T-Handle

[BilletTechnology]

The guys on LX Forums have been beating my a$$ on this. I have pic's today. We took long on this because we wanted to ensure we could protect our design (dress patent and we are on the verge of a utility patent so the attorney said ok to show your pics). This set up will be modular in nature meaning that you will be able to snap and lock other shifters the we design on to the shaft portion (just click and lock). No one company has addressed the shaft issue and we did just that. You will be able to adjust the position of the handle also.

The handle shown here will be the general design, but a bit thicker. Mike Stone was at our facility today (a member here) and he loved the shifter. We let him give us his thoughts on it. Feed back is appreciated. We will be going into production within the next week to 10 days.

The finish shown is brushed with clear coat anodize on it. We will offer these polished, brushed as shown and in either satin black, mirror black, mirror blue, and mirror red.

Feed back is appreciated. Mike Stone if you are reading come on in and chim in with your thoughts after the visit to the shop today.

[BilletTechnology]

More pics' Please give us your feedback

[PimpLay2]

wait i just bought a custome engraved shifter from you so my shifter could fit on top of that?

[Ruff n Tuff RT]

damn i could roll a blunt on top of the mudaf*#ker

[HKLEVI]

How high up is it compared to say the stock shifter? I just put in the VES and found that the arm rest is a bit higher than the old one and I would like to have it a bit higher. I can't wait to see the end product. You have defiantly hit a home run on this IMO.

[BilletTechnology]

How high up is it compared to say the stock shifter? I just put in the VES and found that the arm rest is a bit higher than the old one and I would like to have it a bit higher. I can't wait to see the end product. You have defiantly hit a home run on this IMO.

I will get more infor on this for you (in relationship to the arm rest).

Once you all see the thicker t-shift portion of it I do believe we have a good design here. Again, this is a product that you must see in the car to get how cool it looks.

[BilletTechnology]

wait i just bought a custome engraved shifter from you so my shifter could fit on top of that?


Not the current pistol grip no, but we have plans to do something and I think you all will like that too. :)

[BilletTechnology]

The shaft portion screws into place snug and tight; the handle portion clips and locks down in place. You will be able to adjust your T-Handle portion left or right however it suit you.

[infernocharger07]

It's kinda bulky, but I bet it looks allot better anodized or powder coated. I myself have the powder coated ball type shifter y'all have and I would have to rate this one last compared to to other shifters you sell. (#1 Pistol grip #2 Ball type #3 This T-handle. Oh but still the first thing in the pic that caught my eye was the shift bezel. Maybe more of a rounded design kind of like the old hurst, but just give it a BilletTech look. Oh and I think a straight shank would be better, It starts huge at the top with that huge handle and shrinks down like a straw. Well theres my opinion.
Good luck

Marcos

[1000HEMI]

Looks Great I Can't Wait Until The Finish Product
One Of These Day I will Get Down To See You Guys.

[BilletTechnology]

It's kinda bulky, but I bet it looks allot better anodized or powder coated. I myself have the powder coated ball type shifter y'all have and I would have to rate this one last compared to to other shifters you sell. (#1 Pistol grip #2 Ball type #3 This T-handle. Oh but still the first thing in the pic that caught my eye was the shift bezel. Maybe more of a rounded design kind of like the old hurst, but just give it a BilletTech look. Oh and I think a straight shank would be better, It starts huge at the top with that huge handle and shrinks down like a straw. Well theres my opinion.
Good luck

Marcos

Here are a few of the different styles of T-Handle we have created. We have option D for you input. Please feel free to give feedback. for option D

[BilletTechnology]

Some of the biggest input we have gotten from many folks we talked to was they wanted a T-Handle that kind of was old and new fused. This is bascially where we came with this infused design. We don't want to knock off Hurst.

[HKLEVI]

Man, I'm in between option B and C untill I get to see D....

[BilletTechnology]

Again, folks please as with the pistol grip your input and suggestions are critical as we want to give you a custom piece you will be proud to have.

To answer the more rounded question, we have another one on the machine now that I think will be more to the old school foks liking.

[infernocharger07]

Here are a few of the different styles of T-Handle we have created. We have option D for you input. Please feel free to give feedback. for option D

For Option ''D'' how about getting a pistol grip shifter mounting it T style, call it a day, and Ill love it. I like the pistolgrips finger cuts the ones on the A-C are rounded out too much IMO, kinda looks like the coin saver in the armrest, all im saying is A-C are all kinda the same, how bout making "d" a little different, and everyone loved your pistol grip, so mount it up there!!!

