PDA

View Full Version : Nitrous and Boost




fact9c1
11-21-2008, 05:06 PM
have any you guys ran boost (10 pounds) and nitrous(50shot) on a stock srt8. If so what was the results hp, e.t., or mishap did you get




RitzRT
11-21-2008, 06:04 PM
A tuning nightmare. I doubt very many people are bothering with it. How is the ECM supposed to know if you're on the bottle or not? Very easy to make your expensive engine go kaboom.

FlyByU
11-21-2008, 10:10 PM
SRT-Hardware and Hemi~C have both done about that much and a much bigger nitrous shot. If the car is properly tuned on the blower, the nitrous is pretty much just jetting to maintain a proper AFR. You will have to forge your bottom end to handle this much power which both guys Ive mentioned have done.

fact9c1
11-21-2008, 11:23 PM
i am going 2 try a small shot (40 hp) im really looking for the coolin effect from the nitrous, whats ur opinion on this guys?

SubTexel
11-22-2008, 02:13 PM
i am going 2 try a small shot (40 hp) im really looking for the coolin effect from the nitrous, whats ur opinion on this guys?

Get a water/meth kit then if all you want to do is lower EGTs, it also gives you a nice boost as well.

rdunn
11-22-2008, 03:44 PM
agree with the water/meth kit. alot of people use the nitrous to help spool the turbos off of the line. but if your just wanting to cool the charge down,get the meth kit. you cant beat it.

CHARGERTREV
11-22-2008, 04:09 PM
Get a snow kit....X3 on meth

PPP-Sales
11-25-2008, 07:48 AM
10psi and 100shot would most likely blow a stock SRT8 engine. We have had customers running 8psi or less and NO N02 come here with blown engines. If you want to keep it reliable, run 5-6ish PSi and water meth-- thats your best chance at keeping it alive for the long haul.

PPP forged engines can easily handle it with proper tuning. We have new pricing, check it our in our vender section.

fact9c1
11-25-2008, 09:19 PM
im going to run 10psi and around 40shot of n20

RobAGD
11-25-2008, 10:05 PM
you dont read so good do you ?

-R

lafrad
11-25-2008, 10:06 PM
10 psi does have a chance of living, 40 shot with it.

It will take a HUGE understanding that the chances of surviving to reach a good power number is very VERY slim. Be prepared to be replacing the pistons/rods, and cleaning up the heads. be VERY prepared.