Installing Boston acoustics 10" sub and Lanzar 1000w amp

[OVERCHARGER]

Hi, Im trying to install a Boston Acoustics 10" sub and Lanzar 1000w amp...I have a 2007 Charger 3.5SE...i was wondering if i have to go through the back of the factory deck to install or is there another way...thanks...

[wickedchargerrt]

You'll have to run audio to that sub and that depends on the amp. If your running high input speaker wires you can use a modulator off the rear speakers but thats kinda ghetto. You need to end up with rca'sfor the audio which the stock unit doesn have. So either you have to replace the stock reciever or get a modulator to convert the wires to rcas but i dont recommend that cause then your pulling resistance of one speaker to run the sub. You also need to pull the stock unit to get power for your remote turn on lead.

To do it right you need to replace your stock head unit or buy the amps that come on the daytonas