LEDs Lighting Installed!

[DeafCharger]

Just had installed all 4 interior lights last week. Thanks ZMagnum for give me correct bulbs for both front and rear lights. I ordered Super White 39mm 9 LEDs for front map lights and 194 5 LEDs for rear passenger lights.

39mm Festoon (Map front lights) Link - http://autolumination.com/festoon.htm

194 (Rear passenger lights) Link - http://autolumination.com/194.htm

The pictures don't do justice. Super white is not too bright. It's almost blue but much better than yellowish stock lights. They provide a rather nice bluish glow.

Left is super white & right is stock light.
http://i52.photobucket.com/albums/g24/deafmgecko/Interior/000_0020.jpg

Took a picture with flash. After map light installed....
http://i52.photobucket.com/albums/g24/deafmgecko/Interior/000_0048.jpg

Took a picture below without flash. (Before rear lights installed)
http://i52.photobucket.com/albums/g24/deafmgecko/Interior/frontlights.jpg

Rear passenger lights installed...
http://i52.photobucket.com/albums/g24/deafmgecko/Interior/bothlights.jpg

http://i52.photobucket.com/albums/g24/deafmgecko/Interior/rears.jpg

Tomorrow's (July 18th) new mod - New shifter knob :grin:

EDIT: July 18th mod - http://www.chargerforums.com/forums/showthread.php?t=17732

[Tahde]

Aw yeah.. Night and day difference. Nice job! Looks sweet

[BetoMXL]

damn!... that looks pretty nice!!!

[ChargerGirl]

Yeah, same as mine, but mine's red and much much dimmer. Definitely a U571 thing. ;)

[thebigqballer]

Did you just have to pop the lens covers off to install the bulbs?

[ChargerGirl]

Did you just have to pop the lens covers off to install the bulbs?

Yeah, its probably one of the easiest mods there is.

[SILVER-ES]

I just found my next mod. I've always loved the superwhite lights in the new Cadillacs, now I can finally have something similar in the Charger. Thanks for the information on the bulb sizes.

[pdogg57]

Very cool mod, I can't wait to get mine started. I was thinking about getting illuminated entry guards. Does anyone know if you can change the color from red to superwhite? That would be awesome. Thanks.

[Craigb21]

What do you need 2 of each one? I haven't even looked at the backlights at all.

[Dookie]

Just had installed all 4 interior lights last week. Thanks ZMagnum for give me correct bulbs for both front and rear lights. I ordered Super White 39mm 9 LEDs for front map lights and 194 5 LEDs for rear passenger lights.

39mm Festoon (Map front lights) Link - http://autolumination.com/festoon.htm

194 (Rear passenger lights) Link - http://autolumination.com/194.htm
Thanks for the info, but could you be more specific on bulb choice...looks nice!

[hookg98R/T]

Which bulbs are they exactly on the website ?

[DeafCharger]

Very cool mod, I can't wait to get mine started. I was thinking about getting illuminated entry guards. Does anyone know if you can change the color from red to superwhite? That would be awesome. Thanks.

I have illuminated entry guards. I'm not sure if it can be changed to super white. I didn't look inside of entry guards

[DeafCharger]

What do you need 2 of each one? I haven't even looked at the backlights at all.

Just one bulb of each rear passenger light, so you order 2 for passenger lights.

[DeafCharger]

Thanks for the info, but could you be more specific on bulb choice...looks nice!

As for map front lights, I ordered 39mm - 9 LEDs festoon. Just stroll down and look for 39mm (1 1/2"). $6.99 each. Just pick the color (Blue, Super White, Red, Green, or UV).
Link - http://autolumination.com/festoon.htm

Rear passenger lights, I ordered 194 - 5 LEDs. Look for "194 Matrix Bulbs Emits Light in all Directions". $6.99 each. 6 colors (Blue, Super White, Red, Amber, Green, UV).
Link - http://autolumination.com/194.htm

You need to order 2 front light bulbs and 2 rear passenger light bulbs.

[DeafCharger]

Which bulbs are they exactly on the website ?

See my previous post. :)

[Dookie]

As for map front lights, I ordered 39mm - 9 LEDs festoon. Just stroll down and look for 39mm (1 1/2"). $6.99 each. Just pick the color (Blue, Super White, Red, Green, or UV).
Link - http://autolumination.com/festoon.htm

Rear passenger lights, I ordered 194 - 5 LEDs. Look for "194 Matrix Bulbs Emits Light in all Directions". $6.99 each. 6 colors (Blue, Super White, Red, Amber, Green, UV).
Link - http://autolumination.com/194.htm

You need to order 2 front light bulbs and 2 rear passenger light bulbs.
Thanks! U DA MAN!

[crazylikeacharger]

hey where did you get the leds and what Part #'s after seeing your pics i really wanna do this. thanks guys

[crazylikeacharger]

nevermind see the post now

[crazylikeacharger]

im thinking red for my inferno. but you cant go wrong with white

[RTforUs]

Looks great!
We've been thinking about doing this and now I think I'm ready to order. Thanks for the direct links to the bulbs.

Let us know how the change out of the shifter knob goes. Thought about changing that and the pedals too.....

[DeafCharger]

Oh, one more thing, be careful with stock lights. They are extremely HOT! :devil: Be sure to close all doors and let lights go off. Wait for few minutes and then you can remove them.

[mywhitecharger]

Has anyone replaced the stock reverse lights with LEDs?

[daffin]

Has anyone replaced the stock reverse lights with LEDs?

I actually have some ERD-rated lights sitting on my table at home, waiting to be installed. They aren't LED's though.

http://www.lxforums.com/board/showthread.php?t=33938

[Iguana]

sweet! I'll have to get some of those

[PikeBoy98]

Placing my order now. Sweet mod. I am going with Green....

[DeafCharger]

Placing my order now. Sweet mod. I am going with Green....

Green should be interesting. :grin: Post some pics after installed.

[crazylikeacharger]

i may do like charger girl and go with the red dont know yet. maybe ill get red and white

[hookg98R/T]

Does Festoon have lights for the front mirrors also ? If so ne one which ones they are ?

[Wise]

That's hot.

Does anyone know how I would go about getting the interior ambience like in a 2000 BMW 5 series? It's like an red ambience that shines on the dash and other areas at night.

[ChargerGirl]

The red reflects off all the surfaces, just pretty dim, I might need to redirect the lights.

[ZMagnum]

I've got the exact same LED's in my Magnum (white) from the same vendor. I have had to change all of them out once because they started blinking and burned out. Be careful when starting. Turn off your interior lights first otherwise you risk sending them a surge and burning them out.

[crazylikeacharger]

you really must have gave them a surge because it takes a good ammount to blow them

[ZMagnum]

you really must have gave them a surge because it takes a good ammount to blow them

According to Chris Bacon at Autolumination.com they are pretty easy to burn out. I still have one more that I need to replace one of these days.