[infernocharger07]

Again, folks please as with the pistol grip your input and suggestions are critical as we want to give you a custom piece you will be proud to have.

To answer the more rounded question, we have another one on the machine now that I think will be more to the old school folks liking.

Thanks thats what im after, but im offended because I'm only twenty!!

[OSUthunder]

not too bad, I cant wait to see a "finished" product.

deff like c the best of those 3. A is too pointy.

I think it would look sweet if you rounded the back edge more like the hurst style and let the front edge be angular like these or the pistol grips you already have. I would like it to be smooth and fit nicely into my palm on the back.

does the "clip on" knob hold really tightly? i wouldnt want it to have any shake or shimmy in it.

nice work guys!

[BilletTechnology]

not too bad, I cant wait to see a "finished" product.

deff like c the best of those 3. A is too pointy.

I think it would look sweet if you rounded the back edge more like the hurst style and let the front edge be angular like these or the pistol grips you already have. I would like it to be smooth and fit nicely into my palm on the back.

does the "clip on" knob hold really tightly? i wouldnt want it to have any shake or shimmy in it.

nice work guys!


Excellent feedback and thank you. I will be sending the guys into the threads now to interact with you all as we did with the Pistol Grip. It was important for us to secure our patents before we posted pic's This modular setup is going to be very nice for future shifters to be added to it

[DeekDaddy]

B and C look nice. I agree A is a little too pointy.

[BilletTechnology]

Folks enjoy the rest of your evening. I'll be back on tomorrow and have the boys in here to to chat with you all. Hey Mike I see you lurking, give the guys some feedback of what you saw today.

[DAYTONA3949]

Hedi

Just want to tell you that I think the thicker shaft and thicker handle is the way to go as we discuss when I was at the shop today. I also beleive the handle being interchangable is going to be a get option for many? When you start putting colors on the handles they are going to look amazing. I look forward to seeing you, Neal, and Dan real soon? Again I can't thank you and your team enough!!

Mike

[OSUthunder]

OH one more thing, shave/angle a bit of the bottom thumb side like you have done on the pistol grips =)

(ok make it two things) make the stalk tapered instead of flat.

[Nomad^Phoenix]

Heidi, I'm thinking that I like A & B the best. That said, let me deconstruct them to their best and worst points. Literally. A is a bit pointy and might actually hurt! However, the right hand side is a sweet little angle, and I like that better than the B option. The B option has less points and the right hand side isn't so bad...better than option C, in my opinion.

The stalk seems to make the full fledged example look out of place. It tapers in a way that looks inconsistent with Dodge's interior. Perhaps a straight pipe would be just as effective. This also might seem like a strange request, but it would be nice to see pics with someone's arm on the handle from different angles. One of the reasons I held off from the pistol grip was waiting to see how this one would turn out; and the fact that it looks too low to be comfortable to grab to my eye. Now this one looks too high. This might be an illusion, but it is hard to establish this without an arm/hand grabbing the stick.

Of course, colored version, a plain black would fit in much better, but I know this is a prototype.

[elcobra44]

I'd like to see something a little closer to that Pistol Grip shifter look you guys made..

This says BT to me more than those other ones...

http://www.chargerforums.com/forums/attachment.php?attachmentid=22166&stc=1&d=1184730288

As far as the stalk, half the height would be ideal!

[Nomad^Phoenix]

As far as the stalk, half the height would be ideal!
So you're seeing it, too?

[elcobra44]

Yeah, it's way too tall..

As far as the handle, I just want to be able to grab that sucker and feel it in my hand like the pistol grip shifter, just horizontally..

It definitely needs a spot for the heel of my thumb..

http://www.chargerforums.com/forums/attachment.php?attachmentid=22170&stc=1&d=1184732692

[elcobra44]

Short shaft, big difference...
http://www.chargerforums.com/forums/attachment.php?attachmentid=22171&stc=1&d=1184733260

Right Shaft..
http://www.chargerforums.com/forums/attachment.php?attachmentid=22172&stc=1&d=1184733273

[drivingintowallz]

Looks weird with the tapered shaft. Otherwise I like it.

[elcobra44]

If there's any other ideas I can help visualize, please let me know..

