Front hood emblems

[BilletTechnology]

Good day again folks.

We are going to start rolling off some custom front end emblems for the Charger and Magnums.

Here are some samples for The Charger. We plan on black anodizing these then taking the engraves after anodize for the "pop out at ya" look.

Plans are for R/T, SRT, and some Skull and Crossbones, and Grim Reapers. Charger folks give us your feedback is this something you all would be into.

Magnum owners do not worry the BT Maggie will be at the shop Monday and we will be working on that emblem.

These are the prototypes and they will be thinned down a tad bit more also.

Besides black chrome anodzie you will be able to get mirror red, mirror blue, and brite dipped clear anodize on satin. Raw metal will not be offered, as it is important that protective coating be put on these to keep the weather from beating them up.

http://i84.photobucket.com/albums/k19/newtie31/hoodemblem.jpg

http://i84.photobucket.com/albums/k19/newtie31/hoodemblem2.jpg


http://i84.photobucket.com/albums/k19/newtie31/hoodemblem4.jpg

[BilletTechnology]

Engraves on the anodize will look like thishttp://i84.photobucket.com/albums/k19/newtie31/mikesoneoffs.jpg

[BilletTechnology]

Piece install quickly just open your hood and unbolt the factory one, and install ours with the stainless steel screw and nut we provide, you will be able to ditch the cheap plastic one that the factory uses to hold these in place.

[Mecha]

autobot and decepticon symbols :)

[roman371]

If you do a SuperBee one, you may sell about 1000, but probably not more than that:)

[Aremel]

Sweet! I wanna one.

Word of advice - don't drop a wrench down the front of the car! It's a beast to get back out. Only had to learn that once. Now I try a shoe string around the tools so they're easy to get back out.

I tried glueing them to my fingers, but that didn't work out so well.

[NYT]

guys you def have a customer. i will buy one now and wait i want one so badly. haha.

[BilletTechnology]

guys you def have a customer. i will buy one now and wait i want one so badly. haha.

Great good to hear. Looking forward to earning your business and trust.

[sharp charge]

oooooooo, maybe when I order the shift knob. Any word on the interior knobs?

[HISH1]

oooooooo, maybe when I order the shift knob. Any word on the interior knobs?

Let me guess,Krystal said its ok.

[SRT8U]

I saw these being made and Installed today folks and they are sweeeet
Heidi you know I am down for black anodized w/ srt etched.

[Jdub8080]

Oh yeah a old school script charger logo BLACK WITH THE CHROME SCRIPT and i will bite! WHAT IS PRICE AS WELL!

[sharp charge]

Let me guess,Krystal said its ok.
LOL I had an order in before LX Fest, but no she hasn't seen this yet.

[Mecha]

is it possible for custom patterns?

i do want that autobot symbol.

also maybe something with my daytona number in it. not sure what

or
the autobot but with say a 21 drill bit hole where the eyes are so i can run red led bulbs there

[turbobuckeye]

Engraves on the anodize will look like thishttp://i84.photobucket.com/albums/k19/newtie31/mikesoneoffs.jpg

Wow! That is a hot combo in that pic. I can't believe I had not thought of something like that. :drool:

[BilletTechnology]

Wow! That is a hot combo in that pic. I can't believe I had not thought of something like that. :drool:

Yea, DeafCharger wanted a mix and match combo so we hooked him up.

Just give us a call send us PM' or emails for quicker responses at heidivpi@fdn.com and we can hook you up with custom made stuff to your liking. It may take a little longer,but it will be what you want and unique to your tastes.

[BilletTechnology]

is it possible for custom patterns?

i do want that autobot symbol.

also maybe something with my daytona number in it. not sure what

or
the autobot but with say a 21 drill bit hole where the eyes are so i can run red led bulbs there

Yes it is possible. Email us your art or just give Dan a call and he will give you the hook up the way you want it.

[BilletTechnology]

Oh yeah a old school script charger logo BLACK WITH THE CHROME SCRIPT and i will bite! WHAT IS PRICE AS WELL!

Point us the old school script and we will do it for you. This would be a custom one off. We will have prices up early next week. Just need to refine the run times a bit more and good to go. I will say it again with all respect to you fine folks, you will get the best machined product anywhere on the aftermarket today for the best value.

Thank you all again!

[Kenney Hemi]

Real nice! I want one! I would aslo be interested in the script Charger, if you get that worked out with Jdub8080.

[BilletTechnology]

Yes, on the script Charger font, I will look for it also when I return to the office tomorrow as well. Thank you again folks

[BilletTechnology]

I saw these being made and Installed today folks and they are sweeeet
Heidi you know I am down for black anodized w/ srt etched.


Wouldn't have it any other way my friend. I trust Dan took care of you folks Friday and Saturday yes? Sorry I was not able to come out and see you, as I was on a conference call.

[sound&security]

nice-want one! and whats the e.t.a on the pistol shifter?

[Jdub8080]

Sent you a pm with a hood emblem request! Let me know on price Thanks!

[Mecha]

attached is the logos i might light :)

and others

[DeafCharger]

Wow! That is a hot combo in that pic. I can't believe I had not thought of something like that. :drool:

Hey! That's mine! Don't copy my mods! :grin:

Will post some pics after I receive the products from BT.

[turbobuckeye]

Hey! That's mine! Don't copy my mods! :grin:

Will post some pics after I receive the products from BT.

Don't blame me, blame BT for putting together such a hot piece.

You know what they say, imitation . . . . . flattery. :lol:

I will at least use a different color combo (maybe) :silenced:

[Tyrant]

Hey BT, any word on the pricing? would be nice to know what a mirror red (will this be a closer match to the torred paint or inferno red?) emblem with R/T engraving would cost :D.

[BilletTechnology]

Hey BT, any word on the pricing? would be nice to know what a mirror red (will this be a closer match to the torred paint or inferno red?) emblem with R/T engraving would cost :D.

Prices will be ready this week. Do not do mirror red with the torred. It will clash. Better to do black chrome.

[BilletTechnology]

Don't blame, blame BT for putting together such a hot piece.

You know what they say, imitation . . . . . flattery. :lol:

I will at least use a different color combo (maybe) :silenced:

Ha, Ha. The color combo was all Mikes idea. He contacted me thru email and asked to have this done this way. Again, if you want a custom color quote on anything under the hood or inside mix and match just give us a call or email.

[Tyrant]

Prices will be ready this week. Do not do mirror red with the torred. It will clash. Better to do black chrome.
hmm was going for kind of a stealth badge, but hey contrasting colors doesnt hurt either :)..
Another question do you do international orders?

Anyways will be waiting on the prices and see where we go from there :D.

[mywhitecharger]

Can someone post pics I can see at work?

[turbobuckeye]

Prices will be ready this week. Do not do mirror red with the torred. It will clash. Better to do black chrome.

That is good to know. I almost made that mistake.