[SILVER-ES]

According to Chris Bacon at Autolumination.com they are pretty easy to burn out. I still have one more that I need to replace one of these days.

That sucks, I'm now wondering if I should of ordered extras.

[SILVER-ES]

Ok, so I just installed my superwhite bulbs. I have two questions now. First off, when I went to install mine there was a little metal shield that had to be removed to access the bulbs. I haven't seen anyone mention this in there how-to's. Is it because it's not there for everyone or did you guys just not re-install it? Second, when I push on the map lights the superwhite bulbs are VERY dim yet when I turn them on with the rolling switch they are the normal brightness. Anyone else experience this?

[DaytonaTULSAoklahoma]

How do you change the from lights? How do you get to the bulbs?

[SILVER-ES]

http://s12.photobucket.com/albums/a2...ght%20re-lamp/

[DeafCharger]

http://s12.photobucket.com/albums/a2...ght%20re-lamp/

Correct link - http://s12.photobucket.com/albums/a243/computermeister/Map%20light%20re-lamp/

[SILVER-ES]

Sorry about the wrong link. :(

DeafCharger, since you are the original poster maybe you could give me your .02 on this...

Ok, so I just installed my superwhite bulbs. I have two questions now. First off, when I went to install mine there was a little metal shield that had to be removed to access the bulbs. I haven't seen anyone mention this in there how-to's. Is it because it's not there for everyone or did you guys just not re-install it? Second, when I push on the map lights the superwhite bulbs are VERY dim yet when I turn them on with the rolling switch they are the normal brightness. Anyone else experience this?

Thank you!

[ZMagnum]

Remove the heat shields and do not reinstall them. They are no longer needed and only block your LED lights.

My lights do vary in brightness under different conditions. When driving at night they glow very dimly which is cool because you can see them if you need to switch them on. Sorta like a lighted switch.

I do get full brightness when opening the car doors if I've not purposely rheostated them off to protect them from surges.

BTW, I have the glovebox light mod and have replaced that light with an LED as well. It's the same 194 bulb that the rear passenger lights use.

Ok, so I just installed my superwhite bulbs. I have two questions now. First off, when I went to install mine there was a little metal shield that had to be removed to access the bulbs. I haven't seen anyone mention this in there how-to's. Is it because it's not there for everyone or did you guys just not re-install it? Second, when I push on the map lights the superwhite bulbs are VERY dim yet when I turn them on with the rolling switch they are the normal brightness. Anyone else experience this?

[SILVER-ES]

Thank you very much for the help, off to take out the heat shields now.

[DeafCharger]

Sorry about the wrong link. :(

DeafCharger, since you are the original poster maybe you could give me your .02 on this...



Thank you!

Sorry about questions earlier. Pretty much what ZMagnum said.

I hope you enjoy it!

[Jonesey]

Anyone have any pics of the blue IN the car?

[SilentBill4]

Just did mine tonight and love it! Check it out!

http://i98.photobucket.com/albums/l263/SilentBill4/DSCF0490a.jpg

http://i98.photobucket.com/albums/l263/SilentBill4/DSCF0488a.jpg

http://i98.photobucket.com/albums/l263/SilentBill4/DSCF0485a.jpg

[DeafCharger]

Just did mine tonight and love it! Check it out!

http://i98.photobucket.com/albums/l263/SilentBill4/DSCF0490a.jpg

http://i98.photobucket.com/albums/l263/SilentBill4/DSCF0488a.jpg

http://i98.photobucket.com/albums/l263/SilentBill4/DSCF0485a.jpg

WOW! Looks great! Blue is brighter than I thought it would be.

[HEMILVR]

Does anyone know where to get Orange LED's for us Mango guys? The Amber looks like it won't match very good.

[RTforUs]

Just did mine tonight and love it! Check it out!

http://i98.photobucket.com/albums/l263/SilentBill4/DSCF0490a.jpg


Looks awesome!!

I ordered blue just the other day, now I really can't wait til they get here. I think they are going to look even better than I thought!! :yes:

[SilentBill4]

I think the reason they look so bright is because I didn't put back in the medal heat protector. I'm thinking about putting them back in because it may be too bright for me...I dont know

[HEMILVR]

Orange lights... anyone???

[ZMagnum]

Orange lights... anyone???

I got mine at http://www.autolumination.com. I'm not sure if they have orange lights. AFAIK the only orange LEDs are the reverse polarity red/yellow type when you connect them up to a low voltage AC source (red and yellow makes orange).

[Jonesey]

And is the Blue legal? or does it go like underbody lights in the law enforcement world? only thing thats left for me to consider before ordering blue over super white

[Fix8ed]

I'm really liking that blue. They do look a little bright but what about with heat shields? Anyone have pics of the blue/red post-shields?

[Fix8ed]

Mine will be shipped on Monday (tommorrow). I ordered the blue. Pics coming as soon as I can get these installed.

[pdogg57]

anyone with any other colors? pics?

[elcobra44]

Thanks for posting the info, bud!

I can't wait to get my reds...

[Fix8ed]

Post op:

These guys were extremely fast. I got my lights in 3 days from ordering to my door. They were well packaged and worked without a hitch. Removing those heatshields makes them glow really nice too. I will post pics in about 4 hours when I get home (and when it's darker).

[Biggy-k]

Just installed the blue.Looks great

[elcobra44]

I probably won't receive mine till Monday even though I ordered them yesterday.. :(

[elcobra44]

:cry:

... Maybe Tuesday?

[Sho'Nuff]

Just received mine today. They look good, but I was wondering about the dome lights. I ordered the 39mm but it seems like they are a little short. They work, but would the 44mm be a better fit?

Sho'Nuff

[elcobra44]

Just received mine today. They look good, but I was wondering about the dome lights. I ordered the 39mm but it seems like they are a little short. They work, but would the 44mm be a better fit?

Sho'Nuff
Just keep a fire extinguisher in the trunk.. You'll be fine.

[elcobra44]

Where the $%#! are my lights!? :fuming:

[elcobra44]

Finally.. and well worth the wait.

http://www.chargerforums.com/forums/attachment.php?attachmentid=9985&stc=1&d=1156304229

http://www.chargerforums.com/forums/attachment.php?attachmentid=9727&stc=1&d=1155787624

[Fix8ed]

Finally.. and well worth the wait.

http://www.chargerforums.com/forums/attachment.php?attachmentid=9727&stc=1&d=1155787624

Looks good. The red sets the interioir off.

