Cyber Sale -- Sunday and Monday ONLY

[JusticePete]

SAVE 30 to 40% on Select LX Parts and Packages Sunday, November 30 and Monday December 1, 2008

It is an internet myth that you cannot lower you Nivomat equipped SRT8 and all other LX platforms. You can lower it within the operational parameters of the Nivomat rear load carrying shocks. Pedders will not only work with your Nivomats, your LX will feel better than it did brand new and you save 30% Included with the Pedders Nivomat Compatible Lowering Kit is the EP2113 Bumpsteer Reduction Kit. Pedders elegantly designed solution has no moving parts and will never wear out -- NEVER. If a Pedders EP2113 fails while you own your LX Pedders will replace it, regardless of mileage.

https://secure.merlinsoftware.com.au/peddersusa/Default.aspx?ProdCode=LX+KIT+A&Level1=CHRYSLER&Level2=LX

http://forums.peddersusa.com/imagehosting/84932d47aa96e3.jpg

Most LX vehicles delivered from Chrysler and Dodge were not Nivomat equipped. Pedders lowering coils are designed to be ride height compatible with our OE shocks and struts. This is a straight forward upgrade in both the look and control. Save 30% on Cyber Sunday or Cyber Monday. The LX Lowering B Package include EP1172 Rear Sub-Frame Bushes. Your launches will be hard with a more efficient energy transfer. Rear end step out is gone. The EP2113 Bumpsteer Correction Kit prolongs tire life by reducing bumpsteer. Your LX never drove this well.

https://secure.merlinsoftware.com.au/peddersusa/Default.aspx?ProdCode=LX+KIT+B&Level1=CHRYSLER&Level2=LX

http://forums.peddersusa.com/imagehosting/84932d47b7fa64.jpg

Gas Sports Ryder Shocks and Struts are designed to offer the best possible combination of ride quality and and handling. The twin tube low pressure nitrogen charged dampers are valved using Pedders exclusive Variable Rate Damping. The harder your push the firmer they get. Pedders LX dampers are compatible with OE coils, but work best mated to Pedders Sports Ryder LX coils. Matched to the LX B Lowering Kit you will have the SRT 8 that Chrysler should have built at the factory.

https://secure.merlinsoftware.com.au/peddersusa/Default.aspx?ProdCode=LXDAMPERPKG&Level1=CHRYSLER&Level2=LX

http://forums.peddersusa.com/imagehosting/84932d47c98c0a.jpg

You spent good money to mod your HEMI. You spent more on you wheel and tire package. Isn't time you get what you paid for when you launch hard, run corners under power or you favorite twisties? Installing Pedder EP1172 sub-frame bushes will stabilize you rear IRS assembly and make the single biggest difference on your LX of any mod at any price -- at 40% OFF during the Cyber Sunday and Monday Thanksgiving Holiday Sale.

https://secure.merlinsoftware.com.au/peddersusa/Default.aspx?ProdCode=EP1172&Level1=CHRYSLER&Level2=LX

http://forums.peddersusa.com/imagehosting/84754b01d8815f.jpg

LEARN MORE ABOUT MY LX SUSPENSION (http://www.peddersusa.com/products/17)


LEARN MORE ABOUT LX BUMPSTEER (http://forums.peddersusa.com/showthread.php?t=432)


Added to the Cyber Sale by Your Request

The LX Touring Kit includes four Sports Ryder coils, four Gas Sports Ryder dampers and an EP2113 Bumpsteer Correction Kit. We believe that this is the best combination of control and comfort available for the LX at any price.

https://secure.merlinsoftware.com.au/peddersusa/Default.aspx?ProdCode=LX%20TOUR%20PKG&Featured=Yes

http://forums.peddersusa.com/imagehosting/84932ff72ba969.jpg

Our LX Touring Kip Plus add Pedders EP6570 Radius Rob bushes to the Touring Kit. Radius rod wear, tears and failures can be found during your next oil change or vehicle service. With the vehicle on a four post lift and the wheels at full droop carefully inspect the condition of your radius rod bushes. A reddish brown ring is a sign of normal wear. It is oxidized rubber that shows where the bush flexes and no repair is required. If you find small cracks or tears the radius rod arms require service. Chrysler sells a replacement arm and not the individual bushes. Pedders sells only our urethane press in steel jacketed bush. Your local Pedders Dealer or shop can install these on both arms for less the the cost of one arm from Chrysler. Since you are adding Pedders performance tuned suspension bushes we suggest you install our Radius Rod Arm bushes for maximum improvement in performance.

https://secure.merlinsoftware.com.au/peddersusa/default.aspx?ProdCode=LXTOURINGPLUS

http://forums.peddersusa.com/imagehosting/84932ff7204fa1.jpg

LX Coil Package D use a 7026L rear coil that is 10mm lower than the 7026R. This stance has minimal rake from the rear to the front. It is a more European than American Muscle in stance and my personal preference.

https://secure.merlinsoftware.com.au/peddersusa/Default.aspx?ProdCode=LX+KIT+D&Level1=CHRYSLER&Level2=LX

http://forums.peddersusa.com/imagehosting/8493306475fcd8.jpg

[Rob@WretchedMS]

Great chance to get some GREAT parts SUPER CHEAP!

