Joined
·
4,631 Posts
I steamed cleaned them (cheap steamer from Amazon for about $30), made sure they were dry, and then painted them. On older cars/trucks I've scuffed them with a wire brush and Scotch Brite, but this one was new enough I didn't have to do all that. Being nearly new there was no oxidation or corrosion, so I just had to make sure there was no dirt, oil, or grease to prevent the paint from sticking.
Pretty easy mod, and probably one of the most noticeable mods you can do for under $50.
Pretty easy mod, and probably one of the most noticeable mods you can do for under $50.