[elcobra44]

It matches the trunk perfectly.. :)

http://home.comcast.net/~el_cobra/neons.jpg

[phenex36]

Nice I just installed my red LED lights..nice

[Dabeav]

Could you change the color of your turn lamps, I'm guessing this is illegal but I can't find anything for the state of minnesota for any restriction on color (well, I've seen amber, red, and white around here) With some of these LEDs, UV might be cool or blue, but you just might annoy the hell out of people. :p

[ZMagnum]

Just received mine today. They look good, but I was wondering about the dome lights. I ordered the 39mm but it seems like they are a little short. They work, but would the 44mm be a better fit?

Sho'Nuff

I've had the same thoughts. I don't know anyone that has ordered the 44mm though.

[crazylikeacharger]

i have a request for you people that have done this already. can someone please take pics of installation from start to finish or just how to get the coers off so i can get to the bulbs (1 of the front and 1 of the back). my luck ill try popping the covers off the wrong way and break them. thanks.

[peter2772000]

I'm surprised none of you have an issue with the fact that the map lights aren't bright when you hit the corresponding map light button, only when you roll on the cabin light switch. It's the only reason I haven't done this mod.
The lamps burning dimly all the time might get on my nerves...or might just be practical as was stated.

[RTforUs]

I'm surprised none of you have an issue with the fact that the map lights aren't bright when you hit the corresponding map light button, only when you roll on the cabin light switch.
I have not noticed this. I have blue installed and it is very bright when I push the map light button. Same brightness as when the cabin lights are on. Maybe try flipping them around end for end and reinstalling.
And by the way: The Blue is MUCH brighter than I thought it would be, probably because we ordered the one with 9 led's.


i have a request for you people that have done this already. can someone please take pics of installation from start to finish or just how to get the coers off so i can get to the bulbs (1 of the front and 1 of the back). my luck ill try popping the covers off the wrong way and break them. thanks. Check earlier in this thread......
http://www.chargerforums.com/forums/showpost.php?p=286039&postcount=38

[crazylikeacharger]

thanks man good pics. do you have any for the back or is it very similar
????

[crazylikeacharger]

i was lookin at your other albums , what are the numbers you put on the resistors. i was thinkin about doing this cause i had a resistor for my old truck and it worked good when it was warm outside

[joescat]

Oh, one more thing, be careful with stock lights. They are extremely HOT! :devil: Be sure to close all doors and let lights go off. Wait for few minutes and then you can remove them.

You can override that - turn the "dashboard dimmer" all the way down until it clicks, and you can disable the interior lights from coming on with the door open.

[DeafCharger]

You can override that - turn the "dashboard dimmer" all the way down until it clicks, and you can disable the interior lights from coming on with the door open.

Yep! You're right. I forgot about dimmer.

[elcobra44]

I'm surprised none of you have an issue with the fact that the map lights aren't bright when you hit the corresponding map light button, only when you roll on the cabin light switch. It's the only reason I haven't done this mod.
The lamps burning dimly all the time might get on my nerves...or might just be practical as was stated.
I also haven't noticed the brightness problem.. They light up pretty good. I did have to slightly adjust the contacts that hold the bulbs in place.. Maybe some folks aren't getting good enough contact..?

I have noticed they glow slightly when not in use, but it's not enough to really put out much light at all. Only the fronts do this.

I still love uhm..

[phenex36]

Elcobra: yeah you're right they do light up very, very little when not in use but you dont even notice them on unless you look at it. I dont see why that should be problem for anybody not to get them.I love mine and so do a lot of others love theirs.

I also haven't noticed the brightness problem.. They light up pretty good. I did have to slightly adjust the contacts that hold the bulbs in place.. Maybe some folks aren't getting good enough contact..?

I have noticed they glow slightly when not in use, but it's not enough to really put out much light at all. Only the fronts do this.

I still love uhm..

[peter2772000]

Ok, so I just installed my superwhite bulbs. I have two questions now. First off, when I went to install mine there was a little metal shield that had to be removed........
Second, when I push on the map lights the superwhite bulbs are VERY dim yet when I turn them on with the rolling switch they are the normal brightness. Anyone else experience this?

This is the post I read which mentions the issue with dim map lights. I don't believe I saw a follow-up post by him stating he found the problem. So, is it simply because the lamps needed to be swapped end-for-end? Makes lotsa sense, by the way. They are, after all, diodes...

[RTforUs]

I have noticed they glow slightly when not in use, but it's not enough to really put out much light at all. Only the fronts do this.

All four of mine glow slightly. At first I thought something was wrong but...Oh well!! It's kinda cool looking and not even that noticeable unless you look directly at them.

I really, really love the blue light on the black interior at night :yes:
Our friends that have seen these now need my help finding which bulbs to use in their vehicles!

[joescat]

Yep! You're right. I forgot about dimmer.

Yep I did too for a while when I was wiring my radar detector, until those light finally annoyed me enough.

[Fix8ed]

I'm surprised none of you have an issue with the fact that the map lights aren't bright when you hit the corresponding map light button, only when you roll on the cabin light switch. It's the only reason I haven't done this mod.
The lamps burning dimly all the time might get on my nerves...or might just be practical as was stated.

The only one that is dimly burning for me is my rear passenger door LED. It's a faint, soft blue glow. The other 3 are completely off until I turn them on. It's very strange, but still ignorable.

[ZMagnum]

All four of mine glow slightly. At first I thought something was wrong but...Oh well!! It's kinda cool looking and not even that noticeable unless you look directly at them.

I really, really love the blue light on the black interior at night :yes:
Our friends that have seen these now need my help finding which bulbs to use in their vehicles!

Mine do the same. I like the glow because it makes it easier to find the light to turn it on in the dark. It's sort of like a lighted switch.

[crazylikeacharger]

anyone else have when the cars off and you click the individual light on its really dim?

[crazylikeacharger]

soo who has had the leds in the longest. mine are on very dim even when the car is off. it doesnt draw enough power to make me worry right about a dead battery????

[eyevancsu]

I just realized that dim leds even when power is off (key off) could be a grounding issue. I used to build electronics stuff a few years back and anytime there was a short between the ground and positive, even with the switch off, the led would be dimly lit.

You can hook tons of leds to the car and itll power them for a few days probably before draining, they dont suck up much power at all.

-ivan

[elcobra44]

soo who has had the leds in the longest. mine are on very dim even when the car is off. it doesnt draw enough power to make me worry right about a dead battery????
:knockout: I'm having a vision........

I see you standing on the side of the road........

I see... anger.....

and something that looks like this:

http://www.cbr600rr.com/albums/album19/0d5a4a114d1b.jpg

On the bright side, I don't sense anything about a dead battery.

You'll be fine.. :)

[crazylikeacharger]

what the hell happened there!!!!!!

[elcobra44]

Faulty LEDs......




Nah.. :)

http://www.lxforums.com/board/showthread.php?t=28604&page=1&pp=10

[peter2772000]

...as Peter scurried to cancel the order on his LED lamps...

