The 2013 Danko Charger Unveiled !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Ddaddy]

SHA-ZAM!!!!





This thing is waaaay too cool to be constrained by only 2 dimensions...

[Ddaddy]

Of course, you knew there would be more...

[MoPower]

thanks for the photoshops, very nice!!

[MoPower]

As I mentioned earlier, the most critical issue with this nose is the rotating door clearance so the next step is to take the nose off and start the investigation. The 3D renders are a great help here to precisly position the location of the cardboard swinging door mock up.

[MoPower]

I had to build a mock up of the headlight door to simulate the rotation. There seems to be just enough space to work out as long as I decrease the length of the door from 12" to 11" inorder to clear the inside headlight support brace. Stay tuned for for updates

[Gladiator]

I'm not going to lie. That is some highly interesting cardboard right there because of what it represents.

[MoPower]

Here's another angle

[MoPower]

I put the nose back on and chopped out the parts I didn't like. It's looking just like the render already!! LOL

[MoPower]

Here are some progress pics. The part about the bumper is gonna have to built up about an inch according to my 3d Model.

[Gladiator]

Looking good.