    Hey fellas, I have a 2012 Charger R/T, and I was wondering if it would be worth building the engine (cam, stroker kit, etc) or swapping it for a 6.4? I have done all the research and have it priced it all out for the 392 engine, but I wondered how much it really costs to get 392 type power out...
1-20 of 51 Results