[elcobra44]

Haha, nono.. You'll love them.

[crazylikeacharger]

any background on what caused that fire???

[ZMagnum]

any background on what caused that fire???

I believe he just turned on his heated seats. He was out in the middle of nowhere so it took the fire dept. a while to get to his car. By then it was too late. One fried bannana.

[elcobra44]

http://www.lxforums.com/board/showthread.php?t=28604&page=1&pp=10
Check the link..

[SRTopdog]

Subscribing....

[titan]

Yeah, mine are incredibly dim unless I use the cabin lights (open a door or roll the dimmer). Here is the thing, back when I installed LED #1, it was dim when flipped on by itself , and when I turned on the map light next to it which stilled contained a regular stock bulb, it got bright. I now have both LEDs installed and both are dim unless I turn on the cabin lights, so I am wondering this. Are they both dim because BOTH are reversed (this is assuming the conclusion we are all coming to about it being a polarity issue is correct) or would they both be dim even if it is only one of the LEDs that is reversed?

edit: Whoever is saying that the polarity is causing them to be dim is incredibly wrong. I have switched around the bulbs into every combination of polarity and nothing changes. They are straight up DIM when using each lamp by itself as a reading lamp, to the point of being completely useless. Now, when you put use the cabin lights as a whole they work great, but what the hell am I gonna do driving down the road trying to look at something in the car with ALL my LEDs burning bright as hell?!

[titan]

In the continuing saga of the LEDs, my glove box light will not work when the LEDs are installed... Likewise, if a map/reading light is turned on and I open the glove box, the map/reading light turns off. The only way the reading light will stay on with the glove box open is to have the cabin lights on altogether, but no matter what, the glove box light will not work. Now, if I swap the light in the glove box with an LED, that will light up...

[elcobra44]

Uhm.. Better check your connections of the glove box light. How did you hardwire it?

[titan]

It is not the glove box light, and I wired it directly into the existing harness. I am not sure what was going on, but my lights were acting screwy period, even when I put the stock bulbs back in. Basically, when I rolled the dimmer to turn all the cabin lights on, they did, but they would turn off if you hit the buttons on them individually. If the cabin dimmer was not turned on, they did not light period. Figured something needed a reset so I started the car and shut it off and it fixed everything, including, for some reason, the dimming issue. Now everything works, with the LEDs in, and they are only dim when the key is not in the ignition. As soon as you insert the key and turn it to acc, they are fine.

So that should answer the questions everyone was having about why they were so dim. Except now I am also having this infamous glow people are talking about, too. That goes out after a minute or so as soon as you remove the key and open the door. If you get in a pitch black garage you will notice that your EVIC also has a orange glow to it but they turn themselves off completely after you shut everything down and wait a minute.

[elcobra44]

Glad you got it worked out!

You and crazylikeacharger need to get together and have a drink! :biggrin:

[titan]

Haha, yeah, if he reads this post and finds out how to fix his now that I screwed with them for 3 days. Go figure it was something so basic. I am debating whether I should swap my glove box light out with an LED to match...the yellow is bothering me when everything else is super white. Only things stopping me: when the car is not powered up the lights are dim...don't need a dim glove box. I already paid enough for shipping the cabin LEDs, not worth ordering another single one. The LED does not fit through the hole I Dremeled ut for the glove box switch so I would have to enlarge the hole.

[cdaboysfan]

Anyone worried about removing the heat shield? I'm wondering if that might cause too much heat and start a fire. I'm figuring it hasn't happened since no one has posted that problem. Unless they died in the fire?? Any thoughts.

Also, what about strain on the battery? I'm reading about the lights still being on even when the car is off. I understand it's not going to completely drain the battery but wouldn't that cause an early demise of the battery. Just a few thoughts.

I love those blue lights.

[PikeBoy98]

Hey ya'll. Maybe the issues you are having are the size of the bulb you are using?? The LX Forum site guys are using the 44mm bulbs in 300's. Also, autoillumination has a 300c page, and they are recommending the 44mm bulbs. Might be worth trying out.
http://www.autolumination.com/300c.html
Interior Bulbs
Glove box (Most Popular : Superstar or 5led matrix) http://autolumination.com/194.htm

Map light (Most Popular : 44mm 9 LED Rigid Loop) http://autolumination.com/festoon.htm

Dome light (Most Popular : 44mm 9 LED Rigid Loop) http://autolumination.com/festoon.htm

Step/Courtesy light (Most Popular : Superstar or 5led matrix) http://autolumination.com/194.htm

Trunk/Cargo area (Most Popular : 44mm 9 LED Rigid Loop) http://autolumination.com/festoon.htm

I'm just saying............

[potsyboy]

Anyone worried about removing the heat shield? I'm wondering if that might cause too much heat and start a fire. I'm figuring it hasn't happened since no one has posted that problem. Unless they died in the fire?? Any thoughts.

Also, what about strain on the battery? I'm reading about the lights still being on even when the car is off. I understand it's not going to completely drain the battery but wouldn't that cause an early demise of the battery. Just a few thoughts.

I love those blue lights.

I haven't had a problem although can't say I've had the lights on past a half hour. What is everyone using for the trunk light the one I bought is all wrong. Please advise!

[PikeBoy98]

Trunk light is the same light as your dome lights. It is the Festoon light. 212 I think.

[mywhitecharger]

I actually have some ERD-rated lights sitting on my table at home, waiting to be installed. They aren't LED's though.

http://www.lxforums.com/board/showthread.php?t=33938

Any luck with this?

[medfordcharger]

I've had my heat shields off for a few weeks now and I haven't got any melting or fires yet.

[vbouncer]

Great mod and I did all the lights that I could by folowwing this thread (Kudos). Does anybody know where to get the lights for the Vanity Visor area. The bulbs that are in there now are very small and I have tried a few different festoon type bulbs in varying sizes but they are all still too big. Length is ok either 31 or 34MM in length but its the diameter that too big, the light needs to be around 6-7MM in order for the cover to go back on the vanity. Any ideas????

[PikeBoy98]

Great mod and I did all the lights that I could by folowwing this thread (Kudos).

HELP!! My map lights are working great, but I cannot get the darn lights in the back seat pull handles to work. I got the same 194 bulbs as everyone else. Tried swtiching them around, putting both in, putting old bulbs back in (still work fine) and I can't get nothing to glow at all.

Does anyone have any tricks or advise?? Anyone bend a nib, crimp a wire, anything??

Thanks!!!

[PikeBoy98]

Anyone out there have any help for me?? I wanna get the ther two lights working in the back with these "194's".

[DeafCharger]

Anyone out there have any help for me?? I wanna get the ther two lights working in the back with these "194's".