[BilletTechnology]

hmm was going for kind of a stealth badge, but hey contrasting colors doesnt hurt either :)..
Another question do you do international orders?

Anyways will be waiting on the prices and see where we go from there :D.


Yes, we will ship to you anywhere in the world

[NYT]

any news on pricing? lol, im about to order no matter the cost though heidi.

[Aremel]

Glad to meet you Heidi. Definitely interested in this and some other products. I'm trying to visualize in my head what will look good with the Black Crystal Pearl paint and silver trim. Thoughts???

[glennkill]

Yes, we will ship to you anywhere in the world
When, when, when...can we expect pricing and this emblem to be on your website????!!!!! I'm ready to order!!!!! Are you just waiting to see how many people are in before you determine your price...supply vs demand (means higher price)???? :-)

[BilletTechnology]

No, my fellow Lx'er's we always feel that we are giving you the best possible machined product at a fair price.

I'm just waiting to get the numbers from the shop and this item should be ready for sale soon. This was posted to get some feedback to gauge interest and to take suggestions. So yes, it will be a go and no you won't get boned LOL.

We did this with our pistol grip shifter, and you will see the radical difference between the original prototype and the final production piece.
That final piece came about as a direct result of interaction with all forum member across 3 different boards.

One of the first things asked on this was to thin them out and we have done so. I really want to get the blanks back from black chrome anodize and engrave on these so you all can really see the effect.

[NYT]

i love your products heidi. can i just buy now and have it shipped as soon as its produced?

[glennkill]

No, my fellow Lx'er's we always feel that we are giving you the best possible machined product at a fair price.

I'm just waiting to get the numbers from the shop and this item should be ready for sale soon. This was posted to get some feedback to gauge interest and to take suggestions. So yes, it will be a go and no you won't get boned LOL.

We did this with our pistol grip shifter, and you will see the radical difference between the original prototype and the final production piece.
That final piece came about as a direct result of interaction with all forum member across 3 different boards.

One of the first things asked on this was to thin them out and we have done so. I really want to get the blanks back from black chrome anodize and engrave on these so you all can really see the effect.
OK...thanks. BTW..I was just joking/prodding you about waiting to check demand before setting your price. Looking forward to doing business with you...

[Jdub8080]

The waiting is killing me! Ok calm down! Im ready to order when they are ready! :grin:

[Enano]

If you do a SuperBee one, you may sell about 1000, but probably not more than that:)

hyuck hyuck hyuck - good one

[steelwheels]

Good day again folks.

We are going to start rolling off some custom front end emblems for the Charger and Magnums.

Here are some samples for The Charger. We plan on black anodizing these then taking the engraves after anodize for the "pop out at ya" look.

Plans are for R/T, SRT, and some Skull and Crossbones, and Grim Reapers. Charger folks give us your feedback is this something you all would be into.

Magnum owners do not worry the BT Maggie will be at the shop Monday and we will be working on that emblem.

These are the prototypes and they will be thinned down a tad bit more also.

Besides black chrome anodzie you will be able to get mirror red, mirror blue, and brite dipped clear anodize on satin. Raw metal will not be offered, as it is important that protective coating be put on these to keep the weather from beating them up.

http://i84.photobucket.com/albums/k19/newtie31/hoodemblem.jpg

http://i84.photobucket.com/albums/k19/newtie31/hoodemblem2.jpg


http://i84.photobucket.com/albums/k19/newtie31/hoodemblem4.jpg

how would these attach to the car ? I bought a Charger script stick on logo from "Domestickers", and had to destroy the clips that held the stock chrome plastic rams head on. Will your product use any stock parts that are on the car now, or be a bolt on "stand alone " badge ?

[jackiert]

Read post #3.

[steelwheels]

Read post #3.

thanks, I must have skimmed over that post !

[Jdub8080]

So whats the word on these any new info?

[a14umbra]

Like this!


http://www.chargerforums.com/forums/attachment.php?attachmentid=17680&stc=1&d=1176005612

[a14umbra]

http://www.chargerforums.com/forums/attachment.php?attachmentid=17681&stc=1&d=1176006031

[Jdub8080]

very nice!:lol:

[Beetle]

Pure and simple, that's awsome!

[BilletTechnology]

Folks, I do appreciate your great patience on these.

We have blanks coming back from black chrome anodize tomorrow, and we will begin selling these. Other blanks in the colors below should be arriving back in house within the day as well.

They will be offered in either black chrome, mirror blue, and mirror red anodize.

Offered with Standard engraves of R/T or SRT and Skull & Crossbones. The price will be $59.95. You will get a stainless steel stud, washer, lock washer and nut with this to install. No more plastic OEM hardware!

Special engraving will be available, and depending on the complexity of the art the price should stay basically the same!

Will post these up for sale on the website tomorrow, after we have had a chance to engrave some items so you all can see them against an anodized backdrop

[Jdub8080]

oh yeah cant wait i want a black with silver script charger logo cutout!

[steelwheels]

Folks, I do appreciate your great patience on these.

We have blanks coming back from black chrome anodize tomorrow, and we will begin selling these. Other blanks in the colors below should be arriving back in house within the day as well.

They will be offered in either black chrome, mirror blue, and mirror red anodize.

Offered with Standard engraves of R/T or SRT and Skull & Crossbones. The price will be $59.95. You will get a stainless steel stud, washer, lock washer and nut with this to install. No more plastic OEM hardware!

Special engraving will be available, and depending on the complexity of the art the price should stay basically the same!

Will post these up for sale on the website tomorrow, after we have had a chance to engrave some items so you all can see them against an anodized backdrop Ouch ! $60 bucks for a small badge seems a tad high !

[glennkill]

Ouch ! $60 bucks for a small badge seems a tad high !
My thoughts as well...considering that the huge pistol grip they just started selling is only $9 bucks more....I was expecting something in the $30-35 range.
However, I will probably go ahead and get one anyway......

[NYT]

My thoughts as well...considering that the huge pistol grip they just started selling is only $9 bucks more....I was expecting something in the $30-35 range.
However, I will probably go ahead and get one anyway......

you guys are crazy. try to get an oem replacement, it will cost twice as much and be made of the plastic crap ours comes with now. this is a superior product that i no doubt believe will wield a superior fit and finish.

[glennkill]

you guys are crazy. try to get an oem replacement, it will cost twice as much and be made of the plastic crap ours comes with now. this is a superior product that i no doubt believe will wield a superior fit and finish.
I have no doubt about the quality of the emblem, as I have ordered other parts from Billet before. And as I said in my post I will be ordering one anyway.....

[NARC_CHARGER]

Oh yeah a old school script charger logo BLACK WITH THE CHROME SCRIPT and i will bite! WHAT IS PRICE AS WELL!

X2

[NARC_CHARGER]

Like this!


http://www.chargerforums.com/forums/attachment.php?attachmentid=17680&stc=1&d=1176005612

Oh ya black background and silver.

[glennkill]

x2
X3...........

