I wanted to do my first write up on something easy.... so i did the O ring on the push down locks. This was a very easy mod to do anybody can do it if you have the right door locks and tool. I know i am not the one that came up with this mod i am just doing a write up because i never saw one on the forum.....
FOR SALE!!!! PM ME
http://www.chargerforums.com/forums/...71#post1324771
THE ONLY TOOL YOU WILL NEED ARE TWEEZERS
MAKE SURE YOUR LOCKS LOOK LIKE THIS.
WRAP THE O RING AROUND THE TWEEZERS THAN START TO STRETCH THE O RING OUT FOR ABOUT 1 MIN UNTIL IT GETS GOOD AND LOOSE. WRAP THE O RING AROUND THE DOOR LOCK FROM THE BACK OF THE LOCK TO THE FRONT OF THE LOCK.
THIS IS WHAT IT SHOULD LOOK LIKE I WENT WITH ALL 3 O RINGS YOU CAN DO 1 , 2 OR 3
HERE ARE ALL THE COLORS
HERE IS ANOTHER GOOD IDEA FOR THE O RING
BETTER PICTURE
ANOTHER IDEA
AND THE LAST IDEA
TELL ME WHAT YOU GUYS THINK AND GOOD LUCK !
Write Up For O Ring Push Lock Mod [pictures]
Challenger R/T 2010 (3937lbs) 28J, Leather, No Sunroof, SG II, 18's [Delivered: 06Jan10]
[Billet Technology]
The General Sherman / 2006 Charger R/T, Bright Silver
Linear Mode