Are you sure these 194s bulbs are working? It should be installed same way you installed stock lights. I know it's not enough room to place a bulb in rear passenger light but you can use a tool like a small plier to install.

[PikeBoy98]

Both bulbs have worked in the driver's side rear light, but I cannot get the passenger light to work. It worked when I put the original bulb back in. Weird. I actually took the entire pull handle assembly off of the ceiling to install the bulbs. large hands and awkward angle made it tough to just change the bulbs. We shall see if I can get it working this weeken with a little more patience. I used the 44mm Festoon's up front, and they fit good.

[Hemi 06]

Has anyone installed the new after market LED tail lights and the after market head lights? I was just curious as to how they look and how you like them.

[ManGO]

Im ready to order these, but I see that the 300c use the 44mm bulbs and there is mention of the 39mm bulb being a little short. Has anyone used the 44m bulb? or should I just stick with the 39's?

[titan]

Both bulbs have worked in the driver's side rear light, but I cannot get the passenger light to work. It worked when I put the original bulb back in. Weird. I actually took the entire pull handle assembly off of the ceiling to install the bulbs. large hands and awkward angle made it tough to just change the bulbs. We shall see if I can get it working this weeken with a little more patience. I used the 44mm Festoon's up front, and they fit good.

That sounds extremely similar to the issue I raised several posts back. And I reported that putting the stock bulbs back in, starting the car, killing the engine, then reinstalling the LEDs seemed to restart the electronics system and made them work again.

[PikeBoy98]

I will try the start the car again way. Maybe that will help. For now, I have the two dome lights in and the driver's side rear light in.

To answer the question regarding 39mm vs 44mm, I installed the 44mm like the website instructed where I bought the bulbs.

http://www.autolumination.com/300c.html

The 44mm ones fit great and work good. The lxforums site has issues with the bulbs staying on dimly and not working when you click the light. Mine are bright when I want them and they do not stay on when the car is turned off.

Merry Christmas!!!!!

[Hemi 06]

Does anyone know the bulbs that you will need to complete the whole interior of a 06 daytona? My dad brought home a Chrysler Aspen home and they come with the whole interior in the super white LED lights and I really want to get them now for my Charger. If anyone knows what lights I need i would be great. Thanks

[ManGO]

Pikeboy Thanks!
Just placed my order..

[Hemi 06]

looking back at past posts to ordered the bulbs to complete my lights inside my car. im sure its going to look great..i'll let everyone know how it looks when im finished the install

[Hemi 06]

just fyi..when installing lights make sure the leds are pointed down or you won't have that good of light shining. it will look like they aren't that bright at all. they look great installed!!

[HEMI911]

http://s121.photobucket.com/albums/o215/Hemi911/th_RC2A0281.jpg

I have had them for serveral months and love them

[HEMI911]

Sorry should have show a picture of them, so here it is.

http://s121.photobucket.com/albums/o215/Hemi911/th_P1010014.jpg

[ManGO]

Finally got mine in. Huge difference. I forgot to check if they are on dimly when the key is off. I do know that the 194 glow slightly when off tho.

I installed mine during the day. It was one of the easiest mods Ive done.
I forgot to check them at nite. I left for work this morning and opened my car to a huge surprise. Super White light. I musta turned the map light on and off at least a dozen times.

[QuickD]

when I am driving, they are glowing very very dim. I think I like it though, kind of shows where to touch if you want them to turn on.

then after I park and turn the car off, they stay dimly lit for a bit until the timer turns off. Its a few minutes, and then they turn off completely.
So open the door and act like your getting out, the lights come on and then go out after a bit. The leds still glow for a bit longer and then they turn off completely.

is there a way to get them not to glow.
I know some are ordering the longer bulbs for the front, but even the rears glow a bit so it cant just be the length can it?

[helbent]

my mom is nice

[TJRinNM]

Correct link - http://s12.photobucket.com/albums/a243/computermeister/Map%20light%20re-lamp/

Great photos to help with the front map lights, but where exactley are the tabs located to open the rear passenger lights?

[ManGO]

Great photos to help with the front map lights, but where exactley are the tabs located to open the rear passenger lights?

towards the front of the car. The back is the hook.
Also just incase you are an idiot like me the switch for the rear lights is in the lower right corner, I turned it on and could find the darn switch.


Honestly this mod is like 5 mins tops. just use a small and thin screwdriver.

[gdmuscle]

I was wondering has anyone tried using a LUXEON 3Watt LED or the K2's. These are if not brighter than the stock Map lights and Reading lamps. You can get them in 1 watt versions. The are bulk LEDS that you can mod to fit into the metal reflector since these things need a heatsink to actually keep them from over heating. The Star Hex luxeons are Hex shaped with mounting holes for mounting them on a heatsink or metal plate and you can add a resistor in series to drive the current down to the rated 350ma for 1W version or 1A for the 3Ws. You can also get a 5W almost equivalent to a 40W light bulb and rated at 750Ma . These things are bright don't try looking directly at them it's like looking at a flashbulb go off in your face. Look for them at Luxeonstar dot com.

Hope this helps you Led modders out there. By the way you can also use these for your Rear Tail lights but remember to use the 120 degree beam ones.

[Fix8ed]

I just transferred my blue LEDs to my SRT. Here's some pics:

http://img63.imageshack.us/img63/3180/dsc01218smallhk4.jpg

http://img63.imageshack.us/img63/8743/dsc01215smallna0.jpg

[ChargeIt2Tha Game]

Well bad news bears I just broke the tab on my rear driver side interior light cover:cry: Anyone know hows about to get a replacement??? Please cuz I'm about to throw up!!

[DeafCharger]

Well bad news bears I just broke the tab on my rear driver side interior light cover:cry: Anyone know hows about to get a replacement??? Please cuz I'm about to throw up!!


You can get one at local dealership. They probably will order one if they don't have it in stock.

[ManGO]

Anyone having an issue with these leds in the cold weather? I have one map light that doesnt glow when off. It realy no big deal but it kinda bugs me.

[ChargeIt2Tha Game]

Thanks Deaf, I'll see what the stealership has to say. :confused: I wonder if MPSC could get one perty cheap...I'll probably call them monday to see.

[tbone]

Thanks for all the great info guys. I finished installing my red leds and I love them! Such a nice, warm, red glow at night. I did get a super white for the trunk, but bought the wrong bulb. Oh well, I'll get to it eventually.

[06ChargerGuy]

i just installed the super white leds and i already got two compliments on them today!! kick ass!!!

[Jdub8080]

Super whites installed! looks real good, kind of a light blue look! everyone loves them, check out the pics! RECOMMEND TO EVERYONE~

http://pic30.picturetrail.com/VOL1509/6527921/15372529/233802950.jpg

http://pic30.picturetrail.com/VOL1509/6527921/15372529/233802978.jpg

http://pic30.picturetrail.com/VOL1509/6527921/15372529/233803010.jpg

[Sublimeon22s]

^^^Nice, i just put the superwhites in last week and LOVE the HID blue/white look. None of my bulbs have a permanent glow except one map light and its barely noticeable.