[a14umbra]

Oh ya black background and silver.

http://www.chargerforums.com/forums/attachment.php?attachmentid=17736&stc=1&d=1176160436

[ducvw2004]

Folks, I do appreciate your great patience on these.

We have blanks coming back from black chrome anodize tomorrow, and we will begin selling these. Other blanks in the colors below should be arriving back in house within the day as well.

They will be offered in either black chrome, mirror blue, and mirror red anodize.

Offered with Standard engraves of R/T or SRT and Skull & Crossbones. The price will be $59.95. You will get a stainless steel stud, washer, lock washer and nut with this to install. No more plastic OEM hardware!

Special engraving will be available, and depending on the complexity of the art the price should stay basically the same!

Will post these up for sale on the website tomorrow, after we have had a chance to engrave some items so you all can see them against an anodized backdrop

Do you have a template available, maybe in AutoCad or some other digital format?

[R/T-Qtr]

I like what i see cool emblem and knops

[BilletTechnology]

Do you have a template available, maybe in AutoCad or some other digital format?


When we do custom engraves we bring them in thru autocad (your picture or what ever you want us to do). On real complex art, sometimes the boys have to go in an redraw on some of the tool paths.

Did I answer that question the way you had intended for it to be answered. I'm guessing that you wanted to know how we can receive files??

[BilletTechnology]

X2


With the old school script the price will stay at $59.95.

Folks it is the engraves that are done after anodize that puts the price up a bit more. We must take extreme care so as to not marr the finish when they come back in from anodize.

If you wanted to do something engraved first then anodized you could knock it down to about $30-$40, but you loose the effect or ''Pop" you are going to get when you engrave after the fact. The fuse box covers we did for spring fest and the underhood stuff that DeafCharger had done shows you exactly how this sets it off.

[NARC_CHARGER]

With the old school script the price will stay at $59.95.

Folks it is the engraves that are done after anodize that puts the price up a bit more. We must take extreme care so as to not marr the finish when they come back in from anodize.

If you wanted to do something engraved first then anodized you could knock it down to about $30-$40, but you loose the effect or ''Pop" you are going to get when you engrave after the fact. The fuse box covers we did for spring fest and the underhood stuff that DeafCharger had done shows you exactly how this sets it off.


Now this is what I am talking about. So you are saying for $59.95 you can do this design?
http://www.chargerforums.com/forums/attachment.php?attachmentid=17736&d=1176160436

[NARC_CHARGER]

http://www.chargerforums.com/forums/attachment.php?attachmentid=17736&stc=1&d=1176160436

This is more like it.

[BilletTechnology]

Now this is what I am talking about. So you are saying for $59.95 you can do this design?
http://www.chargerforums.com/forums/attachment.php?attachmentid=17736&d=1176160436


Yes. :)

[Mecha]

http://www.chargerforums.com/forums/attachment.php?attachmentid=17681&stc=1&d=1176006031

thats the ticket :)

[Mecha]

Yes. :)
one please :)

[BilletTechnology]

Folks we will begin taking cuts on these emblems later today and will begin to post pictures within the next day or two. Again, I can't thank you all enough for you patience. We are preparing to travel to the Starved Rock Meet this weekend and have several items we are working to finish up on for customers that will be at that event on Sunday.

Once again many thanks.

[MrMorgan]

We are ... travel(ing) to the Starved Rock Meet this weekend...

Make sure you fill order #1277 before you go. :)

I'll be ordering my hood emblem next week...



Mr Morgan

[ducvw2004]

When we do custom engraves we bring them in thru autocad (your picture or what ever you want us to do). On real complex art, sometimes the boys have to go in an redraw on some of the tool paths.

Did I answer that question the way you had intended for it to be answered. I'm guessing that you wanted to know how we can receive files??

More or less. I was thinking about designing my own badge, but I'm a little too lazy to go out and actually measure mine accurately enough! Just trying to take the easy way out. :grin:
AutoCAD because I'm CAD certified and pretty proficient.

[BilletTechnology]

Make sure you fill order #1277 before you go. :)

I'll be ordering my hood emblem next week...



Mr Morgan

Thank you for your business. Everything will ship early next week. You won't be disappointed. :)

[BilletTechnology]

More or less. I was thinking about designing my own badge, but I'm a little too lazy to go out and actually measure mine accurately enough! Just trying to take the easy way out. :grin:
AutoCAD because I'm CAD certified and pretty proficient.


Cool. Nothing wrong with relaxing a bit LOL :biggrin:

[BilletTechnology]

Hi folks, again, I want to thank you for your great patience on these once again. We will be putting items up for sale by Tuesday on standard engraves, and those folks that have contacted us and submitted art, yes we are proceeding and want to thank you for your business.

First of all here are the blanks in the mirror color anodize. And here is a Superbee that has been engraved for two customers SRTBEE and Freebird. And as an added bonus here is a tranmission cap we engraved with Superbees on them for Free and Bee.

[a14umbra]

They rock!

[NYT]

looks great, cant wait to see and get mine.

[Jdub8080]

TOO HOT would love to see the script logo ones like i sent you! Great looking!!!! GOOD JOB!!! Will order as soon as i can!

[BilletTechnology]

TOO HOT would love to see the script logo ones like i sent you! Great looking!!!! GOOD JOB!!! Will order as soon as i can!


Yes, that is going to be done early next week. I'll post pictures!

[Jdub8080]

Yes, that is going to be done early next week. I'll post pictures!

you rock!

[Correy27]

I am gunna order a decepticon one I already have a decepticon emblem on the front of my car but it doesnt fit like these do! These are sweet!
This is a pic of the one I have now. I am suprised someone hasnt tried to steal it yet <knock on wood>
http://i33.photobucket.com/albums/d61/Correy27/P3300072.jpg
http://i33.photobucket.com/albums/d61/Correy27/P2090017.jpg

[MrMorgan]

Since I'm into horses (which means I'm neither hip, nor cool), I'm going to use a
real, red-eyed Charger for my hood emblem.
http://www.playmorfarm.com/cars/ChargingTheMustang.jpg

("In the wild, the Alpha Male dominates the landscape... especialy mustangs")

[a14umbra]

Of course, then we'll need this.
http://www.chargerforums.com/forums/attachment.php?attachmentid=17923&stc=1&d=1176514080

[SRT8U]

Well I stopped over at BT this afternoon and got the first SRT emblem that came off the press. I think Heidi and Dan are still tweaking it but here is a pic :)
http://www.bmcforums.com/photopost/data/986/medium/hood_003.jpg
http://www.bmcforums.com/photopost/data/986/medium/hood_004.jpg
http://www.bmcforums.com/photopost/data/986/medium/hood_010.jpg

[BilletTechnology]

Its always great to see Kris come by.

Yes, Kris was the test model today LOL. These will be tweaked still on the standard SRT's. The Standard R/T's look awesome, and I will post pictures Monday.

