new Decals installed- From RiderGraphix

[1fastbanana]

Just wanted to share some photos of the new decals I purchased from RiderGraphix.... I love them, totally changes the look of the car... Not to mention they were shipped very, very quickly (ordered late sunday night, had them by Wednesday) Saving the day! As I am leaving for DAYTONA BEACH in a few days, and Had to replace the Trunk lid blackout due to somebody damaging the original one on the car! Figured I would get the two others at the same time.

Also wanted to point out, that I had them professionally installed, and the guy doing them said that they were the best decals he had ever installed!!!!


Charger RT (old school) on front bumper:
http://i190.photobucket.com/albums/z107/1fastbanana/100_4432.jpg

Top Banana below bumper:
http://i190.photobucket.com/albums/z107/1fastbanana/100_4426.jpg

Trunk Lid black out:
http://i190.photobucket.com/albums/z107/1fastbanana/100_4425nl.jpg

[charginscott]

Sweet - I like the bumber black out

Scott

[SublimeInMA]

whats the HP gain on those??













hahaha just kidding, looks great! I like the one between the pipes, debating that one myself

Have fun in DB

Tom

[drider98]

We can customize one for you with your Sublime #1383......

[SublimeInMA]

We can customize one for you with your Sublime #1383......

dont think I havent thought about it, just have to enable the finances is all.

[1fastbanana]

dont think I havent thought about it, just have to enable the finances is all.


I LOVE THEM!!!! It's definately worth it!!!!!!!!!

[REX-TB#390]

Looks Great!!:headbang: :rockon:

I have the lower rear fascia one also and love it.

Rex

[BlueKnights]

Trunk blackout is Sweet!! Got me thinking......

[1fastbanana]

Trunk blackout is Sweet!! Got me thinking......

Stop thinking, and just do it!!!!!!!!!! :evil: (says the evil voice)

[1fastbanana]

Wanted to add a few more pics, the ones I put up the other day don't do the back end justice (shadows on it), so here they are:

http://i190.photobucket.com/albums/z107/1fastbanana/100_4452.jpg

http://i190.photobucket.com/albums/z107/1fastbanana/100_4457.jpg

Enjoy! Drider98, thought ya might like one or both of these better for your web site (I think these turned out better)

[TBYDaytona40]

Man, I am loving the blackout with the cutout badges! I did the same thing last week. Here's mine.

[1fastbanana]

I would have loved to have had it customized a bit, but figured it probably would have taken a bit longer (and as stated, leaving for Florida in a few days), I didn't want to take a chance of not having it in time.......

Bad timing, I guess!!!

[AB Charger]

I really like it, but I think you should lose the dealer license plate frame...

[1fastbanana]

I really like it, but I think you should lose the dealer license plate frame...

I agree!!! It will be getting replaced hopefully next week... I am going to Daytona Beach, so I should find something down there that I like!!

[1fastbanana]

I agree!!! It will be getting replaced hopefully next week... I am going to Daytona Beach, so I should find something down there that I like!!

Well, here it is!!!!!!!!!!!!!!!!!!!!!!!!

http://i190.photobucket.com/albums/z107/1fastbanana/100_4955nl.jpg
A little closer up!:
http://i190.photobucket.com/albums/z107/1fastbanana/100_4956nl.jpg

[TBYDaytona40]

Looks great bro!

[DAYTONA3949]

Looks great. RiderGraphixs did a awesome job on the decals

[1fastbanana]

Looks great. RiderGraphixs did a awesome job on the decals


Yes they did!!! I highly recommend them!!!!!!!!!!!!!!!!!!

[Bravo]

Hey guys just a question about this deck lid blackout, does it wrap around the sides of the trunk lid like the factory one or does it stop just short... Just checking some of those pics looked like it was very close but not quite all the way around ..

[MR-SMITH]

Looks good. I have been worried about difficulty of install. I might check into getting it professionally installed. Did you remove the old one yourself? Was it that bad?

[1fastbanana]

Hey guys just a question about this deck lid blackout, does it wrap around the sides of the trunk lid like the factory one or does it stop just short... Just checking some of those pics looked like it was very close but not quite all the way around ..

It does not go as far around the sides as the factory one did, but it still looks awesome!

Looks good. I have been worried about difficulty of install. I might check into getting it professionally installed. Did you remove the old one yourself? Was it that bad?

I was not going to chance putting it on myself, never been good with that kind of thing, so I went with a professional- They also removed the old one for me while they were at it, but that I could have done if I wanted to, with a blow dryer, and a lot of elbow grease.... Then waxing it up good afterwards.

[MR-SMITH]

Cool. I guess now I gotta find somewhere that will install it then.

[autoguy]

Hey guys just a question about this deck lid blackout, does it wrap around the sides of the trunk lid like the factory one or does it stop just short... Just checking some of those pics looked like it was very close but not quite all the way around ..

Our Trunk Blackout decal is an exact replica of the factory one. It wraps around the sides the same way as the Daytona decal does from the factory.

[Bravo]

Thanx autoguy and thanx fast banana for the replies, I guess your decals came from different places.. anywayz, I pulled the trigger before you had replied and got a whole bunch of decals elsewhere, But if the trunk lid blackout that I recieve leaves to much paint showing on the edges I'll be ordering one from rider.. thanx guys

[SUPERMAN]

[QUOTE=1fastbanana;808107]Well, here it is!!!!!!!!!!!!!!!!!!!!!!!!



VERY NICE!! Question for you which one did you get? Gloss Black or Matt Black? Just wanted to know, im thinking of following in your foot steps!:grin:

Thanks!

[1fastbanana]

[QUOTE=1fastbanana;808107]Well, here it is!!!!!!!!!!!!!!!!!!!!!!!!



VERY NICE!! Question for you which one did you get? Gloss Black or Matt Black? Just wanted to know, im thinking of following in your foot steps!:grin:

Thanks!

I believe you were talking about the decals (not the License plate cover that you quoted the post)
I got the matte black (flat black)- At first they looked a bit "shinier" (spelling) than the originals, but that was because the originals had faded a bit. I used "ice" on them and now they look even!

[SUPERMAN]

Yea I was talking about the decals..... sorry for the confusion. Thanks for the Info!

[ananimous_5]

where did u get the decals installed at?

[1MEANR/T]

Looks awsome...