[Nomad^Phoenix]

I'm with you on that place for a thumb, El. Just seems odd without one. I mean the old Hurst's didn't have them, but that's a different era, different product. This has a more solid feeling being one piece.

[mywhitecharger]

I would love one that sits pretty high.

I really like the T handle. I think I'd want some engraving on it also.

[BilletTechnology]

Guys, now this is the type of feedback we like to see. We hear you on the thumb insert also. Great photoshop job there. Definite will look closely at that. The thumb insert we originally did I will post a picture in a sec. Also we have several different type of shafts. I will also post those pics. We would like to narrow it down to one universal shaft if we can.

[OSUthunder]

i know it might be cheaper to make ONE type of shaft but wouldn't offering 2 or 3 types just make it that much more special to everyone? just a little more custom.

I also like the idea of a shorter, straight shaft too, with no taper......wish my home pc haddnt just crashed or I would mock something up.

the thumb side grove el cobra made is great, but I still think it should have the thumb knuckle cutout/groove on the bottom side to just make feel like butter.

If you havnt already, go to the toy store pick up some playdough, make a cylinder and squeeze it like you would hold the shifter. pay attention to where the thumb and the palm part squeeze in in the dough. I think making it more S shaped like elcobra has would not only make it look unique but super comfortable.

as for the height thing, didnt you say that it would be adjustable?

[mywhitecharger]

Do I smell a GB?

[BilletTechnology]

i know it might be cheaper to make ONE type of shaft but wouldn't offering 2 or 3 types just make it that much more special to everyone? just a little more custom.

I also like the idea of a shorter, straight shaft too, with no taper......wish my home pc haddnt just crashed or I would mock something up.

the thumb side grove el cobra made is great, but I still think it should have the thumb knuckle cutout/groove on the bottom side to just make feel like butter.

If you havnt already, go to the toy store pick up some playdough, make a cylinder and squeeze it like you would hold the shifter. pay attention to where the thumb and the palm part squeeze in in the dough. I think making it more S shaped like elcobra has would not only make it look unique but super comfortable.

as for the height thing, didnt you say that it would be adjustable?

Yes, we keep modeling clay here all the time. Here are some shaft pic's for you guys and some pics with a person sitting in the car. We agree about the shaft height and will do something about this.

Sometimes we forget that its no me only driving the car, therefore the current height was perfect to me. Everything will be adjusted. Let us know what you think of these style of shafts.

Agree with the thumb rest, we just machined our first prototype in the wrong place (did it direct on the side not underneath).

[mywhitecharger]

Looks great - I can't wait to see what it looks like up a little bit.

[OSUthunder]

wow looks amazing, yeah i would like it a scosh higher than you currently have it, not as high as the hand in the 2nd pic but somewhere in between.

glad to hear about the thumb notch =) all the angles will make this thing look AMAZING! with as many people as come look at my car, im sure ill sell a few of these for ya no problem ;)

I think the 4th stalk is interesting, would love to see it with the handle on it. i think this could be the winner for me. but i def like the first one, just a bit shortened.

(personally i find modeling clay a bit hard usually, unless your carving it, that FLOAM crap they used to make was hand down the best cause you could squeeze it just right. It would compact and not squish out and stay that way.)

[Nomad^Phoenix]

Let us know what you think of these style of shafts.

Agree with the thumb rest, we just machined our first prototype in the wrong place (did it direct on the side not underneath).

Great! As far as the shafts are concerned, I'm digging the fourth, second and first in that order. Not feeling number three. The first would be better polished and might even bump up in the rankings with handle attached. Have to see it. Really want to see the thumb space.

[SublimeInMA]

These all look really cool, I also think going as far away from a Hurst shifter as possible is best. That style worked back in the Old school days, this idea you have here is more modern and better for the style the Charger is now as well as other LX rides. I also agree that the shaft should be taller but not so tall that your arm would go straight across off the console cover. GREAT WORK AS ALWAYS!!!

Tom

[mywhitecharger]

These all look really cool, I also think going as far away from a Hurst shifter as possible is best. That style worked back in the Old school days, this idea you have here is more modern and better for the style the Charger is now as well as other LX rides. I also agree that the shaft should be taller but not so tall that your arm would go straight across off the console cover. GREAT WORK AS ALWAYS!!!

Tom

See and I think that's the height I'd want it.

It would be cool if there would be some type of insert you can put in there to adjust the height of it. I'm sure that wouldn't be too difficult.