Nick and I left the shop around 9 tonight, and he had just finished cutting some skulls and crossbones, and a was working on a Grim Reaper Head before we had to bag it in so he could get home to rest before the flight to Starved Rock tomorrow. Anyone going to the Starved Rock Event, the boys have brought out some emblems with them so you can take a closer look at some standard offerings.

The SuperBee posted earlier, the boys have brought up a few of those to Starved Rock also so you all can have a close up look at highly detailed cuts

Enjoy the weekend folks, and again thank you.

[BilletTechnology]

I am gunna order a decepticon one I already have a decepticon emblem on the front of my car but it doesnt fit like these do! These are sweet!
This is a pic of the one I have now. I am suprised someone hasnt tried to steal it yet <knock on wood>
http://i33.photobucket.com/albums/d61/Correy27/P3300072.jpg
http://i33.photobucket.com/albums/d61/Correy27/P2090017.jpg


Yes, that is going to look bad a$$ when it is done. The pictures don't do these justice. I'm not saying it to hype it. Several people came by today and just wanted to take the SuperBee's because they looke too cool.

[sharp charge]

OOOOHHHH...... Grim Reaper... If you can get the sickle into it too, that would be Sharp on the Sharp Charge...

[johngaetano]

SRT8U, Your emblem looks great!!! As does the entire car!

[70gt6]

Yes, that is going to be done early next week. I'll post pictures!

Quick question if you do not mind - what are you using for engraving?
The company I work for just bought a Gravograph IS400 and I can play with it. Any experience with this company?

[BilletTechnology]

Quick question if you do not mind - what are you using for engraving?
The company I work for just bought a Gravograph IS400 and I can play with it. Any experience with this company?

We are engraving right on our CNC machines. I have had no experience with that particular machine.

[SRT8U]

SRT8U, Your emblem looks great!!! As does the entire car!

Thanks Man that means alot!

[Mecha]

We are engraving right on our CNC machines. I have had no experience with that particular machine.


are we able to order the autobot logo yet?

[BilletTechnology]

are we able to order the autobot logo yet?

The guys are going to be back from the meet at Starved Rock tomorrow and we will be putting these up for sale at that time after we get some other designs engraved in the morning. We have taken orders for them right now. If you have art that you would like to submit just shoot me an email at either heidivpi@fdn.com or info@billettechnology.com so we can hook you up with a quote.

[roman371]

If you do a small Bee, I will buy one.

http://i7.ebayimg.com/04/i/07/67/a4/35_1.JPG

[Slyde]

The guys are going to be back from the meet at Starved Rock tomorrow and we will be putting these up for sale at that time after we get some other designs engraved in the morning. We have taken orders for them right now. If you have art that you would like to submit just shoot me an email at either heidivpi@fdn.com or info@billettechnology.com so we can hook you up with a quote.


I hope they had a good time at the meet! I'm looking forward to seeing my piece, since the Super Bee and SRT ones look awesome!

[Correy27]

awesome I cant wait to see mine!

[BilletTechnology]

Thank you folks. Yep, the group had an awesome time at Starved Rock; those that attended the meet, I want to thank you all for receiving our folks so warmly and for the awesome feedback.

More engraves will be starting tomorrow. The boys will be back in first thing AM and I will report on progress.

[TALON]

Heidi,

Please put me down for 1 Black Chrome with SRT engraving. Hopefully you can add this to my in house order.

Thanks, Ken

[glennkill]

Any update on the front hood emblems and T-handle shifter availability and pics?

[BilletTechnology]

Any update on the front hood emblems and T-handle shifter availability and pics?

Many emblems were carved up today and the Standard options will be ready for sale on the website later tomorrow night. The guys carved up some skulls and crossbones today, worked on some grim reapers, the old school charger script, cleaned up the SRT and we have the R/T. I' have a picture of the R/T on our Charger now here is a look. Sorry the car is dirty :(

[BilletTechnology]

a few more pictures

[bskylerj]

Those turned out sweet. I can not wait to get mine.

[BilletTechnology]

Any update on the front hood emblems and T-handle shifter availability and pics?


T-handle shifter we will be working on a prototype within the week, and posting pictures for your feedback as we did with our pistol grip. The interaction of all the LX community was vital and important and we will be doing so here as well.

[BilletTechnology]

Those turned out sweet. I can not wait to get mine.

More pic's will be posted tomorrow. The Old School Charger Script came out awesome! These pieces look real nice to on the car. It is another sitaution where pictures can't really tell you how they look, and again I say this with respect to everyone here.

[BilletTechnology]

Heidi,

Please put me down for 1 Black Chrome with SRT engraving. Hopefully you can add this to my in house order.

Thanks, Ken

Done and taken care of thank you!

[bskylerj]

More pic's will be posted tomorrow. The Old School Charger Script came out awesome! These pieces look real nice to on the car. It is another sitaution where pictures can't really tell you how they look, and again I say this with respect to everyone here.

Greta. now I will not be able to sleep.

[jwray76]

T-handle shifter we will be working on a prototype within the week, and posting pictures for your feedback as we did with our pistol grip. The interaction of all the LX community was vital and important and we will be doing so here as well.

Yes, Yes, Yes, I was thinking that a T-handle would be much better than the pistol grip for our cars because of how your arm is positioned due to the arm rest. Can't wait to see it!

[NYT]

domesticker is coming off, eagerly awaiting replacement.

[BilletTechnology]

Yes, Yes, Yes, I was thinking that a T-handle would be much better than the pistol grip for our cars because of how your arm is positioned due to the arm rest. Can't wait to see it!


The pistol grip is adjustable height wise also so you can have a comfortable grip while driving.

[BilletTechnology]

domesticker is coming off, eagerly awaiting replacement.

I'll be hitting you up with a picture probalby tomorrow.

Man that AVI kills me LOL. I LMAO everytime I see your posts. :lol:

[BilletTechnology]

Enjoy your evening folks. I need to wrap up another long day here at the office and head on home. Feel free to email me at heidivpi@fdn.com with any questions.

[steelwheels]

any chance the 60 buck price will be reduced after a long production run ?

[glennkill]

Many emblems were carved up today and the Standard options will be ready for sale on the website later tomorrow night. The guys carved up some skulls and crossbones today, worked on some grim reapers, the old school charger script, cleaned up the SRT and we have the R/T. I' have a picture of the R/T on our Charger now here is a look. Sorry the car is dirty :(
Thanks...any pics of the old-school Charger script emblem?

[Correy27]

man that looks nice do you know when mine will be done? No rush just excited! :)

[NYT]

I'll be hitting you up with a picture probalby tomorrow.

Man that AVI kills me LOL. I LMAO everytime I see your posts. :lol:

great, ill just buy it whenever. you dont really need to wait for my approval.

"thats a lovely accent? new jersey?" you get a lot of guys talking to you like that heidi?

[BilletTechnology]

great, ill just buy it whenever. you dont really need to wait for my approval.

"thats a lovely accent? new jersey?" you get a lot of guys asked talking to you like that heidi?