I also got the same HID look superwhites in the parking lights, make them look like mini HID projectors

Just added the superwhite LED for the license plate light yesterday, LOVE IT

Im going superwhite LED crazy, last thing i need to do is the reverse lights like the new caddys and im good!

I got all mine from vleds.com

[jarpod]

Super whites installed! looks real good, kind of a light blue look! everyone loves them, check out the pics! RECOMMEND TO EVERYONE~

http://pic30.picturetrail.com/VOL1509/6527921/15372529/233802950.jpg

http://pic30.picturetrail.com/VOL1509/6527921/15372529/233802978.jpg

http://pic30.picturetrail.com/VOL1509/6527921/15372529/233803010.jpg

Dude.... your signature says "window tent" I think you might want to double check on that one:grin:

[08MagRacer]

after reading through this thread im still not sure whether its 39mm or 44mm for the front interior lights?

[troycrna]

green led's in the sublime green charger, easiest install yet, work beautifully, very bright and glow when car is off but that dont bother me

[BOSChargerRT]

cool....don't let SublimeMa see those....

[ChargeIt2Tha Game]

In case there are any other jackasses who enjoy breaking things
(besides myself)
:whistle:
heres the part #'s for the rear courtesy light lenscovers

Rear Courtesy Left: 5137529AA
Right: 5137528AA

Front Maps Left:5137527AA
Right:5137526AA

[TJRinNM]

after reading through this thread im still not sure whether its 39mm or 44mm for the front interior lights?

I used the 44mm (rigid loop) for the front and trunk and they fit perfectly.

[goldberg1701]

I used the 44mm (rigid loop) for the front and trunk and they fit perfectly.

Make sure you get the ones with the rigid loop on them. The regular 44mm's don't quite fit right, although they still light up.

[187Proof]

Wow so many different opinions throughout this thread. So for now, I just want to do the LED's on my front MAPS as well as the one's in the backseat. I wanna do the super white, so can anyone point me in the absolute correct direction for EXACTLY what I'm needin here? :)

[merlin1]

i just did mine today......nasty! they look sooo much better than the crappy stock bulbs. im soo happy with these

[Bones1274]

I went down to Autozone and spent 3 bucks on the cheap red replacement bulbs for the rear. I left the heat shields in and they look great. I imagine they are not as bright as the LEDs but I am leaving the front bulbs white so I am not worried about them being super bright.

[ChargerIvy]

Great Post.

I have just purchase them from www.iJDMTOY.com

They carry both of them in stock at http://www.ijdmtoy.com/webpage/products/d42mm.htm for 44mm LED bulbs.

http://www.ijdmtoy.com/webpage/products/t15.htm for 194 LED bulbs.

Ask them for a bundle deal. I got 1 pair 44mm LED bulbs, 2 pairs 194 LED bulbs for just 29.99 plus 5.99 for S&H.

[DarthCharger]

Thanks for the info, but could you be more specific on bulb choice...looks nice!

I also would like additional information. The SRT owners manual provides the following specs:
REPLACEMENT LIGHT BULBS
LIGHT BULBS — Interior Bulb Number
Rear Courtesy/Reading Lights. . . . . . . . . . . . . . W5W
Rear Compartment (Trunk) Light . . . . . . . . . . . . . 562
Overhead Console Reading Lights. . . . . . . . . . . . . 578
Visor Vanity Lights . . . . . . . . . . . . . . . . . . . . . A6220
Glove Box Light . . . . . . . . . . . . . . . . . . . . . . . . . 194
Door Courtesy . . . . . . . . . . . . . . . . . . . . . . . . . . 562
Shift Indicator Light . . . . . . . . . . . . . . . . . JKLE14140
NOTE: For lighted switches, see your dealer for replacement
instructions.
All of the interior bulbs are glass wedge base or glass cartridge types. Aluminum base bulbs are not approved and should not be used for replacement.

I guess the C300 part numbers and therefore corresponding autoillunination part numbers are different because I can't find the SRT part numbers on their web pages. Any help would be appreciated.
Thanks in advice

[DarthCharger]

Ignore previous post.:redface: I just found the C300 owners manual and with the exception of the rear compartment trunk light, they are the same part numbers. None-the-less, I still could not find the part numbers for the C300 that correspond to the autoillumination parts numbers.:confused:

[gr8ride101]

OK im lost........ right now....which is it...39 or 44 there both different and there are some guys saying yea 39s are working great and others saying go 44 ??????? im dumb. so which one is it????

[Bloodaxe]

If you use blue lights for this mod, does it match the bluish light of the guages??

[1157_Plum]

Thanks for the super informative thread!

I realize that this is a rather old thread, but I was wondering if anyone has had any problems with these bulbs? I just purchased two of the blue 44mm 9-LED festoon bulbs to replace the front lights and two of the blue 194 5-LED Matrix bulbs to replace the rear lights.

This is for an 07' Daytona Charger ... I should have asked first, but I got excited by the pictures and made my purchase without thinking! :nervous s

Thanks for any info and thanks for the share,

1157_Plum

[ChargerGirl]

Thanks for the super informative thread!

I realize that this is a rather old thread, but I was wondering if anyone has had any problems with these bulbs? I just purchased two of the blue 44mm 9-LED festoon bulbs to replace the front lights and two of the blue 194 5-LED Matrix bulbs to replace the rear lights.

This is for an 07' Daytona Charger ... I should have asked first, but I got excited by the pictures and made my purchase without thinking! :nervous s

Thanks for any info and thanks for the share,

1157_Plum

I still have the same Red LEDs that I installed back in May of 2006. No problems. :)

[jarpod]

yup awesome mod! still have em and could not be happier
just bought some cold cathodes for the under dash and I will eventually install them
great and easy mod!

[1157_Plum]

Thanks for the confirmation!! I'm glad to hear that I didn't already order something that I would regret! ;)

When I ordered, I couldn't decide between the Blue and the UV ...

I was thinking that I had decided on Blue and that was what I thought I had ordered ... but I was mistaken. I ordered the UV instead.

Has anyone installed the UV? Anyone have pics? Has anyone seen them and know how purple they are and if they give off plenty of light?

Sorry for the million questions and thanks again and again!

1157_Plum

[07AWDRT]

DONT FORGET THE POOR LITTLE TRUNK LIGHT !!!

I HAVE ALL LEDs.... EVERYWHERE THERE WAS A FACTORY BULB, NOW AN LED

THE TRUNK IS CALLED A FESTOON-LOOP or something like that
THEY ARE ON EBAY SOMETIMES

[BSHAW27]

Thanks for the super informative thread!

