See how BILLET BUTTONS are etched!

[kris@thehoffmangroup]

For a limited time ALL forum members will RECEIVE FREE ETCHING on all billet switches.*

*Must mention this forum to receive offer!

CHECK OUT THE BILLET SWITCHES HERE (http://www.thehoffmangroup.com/keepitclean/product.lasso?prodinc=billetbuttons&r=5024)

http://i83.photobucket.com/albums/j316/KRISTINA_ASH/th_KeepItClean_BilletButtons.jpg (http://s83.photobucket.com/albums/j316/KRISTINA_ASH/?action=view&current=KeepItClean_BilletButtons.flv)

[The Tran]

Very nice.

[kris@thehoffmangroup]

You can get pretty much ANYTHING etched on the buttons

[Anguish]

This is absolutely happening in the next couple days. The white illuminated 16mm latching switches are exactly suited for my car and application. They'll be my halo switches. Given how much Billet Tech satin-finish stuff I've got on my car, this product is very, very compelling.

Payday in four days! I guarantee I'm ordering a few.

I see the etching already; FRONT, REAR, and DASH. It's so exciting I could spit.

[kris@thehoffmangroup]

Contact me when your ready

[Anguish]

I'm working on nailing down the colours I need. That's the final step before I can order.

One question in the interim. I reviewed the installation documentation and it's all exactly what I expected for any typical latched switch. The only thing I'm not seeing is specification of voltage requirement for the LED illumination. I'm guessing you've designed these to accept typical 12V input but I don't want to fry these when I install them. If I need to step the voltage down, it'd be nice to know so I can head out and buy the right goodies to do so.

For the record, I'm looking at a few 16mm latching switches.

Oh, and one other question comes to mind. This is the domed version, right? And non-domed are just flush versions of this?
http://files.thehoffmangroup.com/largeimages/SW38W.jpg

Thanks.

[kris@thehoffmangroup]

Yes 12volts to light the LEDs...The domed version is pictured..the non domed is flush

[chargedviper]

So how do we go about for choosing what we want etched?

[Anguish]

So how do we go about for choosing what we want etched?

Not a horrible question, as it happens.

And just to let you know, Kris, I'm still waiting on a colour decision pending another vendor's reply.

[kris@thehoffmangroup]

So how do we go about for choosing what we want etched?

You can create your own image or use one of our pre-designed images.

You can email or call me if it would be easier for you when ordering.

[kris@thehoffmangroup]

Not a horrible question, as it happens.

And just to let you know, Kris, I'm still waiting on a colour decision pending another vendor's reply.

No problem!!

[Anguish]

No problem!!

I know my order isn't going to be huge, but I mean what I say in general. I'm still waiting for AAC to post pictures of a newly announced product in different colours so I can select my buttons. Sooner or later you might win and I'll just buy both of the options I'm thinking of. I'll be wanting to get these installed within the next month, so I can't sit on the trigger much longer.

[kris@thehoffmangroup]

No problem. 1 switch or 20 switches your order will be handled in the same matter!

[Anguish]

No problem. 1 switch or 20 switches your order will be handled in the same matter!

I appreciate that.

Order #190692 has been issued.

Contains 3 16mm latching switches.

Please apply etching as follows:
WHITE switch: FRONT
RED switch: TAIL
BLUE switch: DASH

Thanks a million for your patience, and of course the product. These are just perfect for what I'm planning.

[kris@thehoffmangroup]

I appreciate that.

Order #190692 has been issued.

Contains 3 16mm latching switches.

Please apply etching as follows:
WHITE switch: FRONT
RED switch: TAIL
BLUE switch: DASH

Thanks a million for your patience, and of course the product. These are just perfect for what I'm planning.

Did you order online?

[Anguish]

Did you order online?

I did. I got a call and provided the etching details to them. I've got an e-mail invoice and I'm on the phone now getting this special applied to the order. Thanks.

[kris@thehoffmangroup]

Sweet. They called me to confirm your order.