View Full Version : Arizona Modsquad Gtg 4/8/06
DAYTONA_R/T
03-30-2006, 04:52 PM
So since there are a few of us with mods on order, Lets do a Modding GTG.
http://www.chargerforums.com/forums/attachment.php?attachmentid=5820&stc=1&d=1143762372
The GTG will be held at Gearhead Garage in Gilbert.
here is a link to the website for the shop.
http://gearheadgarageinc.net/index.html
The time for the GTG to start will be posted in the next few days.
So here is the deal, you can bring your mods to the GTG, or contact Matt and pre-order a mod through him at WHOLESALE, for this GTG only. Contact Matt via the website above for pricing information. (they are an authorized dealer for Bassani, Borla and magnaflow as well as many other brands)
So if the mod bug has bitten you, and you would rather do the install while standing under the car, rather then laying on your back, this is your chance.
The cost for use of the garage is $15 hr per vehicle lift we use. And with the aid of forum members, we should be able to get through a bunch of mods in no time... (and come on, isn't $15 hr worth not laying on your back under the car?)
List of attendies and what will be installed:
Daytona R/T: Hotchkis Sways
AZcharger: lost self control... mods already installed
06blueCharger: guage pod
UA WHO: Hanging out
R/Tommy: Hanging out
(Matt the owner of the shop is also a member of 300cforums.com and owns a Dodge Ram Daytona and a 300C)
UA_who
03-30-2006, 05:39 PM
This sounds like a good deal. I just ordered the Dynamax Long Tube headers, and was going to have my dealer install them.
This may be easier - and cheaper :D
Khaleal
03-30-2006, 05:42 PM
Only if they have a dyno.
ChargerChick
03-30-2006, 10:40 PM
Help me find some Mopar duals and I'm there!
(I have a jet chip due any day now and some vent shades that I'm afraid I might break trying to put them in.)
UA_who
03-31-2006, 08:22 AM
Help me find some Mopar duals and I'm there!
(I have a jet chip due any day now and some vent shades that I'm afraid I might break trying to put them in.)
Try here:
www.moparsupercenter.com
Part # 82209611
Dual Exhaust System, V6
Mopar Stainless steel Exhaust system will add the additional sound you are looking for. These catback exhaust systems include chrome tips and are installed utilzing all existing OEM mounting locations.
$413.70
R/TommyB
03-31-2006, 09:54 PM
good idea, but one week too late.
ChargerChick, when did you add that to your sig?
ChargerChick
03-31-2006, 10:26 PM
good idea, but one week too late.
ChargerChick, when did you add that to your sig?
Add what Tommy? Will Ferrell and the cowbell? It's been there for a few weeks now.
DAYTONA_R/T
04-01-2006, 03:35 AM
good idea, but one week too late.
ChargerChick, when did you add that to your sig?
Tommy,
if you dont have any mods to do, swing by and say hello...
:D
UA: so are you in for this?
Khaleal: sorry bud, no dyno at his shop to my knowledge, unless he got one since the last time I was at his shop.
DAYTONA_R/T
04-01-2006, 03:39 AM
Help me find some Mopar duals and I'm there!
(I have a jet chip due any day now and some vent shades that I'm afraid I might break trying to put them in.)
Hey did you see my message on TOS?
I will swing by tomorrow as no one is ever at the accessories desk when I tried calling...
UA_who
04-01-2006, 06:13 AM
Tommy,
if you dont have any mods to do, swing by and say hello...
:D
UA: so are you in for this?
Khaleal: sorry bud, no dyno at his shop to my knowledge, unless he got one since the last time I was at his shop.
I just called Matt, and actually set up an appointment for them to install the headers. I think it would take me too long to do, even with the lift and everyone's help there.
He's going to do it on Friday. But I might stop in on Sat to BS a bit and lend a hand if necessary. What time is everyone going to be there?
06blueCharger
04-01-2006, 07:48 AM
If I can get my guage pod by then I am in!! But I doubt it will be here as I only ordered it yesterday
MArc
ChargerChick
04-02-2006, 03:41 PM
Hey did you see my message on TOS?
I will swing by tomorrow as no one is ever at the accessories desk when I tried calling...
Ummm....what is TOS?
And why does everything have to be on a Saturday??? Don't you guys know that SOME people have to work on Saturdays?
DAYTONA_R/T
04-02-2006, 03:43 PM
Ummm....what is TOS?
And why does everything have to be on a Saturday??? Don't you guys know that SOME people have to work on Saturdays?
TOS = the other site :tongue:
ChargerChick
04-02-2006, 04:03 PM
TOS = the other site :tongue:
DOH! I am such an http://img.photobucket.com/albums/v486/sunsfan412/funny%20stuff/idiot2.gif
DAYTONA_R/T
04-02-2006, 11:27 PM
updeated list
R/TommyB
04-04-2006, 09:42 PM
Add what Tommy? Will Ferrell and the cowbell? It's been there for a few weeks now.
Perhaps...but it used to say "cowbell"...until mine showed up on TOS as "Charger".:hairy:
I spent the last two weekends wrenching, so I'm just hanging out. What about tools? Do I need to bring any?
ChargerChick
04-04-2006, 10:11 PM
Yeah....I changed it. :D
DAYTONA_R/T
04-04-2006, 10:12 PM
Perhaps...but it used to say "cowbell"...until mine showed up on TOS as "Charger".:hairy:
I spent the last two weekends wrenching, so I'm just hanging out. What about tools? Do I need to bring any?
Nope, no need to bring anything.
Hell from the looks of it I will be the only one doing mods... azcharger had no self control and installed his bassani kit today... so the modding gtg is now a watch me mod my car gtg... :dead: LOL
R/TommyB
04-04-2006, 11:27 PM
Thief!
CC is a thief!
DAYTONA_R/T
04-07-2006, 04:28 PM
Got a call from Matt at Gearhead Garage today. We will be rescheduling as he has an emergency that he has to attend to, and his shop will be closed over the weekend...
R/TommyB
04-07-2006, 05:52 PM
Actually, that's good. My car definitely needs a bath after that dirt rain on Wednesday night. Might as well do the spring in-depth wax.
vBulletin® v3.7.2, Copyright ©2000-2009, Jelsoft Enterprises Ltd.