Fog light install help [Archive] - Dodge Charger Forums

: Fog light install help


SilverV6
04-15-2008, 07:26 PM
I am installing the OEM Mopar fog light kit for my V6 SE. I am almost done but not sure where to insert the yellow/white cable in the fuse box.

In this write up (http://www.chargerforums.com/forums/showthread.php?t=53379&highlight=fog+install) JVracer04 says “Remove the gray connector and the red retainer plug to remove the yellow/white wire …and grab the connector with the yellow/white wire from the mopar kit and install it in the same slot”. My car doesn’t have the WT/YL cable, so I don’t’ know which is the right slot in the grey connector. The instruction says “L89/CAV19”. What does that mean? Can anybody help me out with this?

gstealer
04-15-2008, 07:52 PM
What year charger and what year light kit you got?

If you trying to put an 06-07 Kit into an 08 Charger it wont work. Fuse box is different in the 08.

SilverV6
04-15-2008, 07:58 PM
My Charger is a 2007.The grey connector looks like this without the yellow/white cable. Fuse 7 is already there in the fuse box.

http://i2.photobucket.com/albums/y37/Jvracer04/charger_writeup/P1010047.jpg

RB8484
04-15-2008, 08:05 PM
If I had my car, I would go out and look for you......but its in getting some paint work done. Good luck!

BURedbeard
04-15-2008, 08:56 PM
i did this the other day. put the new yellow wire in the slot right next to the grey one. so using that pic as a reference, it would look like (from left to right) greyish wire, skip a slot, pinkish, skip a spot, pinkish, skip a spot, grey, new yellow wire.

I initially followed the "skit a spot" method but they didnt work when i had them flashed. If for some chance you get it all hooked up and they dont work after the flash you can just move the wire to the right place and they will work.

If my explanation is still confusing PM me and i will try to answer it more clearly. Hope this helps, good luck.