We have tons in stock and ready to ship.

[DMS]

Here are some pictures of our basic drop coils used with our struts. The coils are 2940 front coils and 7026R Rear coils

Pedders Drop coils ad 22 inch wheels
http://forums.peddersusa.com/imagehosting/74920e3a813c14.jpg

Pedders Drop coils and 20 inch wheels
http://forums.peddersusa.com/imagehosting/74920e3a993981.jpg
Pedders Drop Coils and 20 inch OEM Magnum
http://forums.peddersusa.com/imagehosting/749335eb457fd4.jpg

thanks
mike
dms

[TopBanana107]

I have a Daytona with the Nivomats. I bought 20" MSRT wheels that I will be installing in the spring. Will lowering my car create problems with wheel rub in the front? I do have 3mm spacers that I need to use already...so I was just wondering. With the 20s I would want to drop the car so that it has a nice stance...so can your lowering coils be used with OE shocks all around?

With Nivomats -- 2940/2941
WithOUT Nivomats -- 2940/7026R

No issues with 20s.

[JusticePete]

I have a Daytona with the Nivomats. I bought 20" MSRT wheels that I will be installing in the spring. Will lowering my car create problems with wheel rub in the front? I do have 3mm spacers that I need to use already...so I was just wondering. With the 20s I would want to drop the car so that it has a nice stance...so can your lowering coils be used with OE shocks all around?You should be good to go with no rub spots.

[TopBanana107]

So 4 coils and the recommended bump steer kit? I should be good? How much is this? Really interested...

[JusticePete]

so 4 coils and the recommended bump steer kit? I should be good? How much is this? Really interested...
$308.02

[DMS]

I have a Daytona with the Nivomats. I bought 20" MSRT wheels that I will be installing in the spring. Will lowering my car create problems with wheel rub in the front? I do have 3mm spacers that I need to use already...so I was just wondering. With the 20s I would want to drop the car so that it has a nice stance...so can your lowering coils be used with OE shocks all around?



Here is a picture of coils only.

mike
dms
http://forums.peddersusa.com/imagehosting/749340d25bc50f.jpg

[TopBanana107]

Nice... How much would shipping be to Canada J2K4J3? If I understand correctly, my OEM shocks in the front will not be compromised using your coils? Just asking because the dealer is replacing them in spring (under warranty) , when my car comes out of storage.

[DMS]

Nice... How much would shipping be to Canada J2K4J3? If I understand correctly, my OEM shocks in the front will not be compromised using your coils? Just asking because the dealer is replacing them in spring (under warranty) , when my car comes out of storage.

I am checking on it now.

mike
dms

[TopBanana107]

I am checking on it now.

mike
dms

Thanks...free would be great! :rocker:

C,mon, c'mon...that would seal the deal!!!:D

[DMS]

Thanks...free would be great! :rocker:

C,mon, c'mon...that would seal the deal!!!:D

Shipping is $68

thanks
mike
dms

[JusticePete]

My OEM shocks in the front will not be compromised using your coils? Just asking because the dealer is replacing them in spring (under warranty) , when my car comes out of storage.Our coils are absolutely positively 100% compatible with the OEM shocks and struts.

[DMS]

Guys,

I forgot a couple of coil opportunities. Here they are:

Pedders Drop coils ad 22 inch wheels
http://forums.peddersusa.com/imagehosting/74920e3a813c14.jpg

Pedders Drop coils and 20 inch wheels
http://forums.peddersusa.com/imagehosting/74920e3a993981.jpg

Pedders Drop Coils and 20 inch OEM Magnum
http://forums.peddersusa.com/imagehosting/749335eb457fd4.jpg
Challenger with Drag Coils in the back
http://forums.peddersusa.com/imagehosting/749345d1e91ace.jpg

Coils only using OEM dampers
http://forums.peddersusa.com/imagehosting/749340d25bc50f.jpg

thanks
Mike
dms

[JusticePete]

That Challenger is begging for a set on M/Ts. Can't you just see that mother at launch full of wrinkles and smoke?

[DMS]

One of the great things about our Pedders coils is that they are more
compatible with OEM coils than most other aftermarket coils. There have
been lots of aftermarket, non Pedders coils, installed on OEM dampers,
which created shock/strut problems. Now it is better, in all conditions,
to install cour Pedders dampers to our Pedders coils. Our Pedders
dampers are made specifically to complement our Pedders coils and do a
great job with them, and your handling will be better with our dampers
and springs, than without our dampers. But t is a personal decision on
what you want to do.

