Ghostface Mag
11-08-2007, 08:37 PM
BWoody Cold Air Intake $359.99 (retail)
Sale: $294.95 + $24.95 CONUS shipping (plus additional $20 for single stage paint and $35 for dual stage paint)
Sales Ends the end of this month!!
http://www.lxforums.com/board/attachment.php?attachmentid=10517&d=1194569558
Info:
Here it is the True Cold Air Intake available for the LX and Jeep platform The intake fits the 6.1L hemi as well as the 5.7L hemi. We have experienced 1.2 to 2.6 mpg gain!!! Dash hawk temps at WOT are 3-4 degrees lower than ambient temps, Dash hawk 0-60 has decreased by .3, on our bone stock Charger SRT-8 with the K&N drop in and the snorkel mod our 1/4 mile time was 13.426, with the BWoody cold air intake we now run a 13.221 consistently, thats a .215 decrease in the 1/4 mile on a bone stock Charger SRT-8!!
Flowbench results showed a whopping 224.5 cfm increase over the OEM airbox!!
Our intake was dyno tested against a competitors and showed an 7.1 hp. and 11.6 tq. gain!!
Our intake was also dyno tested against the OEM intake and showed a 16.3 whp gain!!!
Color shown is Supergloss red (inferno red) with black silicone couplers
Standard colors are silver and wrinkle black, silicone couplers are black, blue or red please write in the notes what color couplers you want. If you wish to have a custom color please choose in the drop down boxes below. If you don't see the color you want please contact us we have over 150 colors in stock.
Some colors on actual parts can be found here: http://www.srtforums.com/forums/showthread.php?t=334805 (http://www.srtforums.com/forums/showthread.php?t=334805)
Powder Coating Colors Available:
wrinkle black (single stage)
silver (single stage)
extreme chrome (single stage)
lime green (single stage)
bright red (single stage)
yellow (single stage)
white (single stage)
mopar orange (single stage)
neon pink (single stage)
pastel pink (single stage)
chevy Orange (single stage)http://www.lxforums.com/board/images/smilies/icon_mrgreen.gif
hotrod black (single stage)
midnite blue wrinkle (single stage)
mopar blue (single stage)
stamped steel (single stage)
flat black (single stage)
off white (single stage)
gold (single stage)
bronze (single stage)
med denim blue (single stage)
platinum (single stage)
gray metallic (single stage)
rally wheel silver (single stage)
black w/copper vein (2 stage)
black w/silver vein (2 stage)
super gloss black (2 stage)
super gloss yellow (2 stage)
super gloss red (2 stage)
starlight candy blue (2 stage)
anodized candy red (2 stage)
anodized candy emerald green (2 stage)
anodized violet (2 stage)
anodized gold (2 stage)
super chrome (2 stage)
e-blue (2 stage)
candy orange (2 stage)
smoke chrome (2 stage)
candy copper (2 stage)
prismatic black (2 stage)
antricite (2 stage)
prismatic anodized red (2 stage)
denim metallic blue (2 stage)
grape flake (2 stage)
anodized grape (2 stage)
starlight Candy Red (2stage)
iridescent amethyst (2 stage)
iridescent indigo (2 stage)
ultra metallic silver (2 stage)
gun metal (2 stage)
Thanks
Derrick@ HHP Racing
Sale: $294.95 + $24.95 CONUS shipping (plus additional $20 for single stage paint and $35 for dual stage paint)
Sales Ends the end of this month!!
http://www.lxforums.com/board/attachment.php?attachmentid=10517&d=1194569558
Info:
Here it is the True Cold Air Intake available for the LX and Jeep platform The intake fits the 6.1L hemi as well as the 5.7L hemi. We have experienced 1.2 to 2.6 mpg gain!!! Dash hawk temps at WOT are 3-4 degrees lower than ambient temps, Dash hawk 0-60 has decreased by .3, on our bone stock Charger SRT-8 with the K&N drop in and the snorkel mod our 1/4 mile time was 13.426, with the BWoody cold air intake we now run a 13.221 consistently, thats a .215 decrease in the 1/4 mile on a bone stock Charger SRT-8!!
Flowbench results showed a whopping 224.5 cfm increase over the OEM airbox!!
Our intake was dyno tested against a competitors and showed an 7.1 hp. and 11.6 tq. gain!!
Our intake was also dyno tested against the OEM intake and showed a 16.3 whp gain!!!
Color shown is Supergloss red (inferno red) with black silicone couplers
Standard colors are silver and wrinkle black, silicone couplers are black, blue or red please write in the notes what color couplers you want. If you wish to have a custom color please choose in the drop down boxes below. If you don't see the color you want please contact us we have over 150 colors in stock.
Some colors on actual parts can be found here: http://www.srtforums.com/forums/showthread.php?t=334805 (http://www.srtforums.com/forums/showthread.php?t=334805)
Powder Coating Colors Available:
wrinkle black (single stage)
silver (single stage)
extreme chrome (single stage)
lime green (single stage)
bright red (single stage)
yellow (single stage)
white (single stage)
mopar orange (single stage)
neon pink (single stage)
pastel pink (single stage)
chevy Orange (single stage)http://www.lxforums.com/board/images/smilies/icon_mrgreen.gif
hotrod black (single stage)
midnite blue wrinkle (single stage)
mopar blue (single stage)
stamped steel (single stage)
flat black (single stage)
off white (single stage)
gold (single stage)
bronze (single stage)
med denim blue (single stage)
platinum (single stage)
gray metallic (single stage)
rally wheel silver (single stage)
black w/copper vein (2 stage)
black w/silver vein (2 stage)
super gloss black (2 stage)
super gloss yellow (2 stage)
super gloss red (2 stage)
starlight candy blue (2 stage)
anodized candy red (2 stage)
anodized candy emerald green (2 stage)
anodized violet (2 stage)
anodized gold (2 stage)
super chrome (2 stage)
e-blue (2 stage)
candy orange (2 stage)
smoke chrome (2 stage)
candy copper (2 stage)
prismatic black (2 stage)
antricite (2 stage)
prismatic anodized red (2 stage)
denim metallic blue (2 stage)
grape flake (2 stage)
anodized grape (2 stage)
starlight Candy Red (2stage)
iridescent amethyst (2 stage)
iridescent indigo (2 stage)
ultra metallic silver (2 stage)
gun metal (2 stage)
Thanks
Derrick@ HHP Racing