Yea, I have picked up the "hit me up" lingo. I get it all the time in IM's, PM's and email LOL. Flame away, I like to laugh. :lol:

Gang we have emblems coming off. I just need to grab some pictures of them and start posting, and update the website. I promise you I am working at all hours LOL. I'm still at the office. as I write this

[WEWSRT8]

Done and taken care of thank you!

I would like to order the black and chrome SRT emblem.

[BilletTechnology]

man that looks nice do you know when mine will be done? No rush just excited! :)

I do believe your art traced today. I promise pictures will be posted of everything that we have done on a one off basis so you all can see the work.

We are a small company with many of us wearing lots of hats here. We are moving as quickly as we can without compromising the integrity of the product or the quality. I know sometimes it can be frustrating for you all, as it is for me as well, because literally I wish there were more hours in the day sometimes.

So please if you have something in mind, please do not hesitate to email, call or PM me and we can work with you.

Again, the standards will be R/T, SRT, Skull and Crossbones, Grim Reaper, and Old School Charger Script.

[BilletTechnology]

I would like to order the black and chrome SRT emblem.

The SRT Emblem that SRT8U posted up has been tweaked and changed. I will be posting additional pictures on this. The standard R/T emblem is as shown in previous photos. If you have a SuperBee; we have them.

[Mecha]

The SRT Emblem that SRT8U posted up has been tweaked and changed. I will be posting additional pictures on this. The standard R/T emblem is as shown in previous photos. If you have a SuperBee; we have them.


Can you send me a paypal invoice for the autobot logo on red anodized?

[BilletTechnology]

Can you send me a paypal invoice for the autobot logo on red anodized?

Check PM Please!

[BilletTechnology]

A sneak peak. This has been run for a couple of members

http://i84.photobucket.com/albums/k19/newtie31/AUTOBOT.jpg

[Correy27]

you guys do excellent work they look great!

[jackiert]

A sneak peak. This has been run for a couple of members

http://i84.photobucket.com/albums/k19/newtie31/AUTOBOT.jpg

That does look good. What does that picture represent? I know it's popular, but I think I'm missing something.

[Ruff n Tuff RT]

no more than 30 bucks is cool for that plain o thing

[NYT]

That does look good. What does that picture represent? I know it's popular, but I think I'm missing something.

its a transformers toy logo. back in the 80s they were popular and are making a comeback now with the new movie coming soon.

[a14umbra]

I've got a new avatar!!!

[SRT8U]

no more than 30 bucks is cool for that plain o thing
???

[a14umbra]

its a transformers toy logo. back in the 80s they were popular and are making a comeback now with the new movie coming soon.

They never left. At least with me.

[BilletTechnology]

more posts again hopefully tomorrow (we are working as fast as we can without compromising the product quality). The SRT is being reworked to flow straight across and not up and down as SRT8U kindly posted (Kris come get a new one in a few more days).

Just to remind you; we will be providing the mounting hardware for these so you can ditch the OEM plastic nut and washer. We are giving you stainless steel mounting gear so that these stay put.

[Mecha]

cant wait till it comes to my house :)

[Slyde]

its a transformers toy logo. back in the 80s they were popular and are making a comeback now with the new movie coming soon.

The new movie will never top the original Transformers: The Movie... Orson Welles, Judd Nelson, Casey Kasem, Leonard Nimoy and Robert Stack.. how can you go wrong?

Not to derail the thread, cause I'm still looking forward to seeing my emblem. =]

[jackiert]

more posts again hopefully tomorrow (we are working as fast as we can without compromising the product quality). The SRT is being reworked to flow straight across and not up and down as SRT8U kindly posted (Kris come get a new one in a few more days).

Just to remind you; we will be providing the mounting hardware for these so you can ditch the OEM plastic nut and washer. We are giving you stainless steel mounting gear so that these stay put.

I'm looking forward not only to the art I sent you, but your version of a grim reaper. When can we expect pix of the reaper?

[.22]

I saw the autobot emblem and had to come on over from the caliber forums. How do I get one? Do you know if it will fit where the ram logo is on the back of a caliber?

thanks

[bskylerj]

Do you have any pics of mine?

[Jdub8080]

Would love to see the Charger scrpit one on a pic!!!!!!

[BilletTechnology]

I saw the autobot emblem and had to come on over from the caliber forums. How do I get one? Do you know if it will fit where the ram logo is on the back of a caliber?

thanks

We are going to do a test fit on my mom's Caliber this weekend and give you a good answer on Monday.

[BilletTechnology]

Do you have any pics of mine?

Perhaps this afternoon

[BilletTechnology]

This is what the face of the Grim Reaper is going to look like. The head will be cloaked

[BilletTechnology]

This is what the face of the Grim Reaper is going to look like. The head will be cloaked

This is going to be our skull head. The boys are working on a different Grim.

[NYT]

This is going to be our skull head. The boys are working on a different Grim.

lol, im prob gonna order another one just like that. love the skull.

[Jdub8080]

Wow very nice!

[BilletTechnology]

New SRT this will be a standard offering as will be that skull head. $69.95 for R/T, SRT, Skull Head, and the Grim to come. Also old School Charger Script

[bskylerj]

Perhaps this afternoon

Now that is just plain teasing me.... i would have been better off with you just saying no....:lol:

[BilletTechnology]

Now that is just plain teasing me.... i would have been better off with you just saying no....:lol:

Aw, I don't mean it LOL. You know I am as excited about this stuff as you guys are. You should see me run out to the shop and bug the boys to get me more stuff LOL. Can't rush quality. The guys really care about what you get.

[SublimeInMA]

What about a Ram head skull for the Reaper?

[bskylerj]

Aw, I don't mean it LOL. You know I am as excited about this stuff as you guys are. You should see me run out to the shop and bug the boys to get me more stuff LOL. Can't rush quality. The guys really care about what you get.


I know. That is why they would not want me working there. I would be like

Are you done yet? Are you done yet? Are you done yet? Are you done yet?
:grin:

[.22]

We are going to do a test fit on my mom's Caliber this weekend and give you a good answer on Monday.


Thanks! We have CNC's for sheet metal. I wish we would get into a little CNC milling.

[BilletTechnology]

What about a Ram head skull for the Reaper?

We have a couple of cool reapers we are working on for these right now. I do believe there will be a combo of a couple of them combined for this front hood emblem.

[BilletTechnology]

Thanks! We have CNC's for sheet metal. I wish we would get into a little CNC milling.


No worries. I will PM you Monday and give you good info. Yea, shee metal is a whole different animal for sure. Thank you for coming on over and taking interest. :)

[DARKCYDE3000]

I think we should show the Decepticon's some love lol, you get that and I'm DOWN!

[Knarley]

http://members.cox.net/knarley06/Knarley's%20Posts/KnarleyBillet.jpg

[WEWSRT8]

New SRT this will be a standard offering as will be that skull head. $69.95 for R/T, SRT, Skull Head, and the Grim to come. Also old School Charger Script

How soon can I purchase one?

