Single Din Flip out DVD/NAV

[madddog103]

Hey guys i was curious if anyone has put in a single DIN flip out (i am installing a AVIC N1) into my sxt this weekend. What am I to do to the excess space surrounding the unit. You know like the space i will be able to see through where the unit doesnt cover? any ideas? any pictures of installed units would be cool.

Thanks, John

[PGCHARGER]

you need to get the mounting bracket from best buy or some other audio store. I installed a AVIC N2 in my charger. The bracket gives you another lil cubby hole right underneth the unit

[Swift]

you need to get the mounting bracket from best buy or some other audio store. I installed a AVIC N2 in my charger. The bracket gives you another lil cubby hole right underneth the unit

Yuuup. I saw an SXT with one of those, but he filled that cubby with a fab'd filler that had SXT in chrome lettering in the middle. Looked sharp.

[madddog103]

nicee aright thanks alot guys i think i can rig somethin together...doin it this sunday hopefully so ill post some pics when its done!

[SHiZNiLTi]

Do you allready know where the speed sensor wire is?

[newchargerowner]

Do you allready know where the speed sensor wire is?

Is this so you can watch a DVD while driving? If so, please share as I have a Jensen 9512 on order.

[madddog103]

nahh i have no idea where the sensor is im hoping when i take the dash out me and my mechanic friend can locate it...and no its for the gps and vehicle dynamics the AVIC n1 has in it. It like shows your speedometer on the unit its pretty cool

[newchargerowner]

nahh i have no idea where the sensor is im hoping when i take the dash out me and my mechanic friend can locate it...and no its for the gps and vehicle dynamics the AVIC n1 has in it. It like shows your speedometer on the unit its pretty cool


Oh...my bad...I'm an idiot.:(

[SE+HO]

Do you allready know where the speed sensor wire is?

For anyone looking for the Speed Sense wire in the future, here's the info from Audiovox's Tech Services website that I use to get wiring for remote start/alarm/audio installs...

All 2006 – 2007...
DARK GREEN/BROWN AT PCM MODULE ON PASSENGER SIDE FIREWALL

All 2008
DARK GREEN/BROWN AT PCM MODULE ON PASSENGER FENDER UNDER HOOD


Though they've been right on 99% of the info I've obtained over the years, I guess I should also post...

"Note: Audiovox makes no representation or warranty with respect to the above information including its accuracy, completeness, or its freedom from third parties' proprietary rights. Audiovox disclaims all liability or responsibility for errors or omissions therein or any decision made by the recipient in reliance thereon. The installer must verify any circuitry with the proper test equipment prior to installation."