Charger Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 30 Results
  1. New Member Introductions
    Hello, I'm Jim from Wayland, Michigan. Been a gearhead all my life. Own way to many toys... Loved the Charger styling and reputation since the '60s but that is dating myself. My current personal project. I'm looking for insights and wiring diagrams for 2019 Charger SRT with a 6.4. (It's a...
  2. Performance Discussion/Modifications (2011 +)
    Context: I have a 2011 pursuit 5.7 that I did a 392 swap on. I have a full 2020 scat pack front cradle and suspension. I’m running 4 piston brembos up front. The rear end is still stock police R/t knuckles and brakes. Problem: As of today I replaced all 4 wheel speed sensors with the police...
  3. Performance Discussion/Modifications (2011 +)
    Hey y'all my brother has acquired a complete 6.4 assembly and tasked me with jamming it in his AWD 5.7 pursuit. I have read many posts, but most of which are for RWDs or for older generations. I am curious if anyone can think of a specific problem I may encounter (I am certain there will be at...
  4. Performance Discussion/Modifications
    Looking for info on future HP gains with a twin turbo set up. Will I need to upgrade anything else along with it? I know the turbos will increase heat, should I then tune for E85 to help decrease temps? Also, Anyone ever do a plug and play chip? Worth it? Any set up and advice welcomed...
  5. Charger Problems/Assistance (2011 +)
    h
  6. Performance Discussion/Modifications
    About to pull the trigger on a Carven catback for my Daytona 392. Cant decide if I want the exhaust valves welded back into a brand new shinny stainless exhaust or delete the valves altogether. I like the idea of being a little more quite when in street mode but also like the idea of not cutting...
  7. Performance Discussion/Modifications
    Hello all. I’m looking to make my Scat faster. I’m in a toss up between a forged 392 with some model of pro charger( not set on one yet ) or buying a fairly close to cost Complete Hellcat drop in with trans. What would be the better option ? Looking to shoot for 750/800wheel on a reliable...
  8. Parts For Sale/Wanted
    392 intake manifold along with actuator and 392 map sensor for sale $500 sold!!
  9. Forced Induction Discussion
    Is it worth saving my hemi engine only if my head gasket is blown? I put a new starter on and it was trying to crank but when I seen the white smoke I knew it was that.
  10. Performance Discussion/Modifications
    Just got my car back from the shop and I’m not happy with the dyno numbers , the car made 475/525 on E85 car is completely done up I was expecting upwards of 530 wheel , anyone have any input or suggestions car has pac springs / hellcat lifters which I was told the car would be tuned more...
  11. Performance Discussion/Modifications (2011 +)
    Just got my car back from the shop and I’m not happy with the dyno numbers , the car made 475/525 on E85 car is completely done up I was expecting upwards of 530 wheel , anyone have any input or suggestions car has pac springs / hellcat lifters which I was told the car would be tuned more...
  12. Forced Induction Discussion
    Hello, Looking to fabricate a Single turbo kit for my 19' Charger Scat Pack I'm just starting my research and looking to see if anyone has already done this?
  13. SRT Engineering Q&A Area
    I was wanting to know if a 2021 wide body Hellcat Redeye Hood from Mopar is a direct fit on a 2020 widebody 392. If anybody has done this I would like any feedback. Thanks in advance
  14. General Charger Discussion
    Loud ticking, when I put the gas on it gets faster, but also not as loud. I have a Charger SRT 2016 with 55,000kms on it, no warranty. Took it to dealer they said they checked lifters & said it wasn’t them & that they needed to go into my engine further to diagnose it. Which will cost even more...
  15. New Member Introductions
    Hey all... this is my first foray into owning a Dodge of any kind and I have to say I'm truly impressed so far. I've only had my new ride for 5 days so I'm certainly looking to meet others and get ideas for mods and all that good stuff.
  16. Parts For Sale/Wanted
    Recently cleaned and flow benched all within 1% of each other. New seals with less than 10k on them. But might want to install new ones just to be safe. 180 plus shipping for the set. Individual bagged and sealed
  17. Performance Discussion/Modifications
    I've finally decided to buy a set of Long System Headers w/Cats from ARH, but I am not sure which size would be best for my 392. Its my daily driver along with some racing and cruises, and will not likely track it. I am getting more mods put in along with a tune, but I wont ever be adding forced...
  18. Parts For Sale/Wanted
    2015+ Charger/Challenger Lug nuts. I am open to reasonable offers. 1. Gorilla Lug Nuts. Part # 71643NBC, 20 pc lock set. $40.00 available to ship at buyers expense. Please include 3% PayPal/Venmo fee. Located in Alexandria, VA.
  19. Charger Problems/Assistance
    Hello everyone I started my car today and the uconnect screen didn’t turn on just stays black. I just got this car a couple weeks ago and it’s already having issues so took to the dealership and they told there backed up and won’t be able to check it out for a month. I’ve tried disconnecting the...
1-20 of 30 Results
Top