Pedders Coil and how they change the look of the LX

[DMS]

Guys,

Here are some pictures of our Pedders coils installed for you to browse. If you have any questions, just ask

Pedders Drop coils ad 22 inch wheels
http://forums.peddersusa.com/imagehosting/74920e3a813c14.jpg

Pedders Drop coils and 20 inch wheels
http://forums.peddersusa.com/imagehosting/74920e3a993981.jpg

Pedders Drop Coils and 20 inch OEM Magnum
http://forums.peddersusa.com/imagehosting/749335eb457fd4.jpg
Challenger with Drag Coils in the back
http://forums.peddersusa.com/imagehosting/749345d1e91ace.jpg

CHALLENGER RT WITH PEDDERS TOURING PACKAGE
http://forums.peddersusa.com/imagehosting/74a6a4bf25ca32.jpg]

Coils only using OEM dampers
http://forums.peddersusa.com/imagehosting/749340d25bc50f.jpg


Magnum with 18s
http://forums.peddersusa.com/imagehosting/749358bc26ca80.jpg

300 with 22s
http://forums.peddersusa.com/imagehosting/74934e069c56f1.jpg

thanks
Mike
dms

[DMS]

One of the great things about our Pedders coils is that they are more
compatible with OEM coils than most other aftermarket coils. There have
been lots of aftermarket, non Pedders coils, installed on OEM dampers,
which created shock/strut problems. Now it is better, in all conditions,
to install cour Pedders dampers to our Pedders coils. Our Pedders
dampers are made specifically to complement our Pedders coils and do a
great job with them, and your handling will be better with our dampers
and springs, than without our dampers. But t is a personal decision on
what you want to do.

So if you have in mind just updating your coils, have no fear that our
coils will work well with your OEM shocks. We have 2 different coils for
the rear. Ones for Nivomats and ones without. If you need assistance
with the selection, all you have to do is ask. Pedders is ALWAYS here
for this communty

thanks
mike
dms

[bugsy]

Now are these vehicles only running kits such as "LX Kit A"?

Im looking to do a suspension upgrade, and definitely a drop in the very near future, but am just plain getting frustrated deciding how I want to do it though. I cant decide between just getting coils (LX Kit A), or going with the dampers also (I know, I should just do it right the first time).

Will each of these give me a drop around 1.5 front and 1.9 rear?

Also, which front and rear camber kits will I need from you guys also with either of the options I mentioned above? How much am I looking at for springs + camber kits, and springs + dampers + camber kits?

Basically, when i am ready to make the big purchase, I want to be able to have the options, list of supplies, and prices in front of me then decide which route I want to go from there.

Thanks for your help guys, I figured id ask you guys directly and get good answers rather than take other peoples words for it

[DMS]

Now are these vehicles only running kits such as "LX Kit A"?

Im looking to do a suspension upgrade, and definitely a drop in the very near future, but am just plain getting frustrated deciding how I want to do it though. I cant decide between just getting coils (LX Kit A), or going with the dampers also (I know, I should just do it right the first time).

Will each of these give me a drop around 1.5 front and 1.9 rear?

Also, which front and rear camber kits will I need from you guys also with either of the options I mentioned above? How much am I looking at for springs + camber kits, and springs + dampers + camber kits?

Basically, when i am ready to make the big purchase, I want to be able to have the options, list of supplies, and prices in front of me then decide which route I want to go from there.

Thanks for your help guys, I figured id ask you guys directly and get good answers rather than take other peoples words for it

Drops vary, depending on which style LX you have. SRT8 is different than base model. That is why I posted the pictures so all can see.

The above pictures all have coils and dampers at a minimum and some have TrackII. But the heights will be consistant whether you do coils only, or do a touring, or track system

Here is a price for a spring kit only with the bump steer bushing-

Part Number Description Price
2940 LX Front Lowering Coil approximate 50mm drop $89.62
2940 LX Front Lowering Coil approximate 50mm drop $89.62
2941 LX Rear Coil Approximate 25mm drop for use with Nivomat shocks only $89.62
2941 LX Rear Coil Approximate 25mm drop for use with Nivomat shocks only $89.62
EP2113 LX Bump Steer Correction Kit $81.56
LX NIVOMAT Equipped Lowering Kit $440.04
Menu System Discount $70.05

Menu System Discount Adjusted Parts Total $369.99

Here is an alignment bushing kit:

Part Number Description Price
EP2113 LX Bump Steer Correction Kit $81.56
EP6567 LX Front Radius Rod Bush $156.84
EP6570 LX Front Upper Control Arm Bush with Adjustable Camber Capability $273.98
EP7277 LX Rear Upper Control Arm Bushes with Camber Adjustability $165.20
Total Pedders Parts $677.58
Menu System Discount $217.59

Menu System Discount Adjusted Parts Total $459.99

Please note that all of our kits are discounted with respect to individual parts. You can check out our kits on our website to see all that we have to offer. Then when you are ready, I can assist you with any questions that you might have.

Mike
dms

[TopBanana107]

Mike, are any of those cars pictured dropped with the 2940/2941 coils only?

[DMS]

Mike, are any of those cars pictured dropped with the 2940/2941 coils only?

I think the 5th picture is coils only.

mike
dms

[TopBanana107]

I think the 5th picture is coils only.

mike
dms

I got that, I can read!!!:biggrinjester: I was wondering if it was the 2940 with the 2941 coils... I have the Nivomats, and I would like to know how the drop looks.

