PDA

View Full Version : Help With Bezel



Slickwillie74
03-14-2008, 07:30 AM
I have read a bunch of post on here about installing a nav system in a V6. Apparently all you need to do is by the factory bezel for an SRT and change it out. What confuses me is where does the extra space come from? Does the SRT have the little storage space below the A/C? If not, do you have to move the A/C controls down to install the new bezel? Any info you can give me would be great. PICTURES too of the inside of your ride with a nav/DVD installed.



PlumCrazy1091
03-14-2008, 07:35 AM
You loose the storage tray at the bottom and the controls drop down.
Slickwillie74
03-14-2008, 09:41 AM
You loose the storage tray at the bottom and the controls drop down.

How do you move the A/C controls down? It is easy. I do not mind lossing the storage. what DVD is good. any one have the Kenwood DDX7019
Slickwillie74
03-14-2008, 09:58 AM
Do you have to move the hazard and other buttons down?
Sublimeon22s
03-14-2008, 10:14 AM
Do you have to move the hazard and other buttons down?

No the esp, hazard, etc stay where they are. The only thing that gets moved down is the AC unit controls. there are 4 screws you unbolt from your current bezel and bolt them back in to the new bezel that has them a little lower. No custom mods or anything like that, it took me 10 min total when i switched to nav
chargeit2thegame
03-14-2008, 10:32 AM
No the esp, hazard, etc stay where they are. The only thing that gets moved down is the AC unit controls. there are 4 screws you unbolt from your current bezel and bolt them back in to the new bezel that has them a little lower. No custom mods or anything like that, it took me 10 min total when i switched to navditto that...heres pics of what my dash looked like before navi...http://photo.ringo.com/257/257036019RM669411583.jpg
and after..http://photo.ringo.com/257/257036077RM288980511.jpg