I realize that this is a rather old thread, but I was wondering if anyone has had any problems with these bulbs? I just purchased two of the blue 44mm 9-LED festoon bulbs to replace the front lights and two of the blue 194 5-LED Matrix bulbs to replace the rear lights.

This is for an 07' Daytona Charger ... I should have asked first, but I got excited by the pictures and made my purchase without thinking! :nervous s

Thanks for any info and thanks for the share,

1157_Plum


The numbers you ordered don't seem to match what the original poster ordered. 39mm vs 44mm. Does this matter? Does it matter what year the car is?

[1157_Plum]

DONT FORGET THE POOR LITTLE TRUNK LIGHT !!!

I HAVE ALL LEDs.... EVERYWHERE THERE WAS A FACTORY BULB, NOW AN LED

THE TRUNK IS CALLED A FESTOON-LOOP or something like that
THEY ARE ON EBAY SOMETIMES

I thought about doing the trunk as well, but I really want to see how the UV color looks before buying more.


The numbers you ordered don't seem to match what the original poster ordered. 39mm vs 44mm. Does this matter? Does it matter what year the car is?

I read that the 44mm are perfect fits, but the 39mm will still work. I'm 90% sure it was in this thread that I read it.

Hope that helps. :)

1157

[Insidious_SRT]

I just ordered 100 dollars worth of LEDs from VLEDs.com. Front passenger lights 42mm (#578), Rear passenger Wedge lights (#194), Trunk light (#168), Reverse lights (#921), and the hardest one to find Vanity Visor lights, just click on new products in their website and they are located in that list. I measured the ones in my car to the picture measurements on the site, they are exact. The picture show 2 bulbs in each visor, the LX visors only take 1, they only come in packages of 1. Did a quick google search for coupon codes found out vleds is registered on a lexus forum and they created a coupon code CLUBLEX which saved me 10% my entire order. Once I get em I'll try and take pictures. Hope this helps for others.

[1157_Plum]

I just ordered 100 dollars worth of LEDs from VLEDs.com. Front passenger lights 42mm (#578), Rear passenger Wedge lights (#194), Trunk light (#168), Reverse lights (#921), and the hardest one to find Vanity Visor lights, just click on new products in their website and they are located in that list. I measured the ones in my car to the picture measurements on the site, they are exact. The picture show 2 bulbs in each visor, the LX visors only take 1, they only come in packages of 1. Did a quick google search for coupon codes found out vleds is registered on a lexus forum and they created a coupon code CLUBLEX which saved me 10% my entire order. Once I get em I'll try and take pictures. Hope this helps for others.

Please do! Good luck and wow ... you are going to have a lot of LEDs!

Has anyone seen the UV lights? Anyone have pics? Anyone know if they give decent light or ... ?

I'm really ready for these things to get in. ;)

1157_Plum

[DedSysOp]

Please do! Good luck and wow ... you are going to have a lot of LEDs!

Has anyone seen the UV lights? Anyone have pics? Anyone know if they give decent light or ... ?

I'm really ready for these things to get in. ;)

1157_Plum

I ordered the UV LED's on Wednesday(?) as soon as they come in I'll post some pictures. Also ordered the UV CCFL's for under the dash (got those by thursday!) Will try and do the install today after I get my tints done.

[1157_Plum]

I ordered the UV LED's on Wednesday(?) as soon as they come in I'll post some pictures. Also ordered the UV CCFL's for under the dash (got those by thursday!) Will try and do the install today after I get my tints done.

I ordered mine early Tuesday morning. :confused:

Just out of sheer stupidity, I have to ask: what are CCFLs?

1157_Plum

[Thad(deus)]

Just ordered some greens. And as a side note: AutoIlluminations website is very headache inducing.

[Insidious_SRT]

Just ordered some greens. And as a side note: AutoIlluminations website is very headache inducing.

I agree, which is honestly why I went else where.

[titan]

I ordered mine early Tuesday morning. :confused:

Just out of sheer stupidity, I have to ask: what are CCFLs?

1157_Plum

Usually just called CFL, they are Cold Cathode Flourescent Lamps. Like neon, but more durable and lighter and they don't require the giant high voltage transformer.

[1157_Plum]

Usually just called CFL, they are Cold Cathode Flourescent Lamps. Like neon, but more durable and lighter and they don't require the giant high voltage transformer.

Thanks for that. :)

I agree that the website could use a serious face-lift. Cumbersome and annoying come to mind when I think about the site ...

EDIT: I got my UV lights in the mail today and just finished getting them installed. Way too bright outside to even get an idea of what it will look like, so cross your fingers! :) By the way ... this was as simple and as easy as possible. I can't use my right arm and I was able to do this by myself in about fifteen minutes.

1157_Plum

[1157_Plum]

I didn't take any pics, but I'm really let down with these lights. I got the UV ones and while they make a pretty light ... it is almost impossible to see anything in the car.

I'm thinking of either getting a different color or putting the old bulbs back in.

On a good note: the purple looks pretty dang good. :)

1157_Plum

[DedSysOp]

Got the UV LED's installed on Saturday, need extension wires for the CFL's.
Actually the 'UV' LED's are not actually UV, just purple (my camera turns them blue for some odd reason) they don't set off uv reactive items like club stamp or drivers license (which is a good thing cuz this way I don't have to be as anal about keeping my car immaculate)
And as said above, while the ambiance they create is very cool, the are useless for reading stuff.

[DarthCharger]

I installed the red LEDs from Autoillumination in my SRT. I also installed the Billet Technologies 2PC Radio 3PC A/C Black Chrome Designer Series and the Black chamfered shift bezel insert. They look awsome because the red light reflects on these excellent BT parts. The reflections are subtile but look like individual points of light. Hard to describe but it looks super.
Later

[Hellbent]

Just ordered some greens. And as a side note: AutoIlluminations website is very headache inducing.


Maybe they took some inspiration from here:


http://cdn-www.cracked.com/articleimages/wong/2-8-08/dancingman-detroitsmisterx.gif

http://cdn-www.cracked.com/articleimages/wong/2-8-08/annoying-sprouticus.gif


http://cdn-www.cracked.com/articleimages/wong/2-8-08/dancingman-detroitsmisterx.gif



Bought from them anyway but man I had to take 2 advils once I finished

[Insidious_SRT]

LMFAO!! Hope I still see you on here tomorrow hellbent.

[Thad(deus)]

Maybe they took some inspiration from here:


http://cdn-www.cracked.com/articleimages/wong/2-8-08/dancingman-detroitsmisterx.gif

http://cdn-www.cracked.com/articleimages/wong/2-8-08/annoying-sprouticus.gif


http://cdn-www.cracked.com/articleimages/wong/2-8-08/dancingman-detroitsmisterx.gif



Bought from them anyway but man I had to take 2 advils once I finished

They must have!! LEDs are here, time to hit the garage.