[OSUthunder]

Yeah this is a tough personal preference to build for. I have my seats back further than they do in the pic, which would make it uncomfortable to keep my hand on the shifter in the pics position. I would have to bend my wrist down over the end of the console.

if they are fully adjustable like they says i think everyone will be happy.

[redsrt]

How about making just a solid billet round one?

[mywhitecharger]

How about making just a solid billet round one?

Check their website. They've got quite a bit and reasonably priced also.

[snatchss454]

It would be cool to have an indent(like a U shape)on the end so you could put a nitrous button in there or just rest your thumb. Im still on the fence with this one, kinda reminds me of a golf putter. Ill wait for a more finished version.

[BilletTechnology]

I'm going to go out and take some pictures of one of the prototype handles on the different shafts. Again, we are going to thicken that handle up a bit with the thumb rest underneath.

[BilletTechnology]

It would be cool to have an indent(like a U shape)on the end so you could put a nitrous button in there or just rest your thumb. Im still on the fence with this one, kinda reminds me of a golf putter. Ill wait for a more finished version.


LOL, hang tight while I get some pic's the one handle has the indent on the side

[infernocharger07]

photoshop of what Pistol Grip + T handle =

[HKLEVI]

Yes, we keep modeling clay here all the time. Here are some shaft pic's for you guys and some pics with a person sitting in the car. We agree about the shaft height and will do something about this.

Sometimes we forget that its no me only driving the car, therefore the current height was perfect to me. Everything will be adjusted. Let us know what you think of these style of shafts.

Agree with the thumb rest, we just machined our first prototype in the wrong place (did it direct on the side not underneath).

I think from the pics I may be one to like it a bit lower. I'm pretty happy with the stock shifter hight as I like being able to rest my arm on the console and drape/rest my hand on the shifter as I drive. As far as the design, There are so many good inputs so far that I think I'll wait to see what round II entails.

Great! As far as the shafts are concerned, I'm digging the fourth, second and first in that order. Not feeling number three. The first would be better polished and might even bump up in the rankings with handle attached. Have to see it. Really want to see the thumb space.

X2^

[infernocharger07]

photoshop of what Pistol Grip + T handle =

Sorry for borrowing images without permission, but I just had to show.

[BilletTechnology]

guys sorry for the blurr on the pic's but here it the handle on the different shafts. Notice the thumb indent on the side (in the wrong place)

We still need to have the shift on some of these to come down just a tad bit more to cover up the primay OEM piece.

[BilletTechnology]

Sorry for borrowing images without permission, but I just had to show.


no worries. This is why we post these thread so we can take feedback. We listen.

[BilletTechnology]

I'll get some better pic's tomorrow when the light is better outside and this time I'll use the tripod

[OSUthunder]

looking good, cant tell how good the thumb notch is from those pics but if its like the pistol grip it will feel great.

im still for rounding up the back some and possible making it have a bit more of a swoop/s shape to it on the back side.

im all for the stalk with the cut out! looks great!

[elcobra44]

Notice the thumb indent on the side (in the wrong place)
I'd like to wrap my hand around it like a bicycle handle and not like trying to spark a lighter sideways..

[Nomad^Phoenix]

no worries. This is why we post these thread so we can take feedback. We listen.

Good, because this comp is exactly what you need. While the comp is created by photos that fit into this one view and I'd like to see more at other angles for examples, he has done a magnificent but simple job of showing the difference between the T's you've been working on and the Pistol.

What's wrong with the T's is that they are not organic looking, for lack of a better word. They look stiff and manufactured; like they don't belong in the console. The Pistol looks good the way it was made mind you. It looks perhaps even better on its side and mounted (with a better stalk). It looks mean. It looks hungry. The T's look functional, but not exciting. Which is okay, but not inspiring. You want people to see this and go, HOLY $%#@$@!!

Mind you, you might want to adjust something here or there, but overall...it's hard to mess with perfection. Put the right stalk on this, get that powder coating back in place, as well as chromes...you've got a hit.

[OSUthunder]

http://a931.ac-images.myspacecdn.com/images01/88/l_b63fd670cc064b72ae2c4fb8959ab4e2.jpg

this shape is how i see it being the most comfortable and def stand out. I still say make the back side round and not angular, make the front angular, just like our chargers, bringing the old school into the new school.