From your post earlier, the drop would be about 2 inches in front using the 2940s, and 1 inch in the back using the 2941s, right?

If I didn't have the nivomats, how much more of a drop would I have using another rear coil from you guys?

Thanks!

[DMS]

I got that, I can read!!!:biggrinjester: I was wondering if it was the 2940 with the 2941 coils... I have the Nivomats, and I would like to know how the drop looks.

From your post earlier, the drop would be about 2 inches in front using the 2940s, and 1 inch in the back using the 2941s, right?

If I didn't have the nivomats, how much more of a drop would I have using another rear coil from you guys?

Thanks!

Here is some info on drops on a base model charger with 18 inch wheels
Front:
OE at 695mm, 2940 at 642mm, 7940 at 667mm

Rear:
OE at 695mm, 2941 at 630mm, 2941 at 638mm, 7026L at 638mm, 7026R at 650mm

These are approx numbers based averages of hundreds of LXs

mike
dms

[TopBanana107]

Here is some info on drops on a base model charger with 18 inch wheels
Front:
OE at 695mm, 2940 at 642mm, 7940 at 667mm

Rear:
OE at 695mm, 2941 at 630mm, 2941 at 638mm, 7026L at 638mm, 7026R at 650mm

These are approx numbers based averages of hundreds of LXs

mike
dms


Thanks Mike.

[DMS]

Challenger with Drag Coils in the back
http://forums.peddersusa.com/imagehosting/749345d1e91ace.jpg

CHALLENGER RT WITH PEDDERS TOURING PACKAGE
http://forums.peddersusa.com/imagehosting/74a6a4bf25ca32.jpg]

[Ron380]

CHALLENGER RT WITH PEDDERS TOURING PACKAGE COILS
http://forums.peddersusa.com/imagehosting/74a6a4bf25ca32.jpg


How's that? ;)

How's what??

mike
dms

[DMS]

[QUOTE=Ron380;1852868]How's that? ;)



how's what??

mike
dms

[Ron380]

When you first posted the pic of the white Challenger, it had a lot of typo's in the syntax so the picture didn't show up... I fixed it for you. :grin:

[DMS]

when you first posted the pic of the white challenger, it had a lot of typo's in the syntax so the picture didn't show up... I fixed it for you. :grin:

thank you!!

Mike
dms

[BEAU-SOF]

hello,

im just looking for a 1 inch drop all around. do you have this??

[DMS]

hello,

im just looking for a 1 inch drop all around. do you have this??

There is a 40mm variation in heights between LXs. So it is not that easy. Which LX do you have and do you have Nivomat rear shocks

mike
dms

[BEAU-SOF]

i have a standard 08 RT.. no nivomat... i beleive the rear is slightly higher which i have no problem with.. i simply want a 1 inch drop all around... the rear will remain higher i imagine and im ok with that..

thanks

:)

[DMS]

i have a standard 08 RT.. no nivomat... i beleive the rear is slightly higher which i have no problem with.. i simply want a 1 inch drop all around... the rear will remain higher i imagine and im ok with that..

thanks

:)

Not trying to be a pain, but I want to be accurate for you. We also see some seriously high variations on the RTs, more than the other platforms.

So this is what info I have and you can check. Now these numbers are measured with 20 inch wheels and measured from the lower wheel lip, thru center, to the upper fender opening:

Pedders front coils:
2940 to 667mm
7940 to 692mm

Pedders Rear Coils
7026L is 663mm
5021 is 675mm
7981 is 700mm

Hope this helps

mike
dms

[beam3215]

Mike, how's the Honolulu project coming?

[BEAU-SOF]

hmmm... ok my bad.. i should have added that i own a charger rt with 18 inch wheels.... i am not sure you were under the impression i owned a challenger...

my mistake... thanks for the information..

[DMS]

Mike, how's the Honolulu project coming?

One place did not want to do it.

Revolution Motorsports Hawaii
426 Ward Avenue
Honolulu HI, 96814
808.593.9955 ph
808.593.9956 fx

Revolution Motor Sports says they want to be a Pedders dealer. We sent them the paperwork last week, and have not returned it. Made 2 phone calls and a email. So maybe they are at a 1 week long Luau or at the beach.

We are ready. Revolution just needs to get the paperwork to us. So maybe they are not interested as well.

So we are trying.

mike
dms

[DMS]

hmmm... ok my bad.. i should have added that i own a charger rt with 18 inch wheels.... i am not sure you were under the impression i owned a challenger...

my mistake... thanks for the information..

The heights I gave were for a Charger RT. But the numbers I gave were for 20 inch wheels. Just subtract 25mm from the numbers I posted

mike
dms

[beam3215]

One place did not want to do it.

Revolution Motorsports Hawaii
426 Ward Avenue
Honolulu HI, 96814
808.593.9955 ph
808.593.9956 fx

Revolution Motor Sports says they want to be a Pedders dealer. We sent them the paperwork last week, and have not returned it. Made 2 phone calls and a email. So maybe they are at a 1 week long Luau or at the beach.

We are ready. Revolution just needs to get the paperwork to us. So maybe they are not interested as well.

So we are trying.

mike
dms

I know you guys are working hard at a million things...thanks. I am going to go over there Monday, and lean on them! Take care. Andy.