[photopro]

I want to order interior led's and decided to read your experiences 1st. I was originally going to order from aac style.com. My concerns from your experiences are the constant on after the car is off:confused:, and not coming up to full power when the key is out. I live in Buffalo NY and it gets very cold; tough environment on car batteries. I can live with on:driving: in the car since the radio screen is bright anyway, but i'm worried about battery drain if they dont go off... any advice or encouragement to go for it:beerchug:?! just started doing mods in an 08 charger...
thanks!!

[Insidious_SRT]

Once you have turned off your vehicle and exited they will remain glowing ever so slightly. They do however completely fade out after sometime just sitting there. I've had mine installed for over 6 months now, and have not had any problems with battery draining.

[RScottyL]

For those of you that are interested, Advanced Automotive Concepts has the following LED kits for your car:

Dodge Charger Complete LED Conversion Package (http://www.automotivelightstore.com/index.asp?PageAction=VIEWPROD&ProdID=235) - $69.99

(Fits all Year/Model Dodge CHARGER)

Includes:
- (2) 44mm 6 LED Boards for Map Lights
- (2) T-10 5 LED Rear Handle Lights
- (1) 44mm 6 LED Board1 for Trunk Light
- (2) T-10 1 LED License Plate Light
- (2) T-15 9 LED Reverse Lights
- (2) 31mm 6 LED Boards for Vanity Lights (ships separately)


Color Options of Warm White, Cool White, Red, and Blue.

Options of 1 Chip and 3 Chip Brightness.

Vanity Lights will automatically be 6 LED White.


http://www.automotivelightstore.com/ProductImages/oracleled/charger%20dodge%20complete%20interior%20led%20ligh ts%20upgrade%20package%20map%20dome%20license%20pl ate%20vanity.jpg

They also have just an interior kit:

Dodge Charger Interior LED Conversion (http://www.automotivelightstore.com/index.asp?PageAction=VIEWPROD&ProdID=207) - $27.99

LED Interior Kit for Dodge Charger.

Includes Two (Bulb #578) 44mm 6 LED boards for Map Light and Two 194 (T-10) LED bulbs for the side handles. Plug and Play installation, all 4 lights take about 5 min to install.

Color Options of Warm White, Cool White, Red, and Blue.

http://www.automotivelightstore.com/ProductImages/oracleled/charger%20interior%20kit.jpg

[photopro]

I saw these kits advertised. I read on the forum someone had oracles and they flickered. could just be their car. I also checked out vled.com. I am after brightness more then color, function over show... I can live with a sllight glow after the car if off for a few minutes...it will either be the interior kit from oracle or separates from vled. I'll post my results.
thanks again!!

[bwhite220]

I know i've already said this a million times but I ALWAYS buy my LEDs from www.v-leds.com. I have NEVER received a broken bulb and they are super easy to work with if you have questions or what not.

The links below will take you directly to the LED(s) you will need if you are going to completely outfit your car with LEDs. If you choose to buy from V-LEDs (http://www.v-leds.com), you will need the following for your charger:


Front Map Lights (http://www.v-leds.com/Shop/Control/Product/fp/vpid/4481172/vpcsid/0/SFV/32481/sret/14219210172222232102192822272262832142292142872182 35236291222231230297226231238227238237240233240249 238243)
Vanity Mirror in Sun Visor (http://www.v-leds.com/Shop/Control/Product/fp/vpid/4481128/vpcsid/0/SFV/32481/sret/14219210172222232102192822272262832142292142872182 35236291222231230297226231238227238237232237236245 252251)
Rear Seat LEDs (http://www.v-leds.com/Shop/Control/Product/fp/vpid/4481033/vpcsid/0/SFV/32481/sret/14219210172222232102192822272262832142292142872182 35236291222231230297226231238227238239232243232243 236235)
Trunk LED (http://www.v-leds.com/Shop/Control/Product/fp/vpid/4481127/vpcsid/0/SFV/32481/sret/14219210172222232102192822272262832142292142872182 35236291222231230297226231238227238237234249234237 250249)
License Plate LED (http://www.v-leds.com/Shop/Control/Product/fp/vpid/4481133/vpcsid/0/SFV/32481/sret/14219210172222232102192822272262832142292142872182 35236291222231230297226231238227238237238241250251 234247)


**These Links take you directly to the LEDs I purchased for my Charger. They are all the Super White LEDs. If you are looking for different colors, let me know.

Two things to keep in mind when you go to install these LEDs:


For the Front Map Lights and the Back Seat Lights, you have to remove the metal reflector so that the LED light will fit. It is very easy to remove and once you plug in your LEDs, the metal reflectors become worthless. Just trash those things.
When you plug in any LED light and test it, if it doesn't come on, unplug it and turn it around.


Again, this mod is super easy and well worth the investment. Other than it looking bad azz, it will also help if you acidentally leave any interior lights on when you leave your car. Because LEDs require so little energy to opperate, you could literally leave them on for like 5 days in a row before you get a dead battery. It has saved my butt a number of times after my wife drives my car!!!

[Insidious_SRT]

Also from VLEDs.com for the front map lights if you wanna go brighter than the 9 LEDs, they sell a 20 LED size 211 that also fits. I have these installed in my map lights and they are hella bright. Little bit more expensive than the 9 LED but well worth it. Here's the link

http://www.v-leds.com/Shop/Control/Product/fp/vpid/5108588/vpcsid/0/SFV/32481/sret/14219210172222232102192822272262832142292142872182 35236291222231230297226231238227238237240233240249 238243

[bwhite220]

Also from VLEDs.com for the front map lights if you wanna go brighter than the 9 LEDs, they sell a 20 LED size 211 that also fits. I have these installed in my map lights and they are hella bright. Little bit more expensive than the 9 LED but well worth it. Here's the link

http://www.v-leds.com/Shop/Control/Product/fp/vpid/5108588/vpcsid/0/SFV/32481/sret/14219210172222232102192822272262832142292142872182 35236291222231230297226231238227238237240233240249 238243

Holy Crap! I can only imagine how bright those things are! I have the 9LED and I think they are extremely bright!!! Can you post a pic??

[Insidious_SRT]

Holy Crap! I can only imagine how bright those things are! I have the 9LED and I think they are extremely bright!!! Can you post a pic??

Ya, I'll see what I can do tonight.

[Pyrate]

The Vled site HIDs look pretty good.
I see they are 35 watt. Does that not cause a problem?
I thought the charger was 50 watt?

Might have to try these guys, looks good
AAC's not happy with

[Insidious_SRT]

I haven't forgot about that pic. I just can't find my camera.