[mywhitecharger]

Any ball park on price yet?

[SublimeInMA]

Any ball park on price yet?

You have to be nice to your inlaws for 6 months then they send you one



ROFLMAO!!!!

[Bones1274]

The shaft portion screws into place snug and tight; the handle portion clips and locks down in place. You will be able to adjust your T-Handle portion left or right however it suit you.

This would be a great feature. I would like to be able to swing my wrist to the right towards the passenger 15-20 degrees. I think it would feel more natural that way instead of straight ahead.

The thumb rest on the side is a definate must. The only way I can think to describe it would be to hold a roll of quarters in the fist of your hand. Your thumb naturally goes to the side of the roll so maybe an inverted groove that runs the length of the side of the shifter from front to back that your whole thumb could sink/slide into. I think this would also help you grip the shifter better if you were upshifting or downshifting quickly without worrying about a sweaty thumb sliding off the shifter in a quick need for speed.:grin:

[mywhitecharger]

You have to be nice to your inlaws for 6 months then they send you one



ROFLMAO!!!!

I'll never get one at that rate.:o :o

[OSUthunder]

any updates on this? how bout the shift bezel?

[BilletTechnology]

any updates on this? how bout the shift bezel?

Yes, we are reworking a handle for you all to view shortly. A nice post on the bezel insert will be ready to go in another day or two. I'll have the guys take a satin bezel and put it on the Charger this afternoon.

[BilletTechnology]

Ok guys it has been raining here again, and I will get pictures in the car. Here is the final handle

http://i84.photobucket.com/albums/k19/newtie31/finalgrip3.jpg

http://i84.photobucket.com/albums/k19/newtie31/finalgrip2.jpg

http://i84.photobucket.com/albums/k19/newtie31/finalgrip1.jpg

[BilletTechnology]

You will be able to use this handle 4 different ways.

1. a straight horizontal handle on a short shaft.
2. a straight horizontal handle on a long shaft.
3. a 15 degree tipped handle on a short shaft.
4. a 15 degree tipped handle on a long shaft.

Our plan is to sell this as a kit with either the tall shaft or the short shaft, or you can buy both tall and short together. You will get the universal grip, meaning you will be able to lock it into the straight position or into the 15 degree tilt.

[OSUthunder]

HELL F'N YEAH!!!
i love you billet tech!!! that thing is sick! i love how you took all our sugestions =) you can really see em all in there.

one question though, by 15 degree tip is that the angle the hole is drilled at in the handle? or will this be a shaft angle?

[BilletTechnology]

HELL F'N YEAH!!!
i love you billet tech!!! that thing is sick! i love how you took all our sugestions =) you can really see em all in there.

one question though, by 15 degree tip is that the angle the hole is drilled at in the handle? or will this be a shaft angle?


This is how it should be listening to your customer base.

Right now we have two handles one is machined with the 15 degree tilt in it the other is for straight. The boys are running off a grip right now with the threads built in universal. I'm waiting for it to come off the mill here shortly. In the meantime, the rain let up a bit so here are some more shots in the car.

[http://i84.photobucket.com/albums/k19/newtie31/thandleshort1.jpg

http://i84.photobucket.com/albums/k19/newtie31/thandleshort2.jpg

http://i84.photobucket.com/albums/k19/newtie31/thandleshor3.jpg

http://i84.photobucket.com/albums/k19/newtie31/thandlelong3.jpg

http://i84.photobucket.com/albums/k19/newtie31/thandlelong2.jpg

http://i84.photobucket.com/albums/k19/newtie31/driverspositionshortthrow.jpg

[cofo]

Where do I buy the piece thats at the base, with the R/T engraved on it...That goes over where the "D", "N" etc are....i dont even know what to call it....but at the base of the shifter...someone help me out here!
http://www.chargerforums.com/forums/attachment.php?attachmentid=22138&d=1184718908

[BilletTechnology]

notice the bezel insert ;) I will have a big post on that Monday guys. Thanks for being patient with us

[BilletTechnology]

Where do I buy the piece thats at the base, with the R/T engraved on it...That goes over where the "D", "N" etc are....i dont even know what to call it....but at the base of the shifter...someone help me out here!
http://www.chargerforums.com/forums/attachment.php?attachmentid=22138&d=1184718908

coming soon. will be posting lots of info on Monday for you guys. Notice the red one in Ken's Maggie today

[OSUthunder]

WOW you guys really are gunning for my paycheck next week huh =)

are there gonna be other options for the shaft? a low angle pic would be nice to see it from the side.

thanks!