So if you have in mind just updating your coils, have no fear that our
coils will work well with your OEM shocks. We have 2 different coils for
the rear. Ones for Nivomats and ones without. If you need assistance
with the selection, all you have to do is ask. Pedders is ALWAYS here
for this communty

thanks
mike
dms

[JusticePete]

Just Added by Customer Request Good to Midnight EST ONLY

Pedders Track II Bush Kit. If yoiu already own KW coilovers but have not uprgraded you LX chassis bushes, you are getting minimal benefit for your suspension investment. There are more than 40 highlycompliant rubber bushes in your suspension. Collectively, they allow so much movement that the higher spring and damping rates of your KWs are wasted. Get you LX Track Ready with your KWs by replacing 34 of them with Pedders Track II Bush Kit. Retail $1,925.53 Cyber Sale Price $1347.87 SAVE $577.65

http://forums.peddersusa.com/imagehosting/84934790ac2ce8.jpg

https://secure.merlinsoftware.com.au/peddersusa/Default.aspx?ProdCode=LX+TRK+BUSH+KIT&Level1=CHRYSLER&Level2=LX

[JusticePete]

Just Added by Customer Request Good to Midnight EST ONLY

Pedders Track II Bush Kit. If yoiu already own KW coilovers but have not uprgraded you LX chassis bushes, you are getting minimal benefit for your suspension investment. There are more than 40 highly compliant rubber bushes in your suspension. Collectively, they allow so much movement that the higher spring and damping rates of your KWs are wasted. Get you LX Track Ready with your KWs by replacing 34 of them with Pedders Track II Bush Kit. Retail $1,925.53 Cyber Sale Price $1347.87 SAVE $577.65

http://forums.peddersusa.com/imagehosting/84934790ac2ce8.jpg

https://secure.merlinsoftware.com.au/peddersusa/Default.aspx?ProdCode=LX+TRK+BUSH+KIT&Level1=CHRYSLER&Level2=LX

[Rob@WretchedMS]

also added 2 AWD Kits

LX AWD Lowering Kit A
http://wretchedmotorsports.com/images/LXLoweringKit1-150.png (http://wretchedmotorsports.com/product_info.php?cPath=64_65_80&products_id=599)
LX AWD Lowering Kit A (http://wretchedmotorsports.com/product_info.php?cPath=64_65_80&products_id=599)
$336.57
http://wretchedmotorsports.com/templates/Wretched63/images/buttons/english/button_buy_now.gif (http://wretchedmotorsports.com/index.php?action=buy_now&products_id=599&cPath=64_65_80)

LX AWD Lowering Kit B
http://wretchedmotorsports.com/images/LXLoweringKitB-150.png (http://wretchedmotorsports.com/product_info.php?cPath=64_65_80&products_id=600)
LX AWD Lowering Kit B (http://wretchedmotorsports.com/product_info.php?cPath=64_65_80&products_id=600)
$695.18
http://wretchedmotorsports.com/templates/Wretched63/images/buttons/english/button_buy_now.gif (http://wretchedmotorsports.com/index.php?action=buy_now&products_id=600&cPath=64_65_80)

[TopBanana107]

Rob, how easy is it of a job to do in one's garage. My buddy's is pretty well equipped...

[DMS]

Guys,

Pete might ill me on this, but what the hell!! Pete and Deb's little girl had a little accident at school and she dislocated her elbow. They spent a bunch of time at the hospital getting her arm in a splint. She is doing just fine thank God. But if any of you have a 5 year old princess that is not feeling well, you know what it takes to make her happy and comfortable. Because of this, Deb has not been able to take the sales price off of the internet merlin store.

So if you missed the killer deals, you have until maybe very early tomorrow morning to sneak a order in. I know of 2 people that I have helped today do it. So get me in trouble and place your orders in tonight and put the savings into some Christmas presents.

Thanks to all.

So tonight will be titled GET MIKE WHITE IN TROUBLE SALE!!!

thanks
mike
dms

[JusticePete]

Guys,

Pete might ill me on this, but what the hell!! Pete and Deb's little girl had a little accident at school and she dislocated her elbow. They spent a bunch of time at the hospital getting her arm in a splint. She is doing just fine thank God. But if any of you have a 5 year old princess that is not feeling well, you know what it takes to make her happy and comfortable. Because of this, Deb has not been able to take the sales price off of the internet merlin store.

So if you missed the killer deals, you have until maybe very early tomorrow morning to sneak a order in. I know of 2 people that I have helped today do it. So get me in trouble and place your orders in tonight and put the savings into some Christmas presents.

Thanks to all.

So tonight will be titled GET MIKE WHITE IN TROUBLE SALE!!!

thanks
mike
dms

We have http://www.freesmileys.org/smileys/forum/rulez.gif and you broke them.....
















just like I would have.