[Correy27]

I think we should show the Decepticon's some love lol, you get that and I'm DOWN!

I ordered a decepticon emblem from them already I am sure they will put up pics when it is done. I have a decepticon on my car now (I put some pics up earlier in this post) but it doesnt fit right like these will. We all know that a black charger would be a decepticon if it was a transformer! :grin:

[jeeplaw]

Ok, where do i order that old school charger script and how much? Shoot me a pm! How long until I get it? :D

[hiDes]

Ok, where do i order that old school charger script and how much? Shoot me a pm! How long until I get it? :D

I'm ordering same. Let me know as well. Thanks.

[.22]

Any news on how it fits a Caliber?

Thanks:grin:

[glennkill]

Have any pics of the old school Charger script emblem been posted yet? I have looked, but can't find one....

[BilletTechnology]

Any news on how it fits a Caliber?

Thanks:grin:


We will be making a slight adjustment so that these will fit the Calibers.

[BilletTechnology]

Have any pics of the old school Charger script emblem been posted yet? I have looked, but can't find one....

getting ready to post them now. We are going to be putting the standards up for sale tonight. R/T, SRT, Old School Charger Script, and the Skull Head.

We are having new blanks anodized again (we have sold out of most colors on the one offs). The wait for shipping may be about 3-5 days.

[glennkill]

getting ready to post them now. We are going to be putting the standards up for sale tonight. R/T, SRT, Old School Charger Script, and the Skull Head.

We are having new blanks anodized again (we have sold out of most colors on the one offs). The wait for shipping may be about 3-5 days.
Thank you...will order one as soon as I can see it. Will they be on your website tonight, or will I need to just PM you for the order?

[BilletTechnology]

Here is the Old School Charger Script as well as a college of the standard offerings. More standard offerings will be available soon. We will be putting these up for sale later tonight. Remember, we supply you with the installation hardware that includes a stainless steel mounting screw, lock washer and nut.

[bskylerj]

Do you have any pics of the one I ordered with both the script and the RT? Thanks

[Jdub8080]

Here is the Old School Charger Script as well as a college of the standard offerings. More standard offerings will be available soon. We will be putting these up for sale later tonight. Remember, we supply you with the installation hardware that includes a stainless steel mounting screw, lock washer and nut.

Very sharp cant wait to see mine!!!

[BilletTechnology]

Do you have any pics of the one I ordered with both the script and the RT? Thanks


Probably will have shots in the next day or so

[Slyde]

Probably will have shots in the next day or so

I'm looking forward to seeing mine as well. Hook it up! =p

[a14umbra]

I'm like a little kid every day when the mailman gets here. (He's probably getting tired of me calling him Mr. Mailman Sir.):D


I can't wait.

[BilletTechnology]

I'm like a little kid every day when the mailman gets here. (He's probably getting tired of me calling him Mr. Mailman Sir.):D


I can't wait.


Your package should arrive via UPS tomorrow!!

[BilletTechnology]

Folks the standard offerings are for sale right now. Delivery will start in about 3-5 days. We are having more blanks anodized right now. We do have some reds, and blues left, but the blacks are all gone. More on the way, and more standard engraves will be on the way as well.

[a14umbra]

Your package should arrive via UPS tomorrow!!

AAaahhhhh!!!!!!!
<breathes into paper bag>




Oh boy, oh boy, oh boy, oh boy, oh boy...

[NYT]

Your package should arrive via UPS tomorrow!!

any word on mine?

[a14umbra]

any word on mine?

I told them to send me yours, and make you wait. :p

[WEWSRT8]

Folks the standard offerings are for sale right now. Delivery will start in about 3-5 days. We are having more blanks anodized right now. We do have some reds, and blues left, but the blacks are all gone. More on the way, and more standard engraves will be on the way as well.

Just placed an order, can't wait to get it.

[BilletTechnology]

any word on mine?

Its on its way. I'll PM you a tracking number. Shipped Friday.

[BilletTechnology]

Just placed an order, can't wait to get it.

Thank you :)

[NYT]

I told them to send me yours, and make you wait. :p

i knew it!!!!!!!!!!!!!!

[NYT]

Its on its way. I'll PM you a tracking number. Shipped Friday.

lol, i knew i should have paid for overnight. im twitching here in anticipation. :ninja:

[TALON]

Your package should arrive via UPS tomorrow!!

Any word on mine?

Thanks Ken

[a14umbra]

lol, i knew i should have paid for overnight. im twitching here in anticipation. :ninja:

paper bag.

[Correy27]

everyone has already asked about thiers so that makes me wanna know the status of mine. Sorry :)

[BilletTechnology]

many more one off's will be run in the next day or so. More blanks are coming back from Black Anodize within the next couple of days.

[.22]

We will be making a slight adjustment so that these will fit the Calibers.


Awesome, Let me know when they are ready. I'll be sure to post pics of it on the Caliber forums along with a link to send you some more business. I don't want to send them to you until I get mine, my own, my precious. :lol:

thanks again

[BilletTechnology]

Awesome, Let me know when they are ready. I'll be sure to post pics of it on the Caliber forums along with a link to send you some more business. I don't want to send them to you until I get mine, my own, my precious. :lol:

thanks again


Will do :)

[a14umbra]

:cry: It didn't come today. :cry:

Where's my paper bag?

[425hp]

Can you make one that says:

426 Hemi

C.

[NYT]

:cry: It didn't come today. :cry:

Where's my paper bag?

i control UPS!!! you aint getting yours before i get mine!!!

[a14umbra]

i control UPS!!! you aint getting yours before i get mine!!!

You bastage!

[BilletTechnology]

LOL ^^

I just looked at the UPS shipping. It says delivery for tomorrow. :)

[BilletTechnology]

Can you make one that says:

426 Hemi

C.


We can do that yes.

[a14umbra]

LOL ^^

I just looked at the UPS shipping. It says delivery for tomorrow. :)

I CAN'T TAKE IT!!!!!!!!!!!!!!!!!!!!!!!!!!!



Okay, yes I can. But it's gonna be raining tomorrow. :(

Oh well, pics as soon as the weather cooperates.

[BilletTechnology]

Good morning all:

We have additional blanks for black chrome out to anodize right now ET on them being back in house is late Friday or Saturday morning. We will then begin to engrave on the on off's that are on order so we can get them out the door and to you. Thank you all.

[.22]

So should I place my order now? I don't mind paying for it now and waiting, that way I know I'll get one as soon as the caliber fit issue are taken care of.

[a14umbra]

I got it!!!!!! It's absolutely true the photos do not do it justice.

Here's some I took before putting it on. Hopefully there will be a break in the rain tomorrow and I'll get pics of it on the car.

http://www.chargerforums.com/forums/attachment.php?attachmentid=18481&stc=1&d=1177542419

[TALON]

Those look GREAT, can't wait to receive mine.