[cofo]

coming soon. will be posting lots of info on Monday for you guys. Notice the red one in Ken's Maggie today

OOooh so its not even out yet!! Looks SHARP!

*cofo dreams of a anodized black one*

mmmmmmm mmmm

[mywhitecharger]

Stupid work blocks the pictures.

[BilletTechnology]

some more shots

http://i84.photobucket.com/albums/k19/newtie31/grippingthlonghandle.jpg

http://i84.photobucket.com/albums/k19/newtie31/longhandlefront2.jpg

http://i84.photobucket.com/albums/k19/newtie31/longhandleinthephotostudio2.jpg

http://i84.photobucket.com/albums/k19/newtie31/longhandleinthephotostudio.jpg

[BilletTechnology]

folks this is yet another piece, and again I say this with all respect to you guys, you must see the piece in the car to fully appreciate the feel of it and how awesome it looks in there.

This is a yet another high quality piece from the awesome people I work with partnering with you all here to give you hopefully, the T-Handle you have been wanting.

Options, and prices early next week. We will have these with us at the ShinDig next week in Georgia as well. This will without question be the best T-Handle and modular system on the market today for our LX rides :)

[elcobra44]

Is that are short as they'll get?

[mywhitecharger]

Any word on a ball park price yet?

[BilletTechnology]

Any word on a ball park price yet?


Early next week I will have some prices up. I know you will be able to get them polished, brushed with clearcoat, black, red and blue. We also will have a brushed black available very similar to the mistake pistol grip color.

Here are a few more pic's in the photo studio today. You can kind of get an idea of the shaft sizes here. I will post up side by sides Monday for you all to take a look at as well. I want to again thank you guys for giving us your feedback and input on this.

http://i84.photobucket.com/albums/k19/newtie31/shortshaftinthestudiotilted.jpg

http://i84.photobucket.com/albums/k19/newtie31/longshaftinthestudiostraight.jpg

[OSUthunder]

so is that the only shaft you have finished yet?
http://www.chargerforums.com/forums/attachment.php?attachmentid=22185&d=1184773606

I wouldnt mind seeing a side/low angle shot of B and D....mostly D.... if you have one. are all of these still going to be available?

[a14umbra]

Early next week I will have some prices up. I know you will be able to get them polished, brushed with clearcoat, black, red and blue. We also will have a brushed black available very similar to the mistake pistol grip color.

Here are a few more pic's in the photo studio today. You can kind of get an idea of the shaft sizes here. I will post up side by sides Monday for you all to take a look at as well. I want to again thank you guys for giving us your feedback and input on this.

http://i84.photobucket.com/albums/k19/newtie31/shortshaftinthestudiotilted.jpg

http://i84.photobucket.com/albums/k19/newtie31/longshaftinthestudiostraight.jpg


Without a doubt, the nicest product yet. I'm practically in tears, I love this so much.:love:

[BilletTechnology]

so is that the only shaft you have finished yet?
http://www.chargerforums.com/forums/attachment.php?attachmentid=22185&d=1184773606

I wouldnt mind seeing a side/low angle shot of B and D....mostly D.... if you have one. are all of these still going to be available?


I do believe the boys are doing one other shaft piece also. There is so much preperation going on right now that I am loosing track of what is what sometimes. I will make sure the guys come in here over the weekend to read again on this.

The two we showed today will most definite be available. The weather here today was difficult at best to photo outside.

[OSUthunder]

The two? it looks like they are all just the tapered shaft.... or is one short and one long?

can i call dibs on the D prototype then if its not being offered =)

(oh just thought about it, as per my other questions, when you say 2 is it because the 15 degree tilt is on the shaft and not the handle?)

[Bones1274]

some more shots

http://i84.photobucket.com/albums/k19/newtie31/grippingthlonghandle.jpg




I am assuming this is the longer of the 2 shafts?

If you can do a red one with the long shaft, 15 degree tilt and Charger engraved on the top in classic script, I will be on that like a fat kid on a twinkie!

[BilletTechnology]

The two? it looks like they are all just the tapered shaft.... or is one short and one long?

can i call dibs on the D prototype then if its not being offered =)

(oh just thought about it, as per my other questions, when you say 2 is it because the 15 degree tilt is on the shaft and not the handle?)

On is short and one is longer. Check PM

[BilletTechnology]

I am assuming this is the longer of the 2 shafts?

If you can do a red one with the long shaft, 15 degree tilt and Charger engraved on the top in classic script, I will be on that like a fat kid on a twinkie!

We can do that. You will be able to have it straight or tilted. It is the bomb when it is on the tilt. It looks great and is comfortable. The gribs are bigger for you guys on this also.

[Bones1274]

We can do that. You will be able to have it straight or tilted. It is the bomb when it is on the tilt. It looks great and is comfortable. The gribs are bigger for you guys on this also.

Just let me know when you are ready to start making these. I can't wait......:grin:

[OSUthunder]

bump, how did the photo shoot go?

[mywhitecharger]

bump!!!

I'm excited about this one.

[BilletTechnology]

more pic's soon. the weather has been awful here in the afternoon and I have not been able to get pics. I'm waiting to pickup some colored anodzed ones. It will be on the Charger at the ShinDig, and I will be posting more pic's this weekend. All will be ironed out as soon as we return form the road trip.

[jtw715]

Hey Rocky, watch me pull a shifter outta my hat! (sorry, my nine-year-old son brought it up, it's his fault!):

http://www.internationalhero.co.uk/b/bullwinkle.jpg
http://www.chargerforums.com/forums/attachment.php?attachmentid=22140&d=1184718923

[BilletTechnology]

Hey Rocky, watch me pull a shifter outta my hat! (sorry, my nine-year-old son brought it up, it's his fault!):

http://www.internationalhero.co.uk/b/bullwinkle.jpg
http://www.chargerforums.com/forums/attachment.php?attachmentid=22140&d=1184718923



Now that is funny. LMAO. A good way to end the day :lol:

[Nomad^Phoenix]

I do believe the boys are doing one other shaft piece also. There is so much preperation going on right now that I am loosing track of what is what sometimes. I will make sure the guys come in here over the weekend to read again on this.

The two we showed today will most definite be available. The weather here today was difficult at best to photo outside.

Yes, I would love to see some other shafts than the tapered one. If you do not make any others, and I see that someone has asked for the "D" demo, may I reserve "B"? Just in case? I'm salivating at the thought of this combo in black chrome. I'd go with the flat black (mistake version)...but I'm leaning towards black chrome inside the car. Want it to all match, right?

Oh, and BTW, thank you for the great product, and you're welcome for that feedback we've been giving you. It looks a bizillion times better now!

[glennkill]

Since you asked...I do not really like the grip, as it looks like it should be in the Batmobile....I was hoping for something a little closer to what a Hurst T-Handle looks like, more rounded edges and smooth finish/fit..

[mywhitecharger]

Any update on price or date on this?

[425hp]

Might want to make a shaft and handle with a button and room for wires for a nitrous setup. Also, is there any way to make the handle adjustable instead of having to have so many different angled parts? It might be easier??? Is there a way to make it turn up vertically? I was thinking I wanted more of a verticle grip, but one that could be adjusted to work either way would be so much better. Just throwing out ideas.

C.

[mywhitecharger]

The suspense is killing me here.

[BilletTechnology]

putting T-Handle and posts up and on the site by Monday. Anyone here who was at the ShinDig please post your pictures.

[BilletTechnology]

we took a few to the ShinDig and sold the ones we brought. Wanted the focus group and those that bought were very happy.

[mcvargas]

Since you asked...I do not really like the grip, as it looks like it should be in the Batmobile....I was hoping for something a little closer to what a Hurst T-Handle looks like, more rounded edges and smooth finish/fit..

Yeah, every time I look at it it reminds me of Batman. But just because I don't like it doesn't me others won't like it. P Diddy got famous some how.

[BilletTechnology]

Yeah, every time I look at it it reminds me of Batman. But just because I don't like it doesn't me others won't like it. P Diddy got famous some how.

Yes, not everything we do is going to appeal to everyone. :) LOL on Diddy.

We are trying to bring old school and new school together.

[ducvw2004]

Yes, I know, not a very good pic, but it shows off not only the new T-handle shifter, but also the shift bezel plate and polished knobs.

http://i161.photobucket.com/albums/t203/ducvw2004/Shindig/ShindigPIx_078.jpg

BTW, I love the shifter. I went with the short shaft and it fits perfectly, even with the added padding in my console cover.