[Mecha]

I got it!!!!!! It's absolutely true the photos do not do it justice.

Here's some I took before putting it on. Hopefully there will be a break in the rain tomorrow and I'll get pics of it on the car.

http://www.chargerforums.com/forums/attachment.php?attachmentid=18481&stc=1&d=1177542419

sorry bud beat ya to the install :)

http://people.delphiforums.com/damecha/charger/000_0038.jpg

http://people.delphiforums.com/damecha/charger/000_0039.jpg

http://people.delphiforums.com/damecha/charger/000_0040.jpg

[a14umbra]

Oh, don't be mistakened. It was installed before I posted the pics. It's raining, so I couldn't take pics of it on the car.

[Mecha]

uh huh ;)
beat ya to the post then LMAO.

[a14umbra]

uh huh ;)
beat ya to the post then LMAO.

My wife thinks I'm nuts. There I was, in the rain, feeling sick, installing a hood emblem.

She doesn't understand priorities sometimes.

[Mecha]

no kidding.

[BilletTechnology]

thank you guys for those posts. I love that on the Sublime :)

[BilletTechnology]

Here is the emblem on our Charger :)

http://i84.photobucket.com/albums/k19/newtie31/lordvader.jpg

[RedAlert]

I love it! :)

[Stretch]

Here is the emblem on our Charger :)

http://i84.photobucket.com/albums/k19/newtie31/lordvader.jpg

So Heidi... is that "Hubby" in his new skiing helmet? Lol!

[NYT]

omg!!!!!!!!!!! looks great!!!

im sitting here wigging out trying to wait till friday. damn ups, damn california, damn time zones, damn me not getting overnight delivery!!!

[BilletTechnology]

So Heidi... is that "Hubby" in his new skiing helmet? Lol!

LMAO Andrew. You know in all seriousness he does wear a helmet when he ski's and rides. Hey the great news is that in a couple of more weeks he is going to be able to go back to work on light duty (customer counter). He started his rehab this week.

[XXL HEMI]

That Star Wars emblem is awesome ! ! ! ! ! !

[Slyde]

Now I'm really curious how my Star Wars emblem turned out :D

[.22]

Those emblems look great! Top quality work!

[a14umbra]

omg!!!!!!!!!!! looks great!!!

im sitting here wigging out trying to wait till friday. damn ups, damn california, damn time zones, damn me not getting overnight delivery!!!

Hey Steve,
Did I mention that I have mine? :eek:

[NYT]

Hey Steve,
Did I mention that I have mine? :eek:

lol, sure....rub it in. just remember that little thing called karma!!!!!!!! :zombie:

[BilletTechnology]

Good evening folks. We have taken many orders on these and lots of one off's from folks as well. Even before we started selling them, we ran out of the black chromed blanks. We machined off plenty more and they are currently getting plated right now. We will have them back in house late Saturday afternoon, and will begin shipping the rest of the one off's that have not gone as well as the current standard offering orders starting early next week.

We also will be offering the rear badge as well. We have machined many blanks of those also (a few of you all already order a rear emblem) and they also are going for plating by Monday. We be offering several styles for the rear emblem as well. Within the next few days we will be posting up our standard grim reaper head for these also. Thank you folks again for the strong response on these emblems. I must admit we have been caught off guard with how you folks would receive these and I sincerely want to thank you for your great response to these.

[Mecha]

Good evening folks. We have taken many orders on these and lots of one off's from folks as well. Even before we started selling them, we ran out of the black chromed blanks. We machined off plenty more and they are currently getting plated right now. We will have them back in house late Saturday afternoon, and will begin shipping the rest of the one off's that have not gone as well as the current standard offering orders starting early next week.

We also will be offering the rear badge as well. We have machined many blanks of those also (a few of you all already order a rear emblem) and they also are going for plating by Monday. We be offering several styles for the rear emblem as well. Within the next few days we will be posting up our standard grim reaper head for these also. Thank you folks again for the strong response on these emblems. I must admit we have been caught off guard with how you folks would receive these and I sincerely want to thank you for your great response to these.

ok sign me up for the rear one too. same transbot autobot logo on black

[BilletTechnology]

ok sign me up for the rear one too. same transbot autobot logo on black

I'll put a work order in tomorrow for you. Same price as the front one :)

[Mecha]

I'll put a work order in tomorrow for you. Same price as the front one :)

cool give me a call tomarrow and i will pay ya or shoot me a paypal statement. whichever.

think i can get it before the 12th of may?
i leave texas for parts east and hitting the M&G in columbus on the 19th.
also dont forget to give me plenty of busniess cards.
sure folks will ask.

ty
eric

[Major]

What about the Mopar "M" logo?

[BilletTechnology]

cool give me a call tomarrow and i will pay ya or shoot me a paypal statement. whichever.

think i can get it before the 12th of may?
i leave texas for parts east and hitting the M&G in columbus on the 19th.
also dont forget to give me plenty of busniess cards.
sure folks will ask.

ty
eric

Not a worry; this will be done for you. As well as the balance of the one off's yet to be delivered and current back orders.

Cuts are being done on our new blanks on Monday again.

[BilletTechnology]

What about the Mopar "M" logo?


Please check your PM's

[a14umbra]

Guess this will be my next mod.
http://www.chargerforums.com/forums/attachment.php?attachmentid=18561&stc=1&d=1177782033


I've been sick (again :(). Hopefully I'll have pics of the badge on the car tomorrow.

[Jdub8080]

Guess this will be my next mod.
http://www.chargerforums.com/forums/attachment.php?attachmentid=18561&stc=1&d=1177782033


I've been sick (again :(). Hopefully I'll have pics of the badge on the car tomorrow.

sweet!

[Mecha]

Guess this will be my next mod.
http://www.chargerforums.com/forums/attachment.php?attachmentid=18561&stc=1&d=1177782033


I've been sick (again :(). Hopefully I'll have pics of the badge on the car tomorrow.


SWEEET
but it should be a green bot :)

[a14umbra]

SWEEET
but it should be a green bot :)

I wanted him to be fast too.:smoke:

[Mecha]

I wanted him to be fast too.:smoke:

lol its funny i was just thinking last night how the charger would look transformed lol.
maybe we need to get hazman on this.
instead of recycling the old autobot like you did come with a new design lol

on gotta have Halo lights on it lol

[a14umbra]

lol its funny i was just thinking last night how the charger would look transformed lol.
maybe we need to get hazman on this.
instead of recycling the old autobot like you did come with a new design lol

on gotta have Halo lights on it lol

I think I was just talked down to. :smoke:

[Mecha]

no sir not at all.
you used "Jazz" as your autobot charger.
see im an old school Transformer guy :)
i know them lol.

[a14umbra]

no sir not at all.
you used "Jazz" as your autobot charger.
see im an old school Transformer guy :)
i know them lol.

I knew you were just showing off you Autobot knowledge.