[BilletTechnology]

^^

Thank you for posting your T-handle pics :)

[BilletTechnology]

Ok the T-Handle will be on our site tomorrow.

We will be offering them this way:

Straight short shaft : $99.00 polished
Straight long shaft: $106.00 polished

Long shaft angled 20 degrees: $114.00 polished
Short shaft angled 20 degrees : $109 polished.

Brushed old school look then clear anodzied add $20
Anodized to color, red, black, blue, dark purple or Grinner Purple (light lavender) add $20.

For those wanting to purchase the handle with both long shaft and short shaft you will be able to add either or for $15 extra, so say for instance you want to purchase a short sahft angled shifter polished for $109 you will be able to add the long shaft for $15.

Originally we planned on having a double drilled T-Handle so that you could position it straight or at the 20 degree angle.

To effectively secure the handle in either of the 2 configuartions (straight or angled) would have required 2 seperate holes so each one would be a little off center. We did not believe this would look too bad, but it would feel uncomfortable to your hand. In addition to being able to feel the unused hole and counter bore bore the finger groove would tend to drive your fingers into the shaft making for an extremely uncomfortable grip. The is the reason we are not offering a double drilled T-Handle shifter.

I'm heading out to the Charger right now to grab some pictures of the Straigh long shaft.

[BilletTechnology]

you also will be able to choose the finish of your shaft, so say for instance you would like a black shifter and a polished shaft or a black shifter and a red shaft.

I will be spending a good amount of time on this when I add it to the site so it is clear. If you have any questions, please do not hesitate to call us and we can help.

[BilletTechnology]

pictures on the BT Charger. Black handle, polished long shaft, straight position.

http://i84.photobucket.com/albums/k19/newtie31/thandlestraightloingshaft3.jpg

http://i84.photobucket.com/albums/k19/newtie31/thandlestraightlingshaftblack2.jpg

http://i84.photobucket.com/albums/k19/newtie31/thandlestraighlongshaftblack1.jpg

http://i84.photobucket.com/albums/k19/newtie31/thandlestraightlonghandle6.jpg

http://i84.photobucket.com/albums/k19/newtie31/thandlestraightlonghandle5.jpg

http://i84.photobucket.com/albums/k19/newtie31/thandlestraightlongshaft4.jpg

Its very hard to capture with a picture, how nice the handle goes in the car.

[a14umbra]

pictures on the BT Charger. Black handle, polished long shaft, straight position.


Its very hard to capture with a picture, how nice the handle goes in the car.

No it's not. That looks awesome!!!!!

[OSUthunder]

*speachless*

Im tempted to jump on a plane down to florida, just so I can hug you guys.

The day I get my package, You will have PLENTY of great pics you're free to use =)

[Bones1274]

Heidi,
A while back you said that it would be possible to do custom engraving on the top of the shifter. How much would that add to the total?
Thanks!

[BilletTechnology]

Heidi,
A while back you said that it would be possible to do custom engraving on the top of the shifter. How much would that add to the total?
Thanks!

PM being sent.

[BilletTechnology]

*speachless*

Im tempted to jump on a plane down to florida, just so I can hug you guys.

The day I get my package, You will have PLENTY of great pics you're free to use =)


Come on down. We love having customers come in and hang with us.

[DarthCharger]

Don't see much use for a shifter of this type becasue LX-platforms are autos. Now if they had a manual six-speed, the shifter would be very useful.

[Aremel]

I looked for ordering information on your web site and don't see the t-shifters there. Help?

[OSUthunder]

im pretty sure heidi said somewhere that shes still working on the site update... id venture to guess that they got a bit messed up this week with lots of people being out of the office and he whole fedex thing and being swamped with orders.

its hard to be successful ;)

[BilletTechnology]

putting the T-Handle up tonight for sure along with the cruise control. Just redid the font page also. Thanks folks :)

[OSUthunder]

=D

im just itching to get my hands on my new stuff, glad to hear you guys are getting this stuff all processed.

[Aremel]

I really like this T handle shifter. I think I like the shorty version more than the long handle but I'm not sure. I'm also not sure about the straight horizontal version or the angled. Can anyone give me an idea of the most natural feel from which combination?

[OSUthunder]

Well it just went on sale last night, i think maybe ONE person has one in their car at this point, wait till next week (I hope) and ill have all kinds of pics and info up about it.