BTW, I have a Jazz that I keep at work (so my son won't get to it).

[Mecha]

lol thats funny.
welp off to watch the first transformers movie :)

[a14umbra]

The rain finally stopped and I felt well enough to take a pic.

http://www.chargerforums.com/forums/attachment.php?attachmentid=18615&stc=1&d=1177892324

I will have better pics later.

[glennkill]

Anyone got a picture of the old school Charger script front emblem installed on their car?

[BilletTechnology]

Anyone got a picture of the old school Charger script front emblem installed on their car?


We have sent a couple of red ones out last week. Maybe they will begin showing up soon.

[a14umbra]

Better pics

http://www.chargerforums.com/forums/attachment.php?attachmentid=18666&stc=1&d=1177988042
http://www.chargerforums.com/forums/attachment.php?attachmentid=18667&stc=1&d=1177988112

[NYT]

haha, i picked mine up friday night. will post pics soon.

just gotta say, its the sickest thing ive laid my eyes on in awhile!

everyone has been drooling over it this weekend. will post pics tomorrow.

[.22]

After seeing all these emblems installed I have to ask, any news on the fit for the Caliber?

thanks

[BilletTechnology]

After seeing all these emblems installed I have to ask, any news on the fit for the Caliber?

thanks


the rear badges will be fit fine. The front emblems we are scaling those down to fit in the recess. The fronts for the Calibers will be getting ready to run middle of next week.

[a14umbra]

Better pics
http://www.chargerforums.com/forums/attachment.php?attachmentid=18667&stc=1&d=1177988112

I just notice all of the pollen around it in this pic. Bummer. I didn't realize it was there, or I would have cleaned it first.

[jackiert]

Still waiting patiently for my submission and the reaper.................

[hiDes]

Anyone got a picture of the old school Charger script front emblem installed on their car?


I'm wanting to see that also.

[.22]

Great! How do I order a rear badge for my caliber? I would like it in black.

thanks

[FreebirdSRT]

Yesterday I received a little brown box from BT. Inside was my new BT Super Bee front emblem.

Heidi, Dan and the rest of the BT crew , YOU ROCK. http://www.300cforums.com/forums/images/smilies/new/fing02.gif Like I told you from the beggining, if you make it, they will come. :grin:

http://i41.photobucket.com/albums/e265/MoparMadness/DSC01869.jpg

http://i41.photobucket.com/albums/e265/MoparMadness/DSC01871.jpg

http://i41.photobucket.com/albums/e265/MoparMadness/DSC01873.jpg

http://i41.photobucket.com/albums/e265/MoparMadness/DSC01877.jpg

[BOSChargerRT]

mark - it looks perfect...i can't wait to see mine now...take care - jimmy
i still havn't heard anything from alex...

[FreebirdSRT]

mark - it looks perfect...i can't wait to see mine now...take care - jimmy
i still havn't heard anything from alex...

Thanks Jimmy. The black chrome really helps the engravings to pop out. This emblem is da bomb and it gets rid of that unsightly black plastic and chrome rams head.

Give A&B some time to work out the design, on the spoiler. I guess I need to give them a call.

[a14umbra]

Yesterday I received a little brown box from BT. Inside was my new BT Super Bee front emblem.

Heidi, Dan and the rest of the BT crew , YOU ROCK. http://www.300cforums.com/forums/images/smilies/new/fing02.gif Like I told you from the beggining, if you make it, they will come. :grin:

It's perfect!

[NYT]

here it is in all its glory...or as much as i could gather with my new camera...

i punish da guilty. (if you know who delivered that line, you will get the joke. if not, its cool anyway. ;) )

http://i9.photobucket.com/albums/a96/nytridr/punisher3.jpg

----------------

http://i9.photobucket.com/albums/a96/nytridr/punisher2.jpg

----------------

http://i9.photobucket.com/albums/a96/nytridr/punisher1.jpg

thanks again billet tech!!!

[FreebirdSRT]

here it is in all its glory...or as much as i could gather with my new camera...

i punish da guilty. (if you know who delivered that line, you will get the joke. if not, its cool anyway. ;) ) Your talking about The Punisher. Looks awesome.

http://i9.photobucket.com/albums/a96/nytridr/punisher3.jpg

----------------

http://i9.photobucket.com/albums/a96/nytridr/punisher2.jpg

----------------

http://i9.photobucket.com/albums/a96/nytridr/punisher1.jpg

thanks again billet tech!!!

[BOSChargerRT]

thats sick as well...great job by btech...i can't wait for mine now....later - jimmy

[glennkill]

I want the "TCB" (Takin' Care of Bizness) logo on my emblem..you know..the Lightning Bolt with TCB above it that Elvis made famous....can anyone photoshop this onto an emblem before I make the decision to order one???

[glennkill]

here it is in all its glory...or as much as i could gather with my new camera...

i punish da guilty. (if you know who delivered that line, you will get the joke. if not, its cool anyway. ;) )

http://i9.photobucket.com/albums/a96/nytridr/punisher3.jpg

----------------

http://i9.photobucket.com/albums/a96/nytridr/punisher2.jpg

----------------

http://i9.photobucket.com/albums/a96/nytridr/punisher1.jpg

thanks again billet tech!!!
Dude...you have like a flat "banana-head" in that picture..freaky!!

[pdogg57]

damn those emblems look good. anybody got pics of the script charger emblem intalled?

[NYT]

Dude...you have like a flat "banana-head" in that picture..freaky!!

lol, big feet and a small head...oh damn.

[BilletTechnology]

That Punisher emblem looks awesome; Thanks for posting. Folks we are running more standards and one offs right now, and I will begin posting additional pictures over the next couple of days. Someone asked about the Old School Charger Script in Black on the car, I'll put one on our Charger tomorrow and photo it for you. We also will be introducing some a killer Grim Reaper Standard option in the next day as well.

All remaining on off's will be running and finished over the weekend!

[BilletTechnology]

As you all have so patiently waited, we are running the one off's that were ordered as I write this, as well as filling the standard orders (many shipped today). You may remember some of the posts that were made saying that we planned on bringin you a standard Grim Reaper. I'm pleased to show him off today, and this great little gem will be added to the website for sale later on this evening (after I get caught up LOL)

Because of the higher detail in this awesome piece we have to charge a tad bit more for him, but I do believe it is worth the extra charge. The Grim will sell for $69.95. Those that have received some of our fuse boxes, and one off's, and again I say this with respect to each and everyone of you and your hard earned cash will see that the detail and attention paid to these is worth it.

The very first one rolled off the machine this afternoon and onto the car of a fellow Charger Lx'er, Top Banana owner and board member Mike Stone. Thank you Mike!

We plan on having this Grim themed with a rear emblem Grim also. Enjoy your weekend folks, and again, many thanks.

[BOSChargerRT]

Heidi - that i beautifull....awesome job...any chance you've got the skull and cross bones done...please...i can't wait to see it all in my ride